-
Article
Evaluation of the Residual Strength of a Polyester/E-Glass Composite Tray After Exposure to High Temperatures Due to a Nearby Fire Event
The mechanical behavior of pultruded polyester/E-Glass trays was evaluated as a function of high temperature exposure time at 250°C. This temperature was chosen based on the composite’s thermal behavior, which wa...
-
Article
Effect of surface treatments on the dynamic mechanical behavior of piassava fiber–polyester matrix composites
The effect of several fiber surface treatments upon the dynamic mechanical behavior of piassava fiber-reinforced composites was evaluated. In the light of the experimental results obtained the critical volume ...
-
Article
Thermal analysis of less common lignocellulose fibers
The thermal behavior of four unusual lignocellulose fibers — namely Caroa, Curaua, Piassava and Sponge gourd — is described. Caroa and Curaua fibers showed a more homogeneous thermal degradation, with a single...
-
Article
Elastic properties of degraded polypropylene
Even though the ultimate mechanical properties of degraded polymers are widely reported in the literature, few papers dealt with the elastic properties of polymers after submitted to a degradation source. This...
-
Article
Evaluation of the critical fiber length of piassava (Attalea funifera) fibers using the pullout test
-
Article
Correlation between the impact energy and the glass transition temperature of DGEBA based epoxy systems
-
Article
Flexural mechanical properties of piassava fibers (Attalea funifera)- resin matrix composites
-
Article
Mechanical behavior of cellulignin based composites
A powder derivative of acid pre-hydrolysis processing of cellulosic wastes, known as cellulignin, was used as filler in resin matrix composites. The flexural mechanical properties of cellulignin-polyester, epo...
-
Article
The effect of a chemical treatment on the structure and morphology of coir fibers
-
Article
Water absorption by sponge gourd (luffa cylindrica)-polyester composite materials
-
Article
Sugar Cane Bagasse Waste as Reinforcement in Low Cost Composites
The State University of the North of Rio de Janeiro State is currently engaged on a large development program to exploit the potentialities of sugar cane industry in a self sustained nonpolluting program. Suga...
-
Article
An investigation on the tensile strength of particulate filled polymeric composites
The validity of a semi-empirical equation previously developed for the yield strength evaluation of particulate composites is extended to predict the ultimate tensile strength of composites that do not show la...
-
Article
The Role of the Resin Matrix/Hardener Ratio on the Mechanical Properties of Low Volume Fraction Epoxy Composites
The mechanical performance of composite materials is usually associated with the properties of their reinforcement. However the matrix materials also play an important role as is the case for thermoset resin m...
-
Article
Analysis of the fracture surface morphology of an epoxy system as a function of the resin/hardener ratio
-
Article
Macromolecular network heterogeneity and crazing in thermosets
-
Article
Fibre-matrix interface and natural fibre composites