-
Article
Tensile and High-Cycle Fatigue Properties of Die-Cast SEN6 Magnesium Alloy
This study investigates the microstructural characteristics, tensile properties, and high-cycle fatigue properties of a die-cast Mg–6Al–0.1Mn–0.1Zn–0.3Ca–0.2Y (SEN6) alloy with high corrosion and ignition resi...
-
Article
Aging Hardening and Precipitation Characteristics of Extruded Mg–9Al–0.8Zn–0.2Mn–0.3Ca–0.2Y Alloy
In this study, an Mg–9Al–0.8Zn–0.2Mn–0.3Ca–0.2Y (AZXW9100) alloy having high corrosion and ignition resistance characteristics is recently developed. This study investigates the aging hardening and Mg17Al12 preci...
-
Article
Tensile and High-Cycle Fatigue Properties of Extruded AZ91–0.3Ca–0.2Y Alloy with Excellent Corrosion and Ignition Resistances
Mg–Al–Zn–Ca–Y (SEN) alloys have been recently developed by adding small amounts of Ca and Y to commercial Mg–Al–Zn (AZ series) alloys. These alloys possess superior corrosion and ignition resistances to their ...
-
Article
A deep learning algorithm may automate intracranial aneurysm detection on MR angiography with high diagnostic performance
To develop a deep learning algorithm for automated detection and localization of intracranial aneurysms on time-of-flight MR angiography and evaluate its diagnostic performance.
-
Chapter and Conference Paper
Quantitative Relationship Analysis of Mechanical Properties with Microstructure and Texture Evolution in AZ Series Alloys
The present study investigated the correlation between , , and of AZ31 sheets. , microstructural and factors have a decisive influence on due to their specific c/a ratios for hexagonal close-packed st...
-
Article
Grain-Refined AZ92 Alloy with Superior Strength and Ductility
Grain-refined AZ92 (GR-AZ92) alloy with superior tensile properties is developed by adding 1 wt% Zn and a very small amount of SiC (0.17 wt%) to commercial AZ91 alloy for enhancing the solid-solution strengthe...
-
Chapter and Conference Paper
Investigation of Grain Refinement Method for AZ91 Alloy Using Carbide Inoculation
Grain refinement is an effective method to increase both the strength and toughness of structural materials. Among the various grain refinement methods, carbon inoculation is an effective method for Mg alloys ...
-
Chapter
Effect of inoculation method of refiner on the grain refinement of AZ91 alloy
Grain refinement involving inoculation of a grain refiner was investigated for application to a commercial Mg alloy. Cylindrical pellets composed of a mixture of MnCO3 and carbon powder with several different rat...
-
Chapter
Effects of Texture and Alloying Elements on Stretch Formability of Mg Alloy Sheets
A study has been made on the effects of texture and alloying elements on stretch formability of Mg alloys. AZ31, AT31, and ZX11 alloys having different textures have been subjected to uniaxial tensile loading ...
-
Article
Effect of Initial Grain Size on Microstructure and Mechanical Properties of Extruded Mg-9Al-0.6Zn Alloy
The effect of initial grain size on the microstructural evolution and tensile properties of an extruded Mg-9Al-0.6Zn alloy was investigated using homogenized billets with grain sizes of 411 and 87 μm. It is found...
-
Article
Design of rotor profile of internal gear pump for improving fuel efficiency
The internal gear pump has been widely used in vehicles because of durability and downsizing, but torque and noise of rotor in the pump have been required to be improved for fuel efficiency. In this study, sha...
-
Article
A study on integrated design for manufacturing processes of a compressed natural gas composite vessel
Compressed natural gas (CNG) composite vessels for vehicles consist of a dome part of the liner, a cylinder part of the liner, and a composite layer, and different kinds of manufacturing processes are required...
-
Article
Optimal design for compressed natural gas composite vessel by using coupled model with liner and composite layer
In this study, CNG (Compressed natural gas) composite vessel is analyzed by using a coupled model with liner and composite layer. For the coupled model, the method by using theoretical analysis and FEA is sugg...
-
Article
Optimum design of pipe bending based on high-frequency induction heating using dynamic reverse moment
Pipe bending by high-frequency local induction heating is an advanced technique used to bend pipes having a small bending radius and a large diameter. Although pipe bending is a widely used engineering process...
-
Article
Development of a new gerotor for oil pumps with multiple profiles
The use of an internal lobe pump is suitable for enhancing the oil hydraulics of machine tools, automotive engines, compressors, constructions and various other applications. In particular, the pump is an esse...
-
Article
A study on flow characteristics and discharge coefficients of safety valve used in LNG/LNG-FPSO ships
The safety valves used in liquefied natural gas — floating production storage and offloading (LNG-FPSO) ships play an important role in maintaining a fixed pressure by controlling the release of liquefied natu...
-
Article
A study on optimal design and fatigue life of the common rail pipe
To support the latest automobile technology, the next generation of diesel engines is expected to require higher injection pressures than the third generation which can operate at high injection pressures up t...
-
Article
Titanium dioxide inclusion in backing reduce the photoallergenicity of ketoprofen transdermal patch
Ketoprofen (KP) is a widely used transdermal non-steroidal anti-inflammatory drug. However, increasing number of adverse effect case reports suggests that KP transdermal formulation can cause photoallergic rea...
-
Article
Development of an apparatus for removing magnetic sludge by permanent magnets setup in the condenser of the power plant
In this paper, permanent magnets are used to remove magnetic sludge in the condenser of the power plant. To obtain the flow characteristics and magnetic information that are needed for determining a proper des...
