Skip to main content

and
  1. No Access

    Chapter and Conference Paper

    Effects of Head Rotation and Depth Enhancement in Virtual Reality User-Scene Interaction

    Immersive experiences with virtual reality systems are normally connected to user-scene interaction. The immersive system interprets movement commands and updates its output accordingly. When operating on PC a...

    S. Livatino, A. Zocco, Y. Iqbal, P. Gainley, G. Morana, G. M. Farinella in Extended Reality (2022)

  2. No Access

    Chapter and Conference Paper

    Are We Ready for Take-Off ? Learning Cockpit Actions with VR Headsets

    Pilot training is crucial for learning and practicing operations and safety procedures. The sooner pilots become acquainted with flight deck instrumentation and actions, the faster, safer, and cost-effective t...

    S. Livatino, M. Mohamed, G. Morana, P. Gainley, Y. Iqbal, T. H. Nguyen in Extended Reality (2022)

  3. No Access

    Article

    Mechanisms of ablation-rate decrease in multiple-pulse laser ablation

    We present two sets of experimental results on the ablation-rate decrease with increase of the number of consecutive laser pulses hitting the same spot on the target surface. We have studied laser ablation of ...

    E.G. Gamaly, A.V. Rode, A. Perrone, A. Zocco in Applied Physics A (2001)

  4. No Access

    Article

    About the possible diminution of the sp3 C presence along with the increase of the nitrogen enclosure in the CNx thin films produced by reactive pulsed laser deposition

    We report herewith new experimental data concerning the synthesis of carbon-nitride thin films by reactive pulsed laser deposition (λ = 248nm, τFWHM ≤ 30 ns) from a graphite target in low pressure nitrogen (0.2, ...

    E. György, I. N. Mihailescu, M. Baleva, E. P. Trifonova in Journal of Materials Science (2001)

  5. No Access

    Article

    Cubic boron nitride deposition on silicon substrates at room temperature by KrF excimer laser ablation of h-BN

    A hexagonal-BN target was ablated by high-fluence (6 and 12 J/cm2) KrF excimer laser pulses in low-pressure (5 Pa) N2 atmosphere, without any aid of ion bombardment and heating of the Si substrate. Investigations...

    S. Acquaviva, G. Leggieri, A. Luches, A. Perrone, A. Zocco, N. Laidani in Applied Physics A (2000)

  6. No Access

    Article

    Influence of the substrate temperature on BCN films deposited by sequential pulsed laser deposition

    The influence of substrate temperature on the composition and crystallinity of boron carbonitride (BCN) thin films deposited on (100) Si substrates by sequential pulsed laser deposition (PLD) has been investi...

    V.S. Teodorescu, A. Luches, R. Dinu, A. Zocco, M.F. Ciobanu in Applied Physics A (1999)

  7. No Access

    Article

    Deposition of NbC thin films by pulsed laser ablation

    Niobium carbide thin films were prepared by pulsed laser ablation of a stoichiometric NbC target. XeCl (308 nm, 30 ns) and Nd:YAG (266 nm, 5 ns) lasers operating at a repetition rate of 10 Hz were used. Films...

    S. Duhalde, R. Colaco, F. Audebert, A. Perrone, A. Zocco in Applied Physics A (1999)

  8. No Access

    Article

    Ferromagnetic liquid droplets

    Experimental evidence for ferromagnetic behavior of liquid droplets produced by laser ablation from amorphous alloys is presented for the first time. Thin films of amorphous magnetic materials are fabricated b...

    A. N. Grigorenko, P. I. Nikitin, V. I. Konov in Journal of Experimental and Theoretical Ph… (1998)