Skip to main content

previous disabled Page of 1,673
and
  1. No Access

    Article

    Combined First-Principles and Machine Learning Study of Thermal Transport and Thermoelectric Properties of p-type Halide Perovskite CsCdX3 (X = Cl, Br)

    The thermal transport and thermoelectric properties of CsCdX3 (X = Cl, Br) were investigated using first-principles calculations and machine learning interatomic potentials. The lattice thermal conductivity was o...

    Wenqiu Shang, Tao Hu, Ding Li, Shichang Li, **anju Zhou in Journal of Electronic Materials (2024)

  2. Article

    Correction: Study on Roof Deformation and Failure Law of Close Distance Coal Seams Mining Based on Digital Image Correlation

    S. L. Yang, Q. Li, H. Yue, D. Z. Kong, G. Y. Wu, S. Yang in Experimental Techniques (2024)

  3. No Access

    Article

    The Investigation of Preload Relaxation Behavior of CFRP Bolted Joints Under Thermal-Oxygen Environment: Modeling and Experiments

    In this paper, the effects of interference-fit sizes and service environment temperature on the preload and relaxation of CFRP bolted joints are investigated based on an ultrasonic monitoring method. Specimens...

    Xuda Qin, Gongbo Feng, **anming Meng, Sai Zhang, Shipeng Li in Applied Composite Materials (2024)

  4. No Access

    Article

    Investigation on the Design and Application of Hydraulic Loading Fatigue Test Device for Non-Vascular Stent

    The implanted non-vascular stent is prone to fatigue fracture due to the periodic cyclic load caused by long-term physiological motion in the non-vascular lumen.

    Y. Li, J. Li, M. Mao, H. Yin, X. Ni, C. Pan in Experimental Techniques (2024)

  5. No Access

    Article

    Effect of Annealing Stress on the Magnetic Properties of High-Grade Non-oriented Electrical Steel

    Effect of annealing stresses on the magnetic properties of non-oriented electrical steel has been studied. When the annealing stress increases from 2.5 to 4.5 MPa, the iron loss P1.0/400 of non-oriented electrica...

    Shengjie Wu, Wanlin Wang, Chongxiang Yue in Metallurgical and Materials Transactions A (2024)

  6. No Access

    Article

    Effects of Re3+ (Re = Y, La, Gd) Co-do** on Luminescence Properties of MSi2O2N2:Eu2+ (M = Ca, Sr) Phosphors

    Re3+ ions (Re = Y, La, Gd)-doped MSi2O2N2:Eu2+ (M = Ca, Sr) phosphors were prepared by the solid-state reaction method. The effects of co-dopants (Y3+, La3+, Gd3+) and Eu2+ do** concentration on the luminescent...

    Tao Wei, Long Wang, Heyun Xu, Chaoyong Deng, Fei Long in Journal of Electronic Materials (2024)

  7. No Access

    Article

    Giant Topological Bandgap and Rashba Effect in Decorated Plumbene: A First-Principles Study

    Materials with large Rashba spin splitting (RSS) and quantum spin Hall effect (QSHE) are extremely important in spintronic device applications. Based on first-principles calculations, we present H–Pb–OH, a two...

    Wenming Xue, Yanyan Lu, ** Li, Chaoyu He, Tao Ouyang in Journal of Electronic Materials (2024)

  8. Article

    Open Access

    A Comparison of Internal Mandrel Designs for Rotary Draw Bend Forming of Carbon-fibre/Thermoplastic (PA6) Tubular Structures

    Carbon fibre reinforced thermoplastic tubular structures can be post-formed into desired curvatures via rotary draw bending (RDB) at elevated temperatures. During this process, a rigid internal mandrel is requ...

    Mengyuan Li, Chris Stokes-Griffin, John Holmes in Applied Composite Materials (2024)

  9. No Access

    Article

    Effect of Mn Contents on Microstructure Evolution and Recrystallization Behavior of 18.5 Pct Cr Low-Nickel Type Duplex Stainless Steel During Multi-pass Hot Compression

    This study examined the effect of manganese (Mn) contents (3.12 to 8.97 pct) and three-pass deformation distributions on dynamic recrystallization (DRX) and dislocation evolution during hot compression of low-...

    Qing Yang, Yinhui Yang, Shiyu Wu, Gaoling **a in Metallurgical and Materials Transactions A (2024)

  10. No Access

    Article

    Effect of Bricks-and-Mortar Architecture on Fracture Behavior of SiCp/Al Composite: A Finite Element Analysis

    The metal-matrix composites (MMCs) with biomimetic bricks-and-mortar architectures have been experimentally demonstrated to exhibit excellent strength-ductility match. Here, biomimetic bricks-and-mortar archit...

    **ang Gao, **aonan Lu, Xuexi Zhang, Mingfang Qian, Aibin Li in Applied Composite Materials (2024)

  11. No Access

    Article

    Enhancing the Thermal Conductivity of Laser Powder Bed Fusion AlSi20 by Introducing a Novel TiC–Ti Coated Diamond Powder

    The formation of pores induced by the poor wettability of diamond with the AlSi20 matrix for the powder bed fusion using a laser beam (PBF-LB) process largely deteriorates the thermal conductivity. This study ...

    L. L. Cui, L. Zhang, Y. F. Yang, S. F. Li in Metallurgical and Materials Transactions A (2024)

  12. No Access

    Article

    The Laminated/Network Interface Design and Deformation Behavior of Multilayer Steel

    The SUS304/45 multilayer steels with laminated/network coupling interfaces were fabricated by cold rolling, and the interface evolution behavior and strengthening–toughening mechanism were clarified by microst...

    Jiale Ding, Baoxi Liu, Boyang Zhang in Metallurgical and Materials Transactions A (2024)

  13. No Access

    Article

    Assessment of Delamination Damage in Carbon Fibre Reinforced Polymer Composites with a Fastener Under Multiple Lightning Strike Conditions

    Internal delamination damage in carbon fibre reinforced polymer (CFRP) composites occurs easily after a fastener is installed. To determine the internal delamination damage in CFRPs with a fastener under light...

    **angyu Tian, **ru Sun, Wei Sun, Xueling Yao, **anchao Xu in Applied Composite Materials (2024)

  14. No Access

    Article

    Microstructure of Batch Hot-Dip Zn-5 Wt Pct Al Coatings: Comparison of Ball-Milling Pretreatment and Conventional Pretreatment

    Instead of pickling and solvent fluxing in the conventional batch hot-dip galvanizing, ball-milling pretreatment was used to study the crystal orientation of the Q235 steel surface and the structure growth of ...

    Zhiwei Li, Shijun Zhou, Yulong Zhou, in Metallurgical and Materials Transactions A (2024)

  15. No Access

    Article

    Solubility Product of Aluminum Nitride in Steels: Thermodynamic Calculations

    Thermodynamic models were employed to determine the solubility product of aluminum nitride in steels containing the solid solution elements of Mn, Ni, Cr, and Mo. Specific solubility product expressions were d...

    Li Sun, Peng Wang, Xuan-Wei Lei, Jie Chen in Metallurgical and Materials Transactions A (2024)

  16. Article

    Current Progress in Aqueous Corrosion of Multi-Principal Element Alloys

    While multi-principal element alloys (MPEAs) remain a promising class of materials owing to several attractive mechanical properties, their corrosion performance is also unique. In this concise review, we pres...

    M. Ghorbani, Z. Li, Y. Qiu, P. Marcus in Metallurgical and Materials Transactions A (2024)

  17. No Access

    Article

    Fluorescent DNA tetrahedral probe with catalytic hairpin self-assembly reaction for imaging of miR-21 and miR-155 in living cells

    A CHA-based fluorescent DNA tetrahedral probe (FDTp) has been designed to detect the microRNAs miR-21 and miR-155 sensitively and specifically in living cells. The design consisted of functional elements (H1,...

    Shan Wang, Jiejie Guang, Yahui Gao, Bingyuan Fan, Yan Liang, **ru Pan in Microchimica Acta (2024)

  18. No Access

    Article

    Improving catalytic performance of (Ba, Ca) (Ti, Sn)O3 piezoelectric ceramics by regulating phase structure

    Piezocatalysis is considered as an evolving technology based on the piezoelectric properties of catalysts, has shown great potential in the field of environmental remediation, water splitting, and biotechnolog...

    ** Peng, Litao Tan, Jiaqi Chen in Journal of Materials Science: Materials in… (2024)

  19. No Access

    Article

    Potential of V-Si72, V-C72, and V-Al36N36 as catalysts for oxygen reduction reaction

    The capacities of V-Si72, V-C72, and V-Al36N36 nanocages to catalyze the ORR processes have been investigated. The acceptable pathways of ORR processes on V-Si72, V-C72, and V-Al36N36 nanocages have been examined...

    Dujuan Li in Journal of Molecular Modeling (2024)

  20. No Access

    Article

    Quantitative comparison of bile acid glucuronides sub-metabolome between intrahepatic cholestasis and healthy pregnant women

    Because of the pathological indication and the physiological functions, bile acids (BAs) have occupied the research hotspot in recent decades. Although extensive efforts have been paid onto BAs sub-metabolome ...

    Wei Li, **ngcheng Gong, **aoya Niu, Yuxuan Zhou in Analytical and Bioanalytical Chemistry (2024)

previous disabled Page of 1,673