Skip to main content

48 Result(s)

within A. N. Gaodu Remove this filter

previous disabled Page of 3
and

  1. No Access

    Article

    Kinetics of the solid-phase reactions occurring during the production of clinker of a high-alumina cement by sintering

    N. V. Pitak, L. G. Litvin, Ya. Z. Shapiro, A. N. Gaodu, A. P. Nikonova in Refractories (1988)

  2. No Access

    Article

    Optimizing the properties of corundum-based thermal insulation products using the method of experimental planning

    In order to optimize the properties of the corundum-based thermal insulation products, a study was conducted on the effect of granulometry and the type of the filler using the method of experimental planning.

    T. M. Sandutsa, N. M. Kvasman, N. V. Pisareva, A. N. Gaodu… in Refractories (1987)

  3. No Access

    Article

    Structure formation of water suspensions of alumina containing polystyrene additions

    A study was made of the effect of the diameter of polystyrene balls, and the pH of the suspension, with sulfite lye additions, on the rheological and structural-mechanical properties of the alumina suspensions...

    T. M. Sandutsa, N. V. Pisareva, A. N. Gaodu, É. V. Degtyareva in Refractories (1987)

  4. No Access

    Article

    Experience with producing high-alumina cement by calcination in a shaft furnace

    A. P. Bakalkin, N. V. Pitak, Ya. Z. Shapiro, L. G. Litvin, A. N. Gaodu… in Refractories (1986)

  5. No Access

    Article

    Obtaining high-alumina cement at the semiluksk refractories factory

    We demonstrate that it is, in principle, possible to obtain refractory high-alumina cement on industrial equipment at the Semiluksk refractories factory. Technological parameters were developed for preparing r...

    A. P. Bakalkin, Ya. Z. Shapiro, M. N. Sorin, L. G. Litvin, T. P. Kupalova… in Refractories (1986)

  6. No Access

    Article

    The manufacture of lightweight, heat-insulating refractory goods with an operating temperature up to 1750°C

    The possibility is shown of obtaining lightweight refractories with an operational temperature of 1750°C and having a wide range of properties. The use of these refractories depends on the particular requireme...

    Ya. Z. Shapiro, O. V. Zhuchenko, A. N. Gaodu in Refractories (1986)

  7. No Access

    Article

    Vibratory densification of thermal insulation corundum products

    During vibratory densification, the bulk density and the angle of repose of the corundum bodies based on hollow granules and a porous filler depend on the type of the filler used and the size of its grains. Th...

    N. V. Pisareva, T. M. Sandutsa, A. N. Gaodu, É. V. Degtyareva in Refractories (1986)

  8. No Access

    Article

    A high-alumina cement with a low impurity content

    The possibility is shown of production of high-alumina cement with high-strength properties and a low impurity content from clinker produced by different methods.

    A. P. Bakalkin, Ya. Z. Shapiro, L. G. Litvin, A. N. Gaodu, V. S. Prasko… in Refractories (1986)

  9. No Access

    Article

    Thermal-insulation glass-fiber refractory materials and parts (review)

    A. P. Bakalkin, V. V. Martynenko, A. N. Gaodu, É. V. Degtyareva in Refractories (1984)

  10. No Access

    Article

    Obtaining polycrystalline alumina fibers

    L. A. Dergaputskaya, I. N. Kalinovskaya, A. N. Gaodu, S. V. Lysak in Refractories (1983)

  11. No Access

    Article

    Production of lightweight corundum refractories with a low apparent density by a semidry pressing method

    Laboratory developments and the production of experimental lots have shown the possibility of obtaining low-shrinkage lightweight corundum refractories with a low apparent density and thermal conductivity by a...

    Ya. Z. Shapiro, A. N. Gaodu, O. V. Zhuchenko, G. E. Karas', A. A. Mukhin… in Refractories (1983)

  12. No Access

    Article

    Obtaining polyceystalline alumina fibers (a review)

    L. A. Dergaputskaya, I. N. Kalinovskaya, A. N. Gaodu in Refractories (1983)

  13. No Access

    Article

    Deformation properties of refractory glass-fiber goods based on mullite-silicate fiber

    Studies have been carried out on the deformation characteristics under uniaxial extension and compression of specimens of thermal-insulation refractory glass-fiber tiles type MKRP-340 based on mullite silica f...

    E. Z. Korol', V. M. Panferov, V. V. Martynenko, E. P. Saenko, A. N. Gaodu… in Refractories (1982)

  14. No Access

    Article

    Effect of the type of binding material on the properties of refractory glass-fiber heat-insulation products

    The effect of binders (water glass, silica sol, chromium-aluminophosphate binder, bentonite, and polyvinyl-acetate dispersion) on the basic properties of thermal-insulation glass-fiber refractory articles has ...

    V. V. Martynenko, A. N. Gaodu, Z. D. Zhukova, E. I. Zoz, É. V. Degtyareva in Refractories (1982)

  15. No Access

    Article

    Chamotte-kaolin insulating bricks with an apparent density of 0.8–0.9 g/c m3

    Using sandy kaolin raw materials at the Velikoanadaol'sk refractories combine we made lightweight insulants with an apparent density of 0.8 and 0.9 g/cm3, using coke fractions <3 and 5 mm, respectively. In both c...

    N. V. Pisareva, A. N. Gaodu, V. P. Rakina, S. I. Kulaenko… in Refractories (1982)

  16. No Access

    Article

    Chamotte lightweight refractories made by casting

    The authors have developed a procedure for making chamotte lightweight artifacts with an apparent density of 0.3–0.7 g/cm3 by casting. Lightweight artifacts with the required structure and physicomechanical prope...

    N. V. Pisareva, A. N. Gaodu, S. I. Kulaenko in Refractories (1980)

  17. No Access

    Article

    Production of refractory paper

    The process for the production of refractory paper based on high-alumina fibrous material and synthetic bonding (vinol fiber) has been developed and tested under industrial conditions. The refractory paper can...

    M. N. Sorin, A. N. Gaodu, N. V. Pitak, A. S. Yutina, T. V. Samarina… in Refractories (1980)

  18. No Access

    Article

    Anorthite lightweight refractories for service in carbon-containing media

    The authors have developed a procedure for making anorthite lightweight artifacts with an apparent density of 0.5 g/cm3 and a low iron oxide content, permitting their service in carbon-containing reducing media u...

    L. A. Dergaputskaya, A. N. Gaodu, L. G. Litvin in Refractories (1980)

  19. No Access

    Article

    Producing corundum insulating products by dry pressing

    Laboratory developments and the production of trial batches of articles show that it is possible to make low-shrinkage corundum insulating bricks by dry pressing with stated properties and high performance fac...

    G. E. Karas', A. A. Mukhin, V. I. Éntin, A. I. Savkevich, Ya. Z. Shapiro… in Refractories (1980)

  20. No Access

    Article

    A review of the state standard for lightweight refractory products

    A. P. Bakalkin, Ya. Z. Shapiro, V. P. Rakina, A. N. Gaodu in Refractories (1979)

previous disabled Page of 3