Skip to main content

previous disabled Page of 2
and
  1. No Access

    Article

    Improvement of Hot Rolling Technology to Reduce the “Rolled-in Scale” Defect

    Based on the results of the published literature and production experience, technical and technological measures were developed and implemented to reduce the «rolled-in scale» defect: collectors with water des...

    S. I. Platov, R. R. Dyoma, O. R. Latypov, V. S. Banshchikov in Steel in Translation (2023)

  2. No Access

    Article

    Development of an Efficient Acid Pickling Bath for Hot-Rolled Steel Coil

    The work aims to understand the influence of oxide scales and chloride ions on the pickling behaviour of hot-rolled steel coil. The thickness and nature of the oxide scale (such as the content of the phases an...

    Srinivas Palli, Jagannath Majhi, V. S. Raja in Transactions of the Indian Institute of Me… (2022)

  3. No Access

    Chapter

    Carbon Spheres and Carbon Soot for Tribological Applications

    The undesired implications systems are well known, and the urge to reduce them has led to many materials being explored . In the quest for super-lubricating materials over the past few (1D) are be...

    Nowduru Ravikiran, Pawan K. Jain, Vadali V. S. S. Srikanth in Advanced Nanomaterials (2022)

  4. No Access

    Article

    Oxidation Behaviour of Ni-Base Superalloys in Supercritical Water: A Review

    In the quest for creating a sustainable future, coal-fired boilers and nuclear reactors are increasingly moving towards higher steam temperatures and pressures that can help in reducing emissions and increase ...

    Bhagwat Ghule, C. Sundaresan in Journal of the Indian Institute of Science (2022)

  5. No Access

    Article

    Thin Zn1 – xMnxO Films (x = 1–4 at %) by Chemical Bath Deposition: Influence of Dopant Concentration

    Thin films of Zn1–xMnxO (x = 1–4 at %) were applied onto a glass substrate by low-cost chemical bath deposition (CBD). The films were characterized by XRD, UV–VIS absorption spectra, SEM, and vibrating sample mag...

    G. R. Patil, M. B. Shelar, N. J. Kambale in International Journal of Self-Propagating … (2021)

  6. No Access

    Chapter

    Hydrothermal Method for Synthesis of Materials

    Hydrothermal method of synthesis has emerged as the primary choice for synthesizing several strategic materials. The application of this method has diversified in the last few decades into several advanced fie...

    V. S. Tripathi in Handbook on Synthesis Strategies for Advanced Materials (2021)

  7. No Access

    Article

    Challenges in the Development of Electrochemical Reduction of TiO2 to Titanium Metal

    Electrochemical reduction of metal oxides to metal has been gaining attention world over due to inherent advantages of simplicity of the process, energy savings and minimal environmental burden compared to con...

    Chaganti R. V. S. Nagesh in Transactions of the Indian Institute of Metals (2020)

  8. No Access

    Article

    Enhancing the Environmentally Assisted Cracking Resistance of Aircraft Quality Al Alloy of Type AA7075 Stiffened with Polymer Matrix Composite Using Cerium Chloride Inhibitor

    This study explores a methodology to raise environmentally assisted cracking resistance of alclad Al–Zn–Mg–Cu (AA7075) alloy, used in aircraft structures, stiffened with polymer matrix composite asymmetric pat...

    S. S. Kale, V. S. Raja, A. K. Bakare in Transactions of the Indian Institute of Metals (2018)

  9. No Access

    Article

    On Chemical Synthesis of Electrochemical Reduction of Titanium Dioxide (TIO2) to Titanium Metal

    The process of electrochemical reduction of titanium dioxide to titanium metal has been studied in detail through extensive experimentation in grams scale to 5–8 kg scale. The objective of this study has been ...

    G. Govinda Rajulu, M. Girish Kumar in Transactions of the Indian Institute of Me… (2016)

  10. No Access

    Article

    Evaluation of the Competitiveness of Wall Building Materials with Glassy Protective-Decorative Coatings Obtained by Plasma Fusing

    The results of research on the development of a desirability scale for evaluating the competitiveness of wall building materials with glassy protective-decorative coatings obtained by plasma fusing are present...

    V. S. Bessmertnyi, N. I. Min’ko, N. I. Bondarenko, A. V. Simachev in Glass and Ceramics (2015)

  11. No Access

    Article

    Synthesis and characterization of cobalt–nickel alloy nanowires

    We report on the synthesis and magnetic characterization of ordered arrays of cobalt–nickel alloy nanowires. These alloy nanowires were electrodeposited into the pores of anodic alumina templates. The physical...

    S. Talapatra, X. Tang, M. Padi, T. Kim, R. Vajtai in Journal of Materials Science (2009)

  12. No Access

    Article

    Charge transfer at the antiscale composite layer-electrolyte interface

    Properties of composite coatings based on oxide layers formed on a titanium surface using the plasmic electrolytic oxidation method and processed using Forum® superdispersed polytetrafluorinethylene were inves...

    S. V. Gnedenkov, S. L. Sinebryukhov, D. V. Mashtalyar in Protection of Metals (2007)

  13. No Access

    Article

    Structural characterization and thermally stimulated discharge conductivity (TSDC) study in polymer thin films

    The electrical conductivity of naphthalene doped polystyrene (PS) films (≈61·58 μm thick) was studied as a function of dopant concentration and temperature. The formation of charge transfer (CT) complexes and ...

    V. S. Sangawar, R. J. Dhokne, A. U. Ubale in Bulletin of Materials Science (2007)

  14. No Access

    Article

    Size dependent optical characteristics of chemically deposited nanostructured ZnS thin films

    ZnS thin films of different thicknesses were prepared by chemical bath deposition using thiourea and zinc acetate as S2− and Zn2+ source. The effect of film thickness on the optical and structural properties was ...

    A. U. Ubale, V. S. Sangawar, D. K. Kulkarni in Bulletin of Materials Science (2007)

  15. No Access

    Chapter and Conference Paper

    PHYSICAL PROCESSES ON THE SURFACE OF FIELD EMISSION CATHODES BASED ON CARBON NANOSTRUCTURAL MATERIALS

    The degradation mechanism of field emission cathodes based on carbon nanostructural materials was investigated in the presented work. Emission current instability came from the adsorption desorption processes ...

    V.S. BORMASHOV, Ev.P. SHESHIN in Hydrogen Materials Science and Chemistry o… (2007)

  16. No Access

    Chapter and Conference Paper

    DESCRIPTION OF PHASE EQUILIBRIUMS IN INTERMETALLIC COMPOUNDS WITHIN THE PERTURBATION THEORY

    A phase equilibriums in intermetallic compounds hydrides in the area of disordered α-,β -phase in the framework of the model of non-ideal lattice gas are description. LaNi5 hydride was chosen as the subject for t...

    V.S. MARININ, Yu. F. SHMAL’KO in Hydrogen Materials Science and Chemistry o… (2007)

  17. No Access

    Chapter and Conference Paper

    TECHNICAL AND TECHNOLOGICAL METHODS OF REALIZATION OF STEAM CATALYTIC CONVERSION OF NATURAL GAS WITH A METHANE-WATER PROPORTION CLOSE TO STOICHIOMETRIC RATIO

    The experimental results and also results of industrial tests on realization of the catalytic conversion of the natural gas in a warmed pipe with the purpose of reception of a gas mix of CO and H2 without H2 and ...

    V.S. IGUMNOV in Hydrogen Materials Science and Chemistry of Carbon Nanomaterials (2007)

  18. No Access

    Chapter and Conference Paper

    INTERBAND ELECTRON TRANSITIONS IN THE ALLOYED C60 FILMS WITH THE IONIC DEFECT FORMATION

    The spectral dependence of photoluminescence and optical conductivity for the solid C60 and Cd-C60 films (with the admixture of C70 fullerenes) are studied under irradiation by argon ions with different doses.

    O.P. DMYTRENKO, N.P. KULISH in Hydrogen Materials Science and Chemistry o… (2007)

  19. No Access

    Article

    Thermally stimulated discharge conductivity in polymer composite thin films

    This paper describes the results of thermally stimulated discharge conductivity study of activated charcoal-polyvinyl chloride (PVC) thin film thermoelectrets. TSDC has been carried out in the temperature rang...

    V. S. Sangawar, P. S. Chikhalikar, R. J. Dhokne in Bulletin of Materials Science (2006)

  20. No Access

    Article

    Characterization of nanocrystalline cadmium telluride thin films grown by successive ionic layer adsorption and reaction (SILAR) method

    Structural, electrical and optical characteristics of CdTe thin films prepared by a chemical deposition method, successive ionic layer adsorption and reaction (SILAR), are described. For deposition of CdTe thi...

    A. U. Ubale, R. J. Dhokne, P. S. Chikhlikar in Bulletin of Materials Science (2006)

previous disabled Page of 2