-
Article
The strength and fracture toughness of polycrystalline magnesium oxide containing metallic particles and fibres
The transverse rupture strength of hot-pressed and annealed composites of magnesium oxide and dispersed metallic phases (nickel, iron, cobalt) increases with increasing volume fraction of metal and annealing t...
-
Article
The strength and fracture toughness of polycrystalline magnesium oxide containing metallic particles and fibres
The transverse rupture strength of hot-pressed and annealed composites of magnesium oxide and dispersed metallic phases (nickel, iron, cobalt) increases with increasing volume fraction of metal and annealing t...
-
Article
The microstructure and fracture properties of MgO crystals containing a dispersed phase
MgO crystals containing up to 40% by volume of magnesioferrite and up to 2% by volume of iron and nickel were produced by a diffusion technique followed by appropriate heat treatments. Magnesioferrite precipit...
-
Article
The microstructure and fracture properties of MgO crystals containing a dispersed phase
MgO crystals containing up to 40% by volume of magnesioferrite and up to 2% by volume of iron and nickel were produced by a diffusion technique followed by appropriate heat treatments. Magnesioferrite precipit...
-
Article
A transmission electron microscope study of glass-ceramics
A technique for preparing thin foils of glass-ceramics for transmission electron microscopy has been developed, using a combination of chemical, abrasion and ion-beam machining. This has permitted a study of t...
-
Article
The strength and fracture properties of glass-ceramics
The effect of an isothermal heat-treatment on the strength and fracture surface energy of a glass-ceramic derived from a lithium silicate glass has been studied. It is found that the strength and effective sur...
-
Article
Fabrication of translucent magnesium aluminate spinel and its compatibility in sodium vapour
The sintering behaviour of magnesium aluminate spinel on both sides of the stoichiometry has been investigated. It is found that the composition close to the stoichiometric composition, but slightly enriched i...
-
Article
Ultrasonic through-transmission method of evaluating the modulus of elasticity of Al2O3–ZrO2 composite
The elastic properties of Al2O3–ZrO2 composite were determined from ultrasonic velocity measurements, and were found to be dependent upon the amount of ZrO2 phase, the compacting pressure of the green ceramic ...
-
Article
Tribological evaluation of diamond coating on pure titanium in comparison with plasma nitrided titanium and uncoated titanium
Titanium alloys are characterized by poor tribological properties, and the traditional use of titanium alloys has been restricted to nontribological applications. The deposition of a well adherent diamond coat...
-
Article
Improvements in α-Fe2O3 ceramic sensors for reducing gases by addition of Sb2O3
The microstructure, electrical properties and gas-sensing characteristics of Sb-doped α-Fe2O3 were investigated. Powder precursors with Sb/Fe = 0–0.1 were prepared by chemical coprecipitation method. Sb-doped α-F...
-
Article
Effect of aluminum nitride on the properties of cordierite
The low dielectric constant and thermal expansion coefficient of cordierite are two attractive properties for the material to be used in electronic applications. However, compared to some other materials such ...
-
Article
Phase evolution, microstructure, and gas-sensing characteristics of the Sb2O3–Fe2O3 system prepared by coprecipitation
Precursor powders with antimony-to-iron (Sb/Fe) atomic ratios ranging from 0 to 2.0 were prepared by chemical coprecipitation. The origin of enhanced gas-sensing behavior at a higher calcining temperature was ...
-
Article
Dielectric Behavior of Diamond Films
Nanostructured diamond films have been synthesized using microwave plasma enhanced chemical-vapor-deposition methods. The dielectric behavior has been investigated by using impedance spectroscopy up to 500°C. ...
-
Article
Improvements in the sinterability of commercial CeO2 powder by addition of MnO2
-
Article
Sintering of Co-doped CeO2 powder
-
Article
Sputtering effects on magnetic properties of BaM thin film
-
Article
Mechanical and electrical properties of (Ce1−x Zr x )0.85Gd0.15O2−δ ceramics (0 ≤ x ≤ 0.5)
-
Article
Sintering behavior and ionic conductivity of Ce0.8Gd0.2O1.9 with a small amount of MnO2 do**
A 20% GdO1.5 doped ceria solid solution with a small amount of MnO2 do** (≤5% molar ratio) was prepared via the mixed oxide method from high-purity commercial powders with grain size around 0.2–0.5 µm. X-ray d...
-
Article
Preparation and electrical properties of dense submicron-grained Ce0.8Gd0.2O2 − δ ceramics
-
Article
Conductivity drop and crystallites redistribution in gold film
Electrical conductivity of Au film deposited on Si(100), Si(111) and BK7 glass substrates, ranging from 20 nm to 1000 nm, was measured. Conductivity drop and a decrease of averaged crystallite size are observe...