Skip to main content

and
  1. No Access

    Article

    Protic Oligosilsesquioxane Dicationic Ionic Liquids with Two Types of Ionic Sites in Organic Frame

    A method of synthesis of oligomeric siloxane protic ionic liquids capable of condensation reactions has been developed as starting compounds in the obtaining proton exchange membranes for fuel cells. Their org...

    V. V. Shevchenko, M. A. Gumenna, N. S. Klimenko in Theoretical and Experimental Chemistry (2022)

  2. No Access

    Article

    Anomalous Increase in Ionic Conductivity in Peo-Containing System Segmented Polyurethane – Segmented Oligourethane with LiClO4

    A method of obtaining a solid polymer electrolyte for lithium-ion batteries based on polyethylene oxide-containing (PEO) supramolecularly organized system segmented polyurethane – segmented oligourethane with ...

    V. V. Shevchenko, A. G. Belous, A. V. Stryutsky in Theoretical and Experimental Chemistry (2022)

  3. No Access

    Article

    Influence of Solvent on Stability and Electrophysical Properties of Organic–Inorganic Perovskites Films CH3NH3PbI3

    The influence of DMF and DMSO solvents on the properties of organic–inorganic perovskite films obtained at the ratio of starting reagents PbI2:CH3NH3I = 1:2 was studied. It was found that a dense film is formed f...

    P. V. Torchyniuk, O. I. V’yunov, L. L. Kovalenko in Theoretical and Experimental Chemistry (2021)

  4. No Access

    Article

    Effect of impurities on the electrical properties of the defect perovskite Li0.33La0.57TiO3

    A perovskite phase with the composition Li0.33La0.57TiO3 modified with up to 7 wt % Bi2O3, SiO2, Li3PO4, or Li3BO3 has been prepared by solid-state reactions. The samples in the LLTO–Li3PO4, LLTO–Bi2O3, and LLTO–...

    B. A. Lineva, S. D. Kobylyanskaya, L. L. Kovalenko, O. I. V’yunov in Inorganic Materials (2017)

  5. No Access

    Article

    Codo** of scandium-containing zirconia-based solid electrolytes with iron, cerium, and copper oxides

    Codo** with iron, cerium, and copper oxides has been proposed as a means of improving the performance of scandium-containing zirconia-based solid electrolytes. We have examined three procedures for the synth...

    O. Z. Yanchevskii, L. L. Kovalenko, A. G. Belous in Inorganic Materials (2016)

  6. No Access

    Article

    Lithium–air cell with lanthanum–lithium titanate ceramic electrolyte

    The La0.56Li0.33TiO3 ceramic with the structure of defect perovskite and high conductivity of (2-4) × 10–3 S cm–1 at the room temperature is obtained. Ceramic electrolyte based on La0.56Li0.33TiO3 is developed fo...

    A. G. Belous, G. Ya. Kolbasov, E. I. Boldyrev in Russian Journal of Electrochemistry (2015)

  7. No Access

    Article

    Synthesis of thin-film electrodes based on LiPON and LiPON-LLTO-LiPON

    Thin lithium-conducting amorphous films of lithium phosphorus oxynitride (LiPON) are synthesized by high-frequency (HF) magnetron sputtering. The effect of sputtering conditions (HF power, support temperature,...

    A. G. Belous, O. I. V’yunov, L. L. Kovalenko in Russian Journal of Electrochemistry (2014)

  8. No Access

    Article

    Intercalation processes influence the structure and electrophysical properties of lithium-conducting compounds having defect perovskite structure

    The structural features and electrophysical properties of lithium-conducting compounds having defect perovskite structure based on Li0.5La0.5Nb2O6 and Li0.5La0.5TiO3 were studied using X-ray diffraction and synch...

    O. I. V’yunov, O. N. Gavrilenko, L. L. Kovalenko in Russian Journal of Inorganic Chemistry (2011)

  9. No Access

    Article

    Control of radiation ellipticity by rotation of a plane-parallel crystal plate

    P. S. Andreev, O. Yu. Pikul’, L. L. Kovalenko, M. A. Voityuk in Russian Physics Journal (2008)

  10. No Access

    Article

    Preparation and electrical properties of Pb(Mg1/3Nb2/3)O3-PbTiO3 solid solutions

    Ceramic samples of lead magnesium niobate (PMN) and (1 − x)Pb(Mg1/3Nb2/3)O3xPbTiO3 (PMN-PT) solid solutions with x = 0, 0.05, 0.10, and 0.30 have been prepared by solid-state reactions, and their structural, ele...

    A. G. Belous, O. Z. Yanchevskii, O. I. V’yunov, N. V. Mazhara in Inorganic Materials (2008)

  11. No Access

    Article

    BaTi1−x SnxO3 Solid Solutions: Solid-Phase and Sol-Gel Syntheses and Characterization

    Ba(Ti1−x Snx)O3 solid solutions were synthesized by the sol-gel process and solid-phase reactions, and their electrophysical properties studied. SnCl4 · 5H2O, TiCl4, and BaCO3 were precursors in t...

    S. A. Solopan, A. G. Belous, O. I. V’yunov in Russian Journal of Inorganic Chemistry (2008)

  12. No Access

    Article

    Effect of fluorine do** on the microstructure and electrical properties of barium-titanate-based ceramics

    The effect of partial fluorine substitution for oxygen on the properties of BaTiO3 has been studied using thermogravimetry, x-ray diffraction, electron microscopy, complex impedance measurements, and diffuse refl...

    O. I. V’yunov, A. G. Belous, L. L. Kovalenko, V. F. Zinchenko in Inorganic Materials (2007)

  13. No Access

    Article

    Substrate effect on the properties of La0.775Sr0.225MnO3 films

    La0.775Sr0.225MnO3 films have been produced by screen printing on various substrates (Al2O3, BaTi0.85Zr0.11Sn0.04O3, Ba0.996Y0.004TiO3, Ba0.996Y0.004TiO3 + 0.04%Mn, and Ba0.996Y0.004Ti0.65Sn0.35O3), and their ele...

    S. A. Solopan, O. I. V’yunov, A. I. Tovstolytkin, L. L. Kovalenko in Inorganic Materials (2007)

  14. No Access

    Article

    Electrical properties of BaTi1−x M x O3 (M = Nb, Ta, Mo, W) ceramics

    The electrical properties of BaTi1−x M x O3 (M = Nb, Ta, Mo, W) ceramics (partial substitution of Group V (Nb, Ta) or VI (Mo, W) metals on the titanium si...

    O. I. V’yunov, L. L. Kovalenko, A. G. Belous in Inorganic Materials (2006)

  15. No Access

    Article

    Oxidation of reduced Y-doped semiconducting barium titanate ceramics

    Oxidation-induced microstructural changes in reduced yttrium-doped barium titanate (Ba1 − xY x Ti 1 − x 4+ Ti ...

    O. I. V’yunov, L. L. Kovalenko, A. G. Belous, V. N. Belyakov in Inorganic Materials (2005)

  16. No Access

    Article

    Oxidation of reduced Y-Doped semiconducting barium titanate ceramics

    Oxidation-induced microstructural changes in reduced yttrium-doped barium titanate (Ba1-xYxTi 1-x 4+ Ti x 3+ ...

    O. I. V’yunov, L. L. Kovalenko, A. G. Belous, V. N. Belyakov in Inorganic Materials (2005)

  17. No Access

    Article

    Effect of the Distribution of Manganese Ions on the Properties of Mn-Doped (Ba,Y)TiO3 PTCR Ceramics

    The electrical properties and microstructure of (Ba,Y)TiO3 PTCR ceramics were studied. The results indicate that the Mn ions increase the intergranular barrier height and produce a high-resistance layer on the gr...

    O. I. V'yunov, L. L. Kovalenko, A. G. Belous, V. N. Belyakov in Inorganic Materials (2003)

  18. No Access

    Article

    Effect of Isovalent Ba-Site Substitutions on the Properties of (Ba1 – xy M y Y x )TiO3(M = Ca, Sr, Pb) PTCR Ceramics

    An approach is proposed for fabricating fine-grained, low-resistivity BaTiO3-based PTCR ceramics via partial isovalent substitutions on the Ba site. The grain size of the ceramics thus prepared is shown to decrea...

    A. G. Belous, O. I. V'yunov, L. L. Kovalenko, V. Buscaglia in Inorganic Materials (2003)