Search
Search Results
-
Comprehensive Assessment of STGSA Generated Skeletal Mechanism for the Application in Flame-Wall Interaction and Flame-Flow Interaction
In this study, we conduct a thorough evaluation of the STGSA-generated skeletal mechanism for C 2 H 4 /air. Two STGSA-reduced mechanisms are taken into...
-
Exploring Multicomponent Phase Space to Discover New Materials
Multicomponent phase space has been shown to consist of an enormous number of materials with different compositions, the vast majority of which have...
-
Using Longitudinal Fins to Improve the Melting Performance of Stearic Acid in Thermal Energy Storage Devices
The heat transfer efficiency of a thermal energy storage unit (TESU) can be improved by the addition of novel longitudinal fins. A series of TESUs...
-
Effects of Heat Transfer on Laminar-to-Turbulent Transition over a Compressor Blade Operating at Low Reynolds Number
To control the transition process in a laminar separation bubble (LSB) over an ultra-high load compressor blade at a Re of 1.5×10 5 , the effects of...
-
Power Generation Enhancement in a Solar Energy and Biomass-Based Distributed Energy System using H2O/CO2 Hybrid Gasification
A new solar energy and biomass-based distributed energy system using H 2 O/CO 2 hybrid gasification is proposed, and their complementarity to enhance...
-
Comparison of extended irreversible thermodynamics and nonequilibrium statistical operator method with thermodynamics based on a distribution containing the first-passage time
An analogy is drawn between version of non-equilibrium thermodynamics a distribution-based containing an additional thermodynamic first-passage time...
-
Modeling of Rectangular Microchannel Heat Sink with Non-Uniform Channels and Multi-Objective Optimization
Rectangular microchannel heat sinks (MCHS) are widely used to cool high-heat-flux electronic devices. However, previous studies focused mainly on...
-
Clogging reduction by addition of small particles of various material densities
We present an experimental investigation on the flow and clogging of bi-disperse mixtures of coarse and fine grains of different densities passing...
-
Prediction of hydrodynamic characteristics of a 3D liquid-solid tapered fluidized bed using kinetic theory of rough spheres
The fluidized bed bioreactor is an economical and efficient method for wastewater treatment. In the fluidized bed bioreactor, fluidized particles...
-
Effect of Preload Force on Heat Generation of Li(Ni0.8Co0.1Mn0.1)O2/SiOx-C System Batteries: The Discharge Process
Lithium-ion batteries (LIBs) undergo various degradation phenomena such as material decomposition, structural change and uneven lithium ion...
-
Performance Study of a Novel Ejector-Cascade Refrigeration System with Regenerator
In this paper, a novel NH 3 /CO 2 ejector-cascade refrigeration system with regenerator is proposed, which can recycle the waste heat at the outlet of...
-
Effect of Oxygen-Rich Combustion on Flame Propagation of Syngas in a Half-Open Pipe at Elevated Temperatures
The investigation of syngas flame propagation has great benefits for the effective use of gas turbines. This essay sets out to study the flame...
-
Phase Equilibria of the Er-Al-Zr Ternary System at 500 °C
The phase equilibria of the Er-Al-Zr ternary system at 500 °C were investigated using a combination of electron probe microanalyzer and x-ray...
-
Flame Morphology and Characteristic of Co-Firing Ammonia with Pulverized Coal on a Flat Flame Burner
Ammonia as a new green carbon free fuel co-combustion with coal can effectively reduce CO 2 emission, but the research of flame morphology and...
-
The 500 °C Isothermal Section of the Al-Fe-Pr Ternary System
Phases and equilibria involved in the isothermal section at 500 °C of the ternary Al-Fe-Pr system have been here investigated in the whole...
-
Hybrid LES/RANS Simulations of Compressible Flow in a Linear Cascade of Flat Blade Profiles
The paper reports on 3D numerical simulations of unsteady compressible airflow in a blade cascade consisting of flat profiles using a hybrid LES/RANS...
-
Technological support for the durability of metal-cutting tools by the formation of wear-resistant coatings using energy-efficient methods
The purpose of this study was to evaluate the possibility of using mechanical spectroscopy to determine the strength of tool coatings from their...
-
Configurational mechanics in granular media
Granular materials belong to the class of complex materials within which rich properties can emerge on large scales despite a simple physics...
-
A Comprehensive Study of a Low-Grade Heat-Driven Cooling and Power System Based on Heat Current Method
Combined cooling and power (CCP) system driven by low-grade heat is promising for improving energy efficiency. This work proposes a CCP system that...
-
Dynamics of sand response to rapid penetration by rigid projectiles
The response of dry sand to rapid penetration by a rigid projectile is investigated through a series of high-speed penetration experiments. A...
