Skip to main content

16 Result(s)

within S. V. Kolpakov Remove this filter

and

  1. No Access

    Article

    Nanotechnology in the metallurgy of steel

    S. V. Kolpakov, V. A. Parshin, A. N. Chekhovoi in Steel in Translation (2007)

  2. No Access

    Article

    Aleksandr georgievich shalimov — His sixtieth year

    S. V. Kolpakov, V. I. Matorin, Yu. S. Karabasov in Metallurgist (1998)

  3. No Access

    Article

    July 15 — Metallurgists' day

    S. V. Kolpakov in Metallurgist (1979)

  4. No Access

    Article

    Rammed linings for 160-ton steelcasting ladles

    The production technology was developed for a silica ramming compound from fine-grained semialiphatic Chasov-Yar quartz sand. The production technology was adopted by the Semiluk Refractories Plant.

    A. K. Karklit, Yu. D. Kuznetsov, B. A. Velikin, L. M. Davydov… in Refractories (1975)

  5. No Access

    Article

    Forty years of the Novo-Lipetsk Metallurgical Plant

    S. V. Kolpakov in Metallurgist (1974)

  6. No Access

    Article

    Firing difficult-to-sinter high-purity dolomite with oxygen

    A technology was developed for firing difficult-to-sinter dolomites in the crushed state which yields an adequately dense powder not contaminated to an appreciable degree with fusing agent.

    V. G. Abbakumov, V. G. Borisov, G. Sh. Ashkinadze, Yu. S. Rodgol'ts… in Refractories (1974)

  7. No Access

    Article

    Gas-flame guniting of the lining of intermediate continuous steel-casting ladles

    As a result of laboratory investigations and rig testing of the flame guniting of intermediate ladles for continuous steel-casting plant we recommend the following bodies: 90% corundum, 10% sodium tripolyphosp...

    L. M. Demidenko, B. A. Velikin, V. A. Dovbysh, S. V. Kolpakov… in Refractories (1973)

  8. No Access

    Article

    Batchers of sintered alumina

    R. S. Churakova, E. P. Fedorova, Yu. A. Polonskii, S. V. Kolpakov… in Refractories (1971)

  9. No Access

    Article

    Rammed lining of the intermediate ladles of continuous steel casting units

    L. A. Tseitlin, K. N. Repenko, E. V. Merkulova, A. K. Mendelenko… in Metallurgist (1971)

  10. No Access

    Article

    Rational firing cycle for converter lining

    The firing of linings in converters made from tar-bonded refractories should be done with portion loading of coke in amounts of 200 kg, with careful control of the oxygen consumption. The temperature relations...

    V. G. Borisov, A. I. Andryushchenko, V. Ya. Gushchkin, I. D. Chigrai… in Refractories (1971)

  11. No Access

    Article

    Progress at the Novo-Lipetsk plant

    S. V. Kolpakov in Metallurgist (1971)

  12. No Access

    Article

    Lining steel tap** apertures of oxygen converters

    The use of blocks for lining steel discharge apertures substantially reduces the number of repairs, and cuts their work content.

    I. D. Chigrai, S. V. Kolpakov, A. M. Pozhivanov, Yu. E. Gorbenko… in Refractories (1970)

  13. No Access

    Article

    Increasing the resistance of oxygen converter linings

    We developed a. differentiated construction for converter linings using tarred dolomite and periclase — spinel refractories in sites most prone to erosion: the throat, the neck, and the upper cylindrical parts...

    A. P. Likhoradov, L. I. Teder, I. D. Chigrai, S. V. Kolpakov… in Refractories (1970)

  14. No Access

    Article

    Soft tar-dolomite refractories with an increased coke residue

    An increase in the coke residue of normally employed coal-tar bond substantially increases the concentration of residual carbon in tardolomite refractories, and improves their density and strength in the coked...

    V. G. Borisov, A. I. Andryushchenko, V. Ya. Gushchin, E. Ya. Shapiro… in Refractories (1969)

  15. No Access

    Article

    Metering component for continuous casting of aluminum-deoxided steel

    Scale growth in the channel of the metering component during the pouring of steel deoxidized by 2.2–2.5 kg/ton of aluminum is influenced by: the amount and composition of the nonmetal impurities; the material ...

    A. K. Karkit, L. Ya. Fridman, O. V. Nosochenko, N. I. Sautkin… in Refractories (1969)

  16. No Access

    Article

    The peoduction of tar-dolomite refractories and experiments for increasing their stability in converter linings

    A regime for rotary calcining difficult-to-sinter Shchelkov dolomites has been developed which ensures the stable production of clinker with an apparent density (volumetric weight) of not less than 3.0 g/cm3.

    A. P. Likhoradov, I. V. Frantsenyuk, L. I. Teder, I. D. Chigrai… in Refractories (1968)