Skip to main content

previous disabled Page of 3
and
  1. No Access

    Article

    Experience with producing high-alumina cement by calcination in a shaft furnace

    A. P. Bakalkin, N. V. Pitak, Ya. Z. Shapiro, L. G. Litvin, A. N. Gaodu in Refractories (1986)

  2. No Access

    Article

    Obtaining high-alumina cement at the semiluksk refractories factory

    We demonstrate that it is, in principle, possible to obtain refractory high-alumina cement on industrial equipment at the Semiluksk refractories factory. Technological parameters were developed for preparing r...

    A. P. Bakalkin, Ya. Z. Shapiro, M. N. Sorin, L. G. Litvin, T. P. Kupalova in Refractories (1986)

  3. No Access

    Article

    Mullite corundum refractories for the roofs of electric-arc steel-melting furnaces

    V. A. Ustichenko, G. I. Krut'ko, A. A. Mukhin, G. E. Karas', Z. M. Elisova in Refractories (1986)

  4. No Access

    Article

    Use of high-alumina refractories in gate valves in teeming of alloy steel

    Teeming of constructional and stainless steels with the use in the gate valves of mullite-corundum and mullite refractories, the production of which has been introduced in Semiluki Refractory Plant, has been i...

    L. I. Evich, G. E. Kalita, E. N. Yastremskaya, E. K. Sizova, A. A. Mukhin in Refractories (1984)

  5. No Access

    Article

    Production of lightweight corundum refractories with a low apparent density by a semidry pressing method

    Laboratory developments and the production of experimental lots have shown the possibility of obtaining low-shrinkage lightweight corundum refractories with a low apparent density and thermal conductivity by a...

    Ya. Z. Shapiro, A. N. Gaodu, O. V. Zhuchenko, G. E. Karas', A. A. Mukhin in Refractories (1983)

  6. No Access

    Article

    A high-alumina mass for gunniting the lining of steel-casting buckets

    The composition for a high-alumina gunniting mass with an Al2O3 concentration of ≥65% was developed on the basis of chamotte obtained by firing the natural raw material. The production of the high-alumina gunniti...

    L. A. Babkina, Yu. A. Pirogov, M. E. Drizheruk, A. A. Mukhin, G. E. Karas' in Refractories (1982)

  7. No Access

    Article

    Using mullite-corundum refractories in equipment for refining and vacuum treatment of steel

    E. S. Borisovskii, A. N. Sokolov, E. A. Simun, V. I. Ignat'ev in Refractories (1981)

  8. No Access

    Article

    Development and introduction of a production method for mullite corundum MKTsP-82 tiles

    G. E. Karas', A. A. Mukhin, M. S. Chirkova, A. E. Zhukovskaya in Refractories (1981)

  9. No Access

    Article

    Rammed lining for the walls of steel ladles used in steel melting employing synthetic slag

    Yu. A. Pirogov, L. A. Babkina, N. V. Gul'ko, A. A. Mukhin, G. E. Karas' in Refractories (1981)

  10. No Access

    Article

    Refractory tubes for protection of metal jets issuing from a steel-pouring ladle during continuous casting

    At the continuous-casting line at NLMW we have tested pouring with a protected stream of metal from the steel-pouring ladle with the aid of quartz and graphite-chamotte tubes. It was established that the optim...

    G. É. Solovushkova, I. Ya. Dol'nikov, A. S. Krasnyanskii, G. E. Karas' in Refractories (1980)

  11. No Access

    Article

    Producing corundum insulating products by dry pressing

    Laboratory developments and the production of trial batches of articles show that it is possible to make low-shrinkage corundum insulating bricks by dry pressing with stated properties and high performance fac...

    G. E. Karas', A. A. Mukhin, V. I. Éntin, A. I. Savkevich, Ya. Z. Shapiro in Refractories (1980)

  12. No Access

    Article

    Making gate valve refractories for steel ladles using GK alumina

    A technology was developed for making articles for the gate valves of steel casting ladles ensuring high service factors. It was found possible to use high-alumina chamotte instead of corundum.

    N. V. Konetskii, A. A. Mukhin, R. N. Gol'dinova in Refractories (1980)

  13. No Access

    Article

    Manufacture of corundum plates for sliding gates

    A. A. Mukhin, G. E. Karas', V. I. Éntin, M. S. Chirkova, A. A. Kortel' in Refractories (1979)

  14. No Access

    Article

    Experience with making high-alumina cement at the Semiluksk Refractories Factory

    It was shown to be possible to make low-iron high-alumina cement based on the waste products from the production of corundum insulating bricks or finely milled alumina.

    G. E. Karas', N. V. Konetskii, A. A. Mukhin, Ya. Z. Shapiro, A. S. Yutina in Refractories (1979)

  15. No Access

    Article

    Causes of failure of refractories in a tunnel kiln used to fire corundum insulating products

    A. S. Yutina, N. V. Pitak, Z. D. Zhukova, A. A. Mukhin, G. E. Karas' in Refractories (1979)

  16. No Access

    Article

    Automatic setting device for refractories

    A. A. Mukhin, A. A. Malyugin, V. A. Zhitenev in Refractories (1979)

  17. No Access

    Article

    Producing shrink-free high-alumina compounds

    N. V. Konetskii, A. A. Mukhin, A. I. Savkevich, R. N. Gol'dinova in Refractories (1979)

  18. No Access

    Article

    Production technology of silicon carbide saggers

    A. D. Pivovarov, V. M. Yam, G. E. Karas', A. A. Mukhin, E. D. Galushkina in Refractories (1978)

  19. No Access

    Article

    The durability of acoustically tested SP-11-type mullite-corundum stoppers

    An investigation carried out at the Novolipetsk Metallurgical Plant of the performance of the SP-11-type mullite-corundum stoppers produced by the Semiluk Refractories Plant showed that the durability was high...

    V. N. Boricheva, N. K. Senyavin, M. L. Pevzner, A. A. Mukhin, G. E. Karas' in Refractories (1977)

  20. No Access

    Article

    Using chrome-containing tailings in the production of high-alumina brick and compositions

    É. V. Degtyareva, I. I. Kabakova, N. V. Konetskii, A. A. Mukhin in Refractories (1976)

previous disabled Page of 3