45 Result(s)
within
Shashi Prakash Dwivedi
-
Article
Effect of process parameters on tensile strength of friction stir welding A356/C355 aluminium alloys joint
In the present investigation, A356/C355 aluminium alloys are welded by friction stir welding by controlling various welding parameters. A356 and C355 aluminium alloys materials have a set of mechanical and phy...
-
Article
RETRACTED ARTICLE: Effect of Process Parameters on Tensile Strength of 1018 Mild Steel Joints Fabricated by Microwave Welding
This paper presents an experimental study on the tensile strength of 1018 mild steel plates joined by microwave welding. Three different microwave ovens with rated power of 800, 850, and 900 W and fixed freque...
-
Article
RETRACTED ARTICLE: Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology
In this study, a simple roller burnishing tool was made to operate burnishing processes on A356/5%SiC metal matrix composite fabricated by electromagnetic stir casting under different parameters. The effects o...
-
Article
RETRACTED ARTICLE: Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting
Electromagnetic stir casting is one of the simplest ways of producing defect free aluminum matrix composites. This work focuses on the fabrication of aluminum matrix composites reinforced with various weight p...
-
Article
Optimization of laser transmission joining process parameters on joint width of PET and 316 L stainless steel joint using RSM
In the present investigation, joining speed, laser power and stand-off distance were took up as joining process parameters in determining the laser transmission joining between PET films and 316 L stainless st...
-
Article
Mechanical and metallurgical characterizations of AA2014/eggshells waste particulate metal matrix composite
Chicken eggshell (ES) is an aviculture byproduct that has been listed worldwide as one of the worst environmental problems. The effective utilization of chicken eggshell (ES) biowaste is strongly encouraged in...
-
Article
Characterization of waste eggshells and CaCO3 reinforced AA2014 green metal matrix composites: A green approach in the synthesis of composites
Three AA2014 alloy metal matrix composites containing reinforcing particles of eggshell, carbonized eggshell and CaCO3 (powder) were processed. The influences of different particle percentage of eggshell were com...
-
Article
Friction and Adhesive Wear Study of HVOF Sprayed Ni–WC–Co-Based Powder Coating
Ni-based alloys are being widely used to improve the wear resistance of various industrial components in normal and severe environments and addition of rare earth elements to these alloys further improves the ...
-
Article
Retraction Note: Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology
The Editor-in-Chief of the journal has retracted this article titled “Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology” [1] due to...
-
Article
Retraction Note to: Effect of Process Parameters on Tensile Strength of 1018 Mild Steel Joints Fabricated by Microwave Welding
The Editor has retracted this article (1) because concerns have been raised regarding some of the figures. Figure 3 part B appears to be a copy of Figure 3 part A, with some alterations.
-
Article
Effect of Magnesium Addition on Mechanical Properties of Al-Fly Ash Green Composite Produced Under Green Ultrasonic Vibration Process
In the present investigation an effort has been made to produce Al-Fly ash green composite using liquid state stir casting technique followed by green ultrasonic vibration such that it can improve wettability ...
-
Article
Physico-Chemical, Mechanical and Thermal Behaviour of Agro-waste RHA-Reinforced Green Emerging Composite Material
Ceramic particles such as SiC, \(\hbox {Al}_{{2}}\hbox {O}_{{3}}\)Al2O3 and \(\hbox {B}_{{4}}\)B4C are most commonly used as reinforcement particles while develo** composite materials. The industries producing ...
-
Article
Utilization of Chrome Containing Leather Waste in Development of Aluminium Based Green Composite Material
Leather industries are produced lots of hazardous waste in the town areas. Due to which level of soil and air pollutants are increasing day by day. These wastes also harm human health especially children and o...
-
Article
Retraction Note to: Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting
The Editors-in-Chief have retracted this article [1] due to concerns with Figs. 1, 2, 3 and 5.
-
Article
Experimental and Numerical Investigation of Quasi-Static (10−3 s−1) Fracture Behavior of Armor Steel
In this investigation, a numerical approach has been used for predicting the quasi-static strain rate (10−3 s−1) hardening and damage behavior for armor grade steel Armox 500T at ambient temperature. The power-la...
-
Article
Effect of Friction Stir Process Parameters on Mechanical Properties of Chrome Containing Leather Waste Reinforced Aluminium Based Composite
Nowadays, there is a lot of environmental pollution due to the wastes generated by the industries. In particular, the waste generated by leather industries produces more environmental pollution. Chrome contain...
-
Article
Development of Aluminium Based Composite by Utilizing Industrial Waste and Agro-Waste Material as Reinforcement Particles
The inclusion of agricultural wastes in aluminium-based metal matrix composites (AMMC) is gaining popularity because this will strengthen particulate matter present in AMMC, improving the composite materials' ...
-
Article
Influence of Nano-CuO on Synthesis and Mechanical Behavior of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminum Based Composite
In the present study, an attempt has been made to utilize spent alumina catalyst (SAC) waste as well as grinding sludge (GS) waste in the development of aluminum-based composite material. Nano-CuO particles ha...
-
Chapter and Conference Paper
Effect of MgO Powder Addition in Synthesis of Recycled Waste Bagasse Reinforced Green Composite Materials
Bagasse waste comes out from the sugar mill. This waste often causes pollution in many ways outside the sugar mill. Also, when bagasse waste rots, it gives rise to various viruses. This virus causes great harm...
-
Article
Investigation of geo-mining green roof seismic energy balancing with resin bolting by Universal Drilling Machine: a novel energy-absorbing-based support system
Roof bolt reinforcement of stratified carboniferous and fragile strata is a popular way of roof support in underground mines. The manifestation of strain energy of strata generated during coal winning generate...
