1 Introduction

The outbreak of COVID-19 and its associated inhibition complications have triggered a global health disaster affecting every segment of individual life. In the preliminary stages of the illness, the numerous people infected were very small, and it did not reflect the threat of this powerful capability so that most cases would resolve impulsively. With a steady sequence of instances, the WHO has announced that COVID-19 has become a pandemic with a tremendously high menace perspective that may affect the lives of millions of people in every country, especially with a pathetic health organization. The disease is poisonous because of two reasons: first, a novel virus included no vaccine has been found; second, effortlessly spread throughout directly or indirectly proximity with sick people.

The COVID-19 [1] worldometer statistics show reasons for great concern, through approximately 83,915,772 people affected worldwide, and 1,827,949 patients lost in the fight and died on October 29, 2020. In addition to the alarming information, the USA is a solitary country that leads the standard carriers within health development, recording the uppermost quantity of COVID-19 sufferers pursued by India, Russia, South Africa, Brazil, and the record will go scheduled till 215 countries worldwide. In the USA, the total coronavirus cases are 102,169,665, along with 74,014,468 recovery cases and 2,203,677 total deaths since January 29, 2021. The numerous fresh cases stated daily rising rapidly, forcing administrations, and higher official authorities around the world to put in place a non-stop closure to ensure social segregation of the disease. The international reactions towards the disruptive distribution of COVID-19 have been speedily when most of the overstated countryside has blocked their corresponding borders without travel and transportation facilities.

The WHO and CDC (Center for Disease Control and Prevention) distributed some formal guiding procedures ensured by the people, governments, nationwide, and worldwide organizations to guarantee the completion to prevent the disease, thus chain contravention promotes this outbreak epidemic [2]. The worldwide contribution for outburst COVID-19 as developed through the WHO including five major concerns: (1) to promote every aspect of individual health to maintain cleanliness and public awareness with social distancing, (2) managing rare or irregular cases to avoid society spreading, (3) to suppress the public communication by implementing appropriate limits, (4) relevance to decrease the mortality factor, some of the health-care services applied, and (5) the invention of develo** of remedies and vaccines for major scale management. Figure 1 depicts the spreading of outbreak COVID-19.

Fig. 1
figure 1

Spreading of outbreak COVID-19

Full size image

The WHO and CDC panel has recognized with comprised symptoms showing a mild infection of COVID-19 as fever, dry cough, vomiting, diarrhea, and myalgia. The wide-ranging community has been knowledgeable that they will be quick to respond by seeking medical attention to reduce the incidence of illness. The government and official authorities have commenced investing more willingly in the COVID-19 research and its vaccine. In addition to this incentive program, there is a lot of research and development work directed at the COVID-19 epidemic.

The approaches, ML (Machine Learning) with DL play a significant part in diagnosing various diseases [3]. The method of image processing has increased considerable impetus in all areas of health care, particularly for the recognition of cancer in smart cities [4]. The current revision focuses on the DL and image processing contributions treated to battle the COVID-19 introducing an in-depth evaluation of the modern structure designed by using this technology.

1.1 State-of-the-Art and Participations

With the high effort headed for battling the coronavirus outbreak, scientific research has begun into every guideline, and DL combined among medical imaging practices has also been extensively tested to discover a specific resolution [5]. Many exploring studies have been available for related purposes, as described in Table 1. The exclusivity of the current project performs in its efforts to highlight the medical imaging and DL approaches intended for detection of COVID-19 as well as also gives importance towards the scope of the potential investigation, which still needs to be considered. The techniques extracted are based on various published articles by well-known publishers and therefore help to obtain critical recommendations from the research community and the management authorities against the disease.

Table 1 Modern DL implementation in pandemic COVID-19 image datasets
Full size table

The main problems in the COVID-19 study are the shortage of reliable and sufficient data. Because of the limit of tests performed, various death cases affected by the virus were left unreported. It’s even harder to tell if something that fails in identifying COVID-19 illness is four, four hundred, or extra more. Globally, no country has been able to provide consistent data on the availability of the ailments in a sample representing the inhabitants. However, R&D (Research and Development) work is unstoppable, so the integration of information plays a very imperative task. The scientific characterization of information integration depends on the quality of content, stated that “it is the main procedure of compiling and collating the information from several foundations that give meaningful information for the acquisition, detection, and localization of a particular object”. In the scheme of ML with deep network architecture, the accessibility of huge, premium datasets achieves a chief task in the efficiency of the consequences. Data integration assists in compiling the compound data sets, in addition, to apply them to the DL framework for accomplishing improved correctness in prediction.

For instance, CT scan (Computer Tomography) medical images taken from the affiliated hospitals, named as ** some ML learning models to provide an identical reason by using minimum resources which resulting in considerably equivalent 82–86% accuracy, 92–95% sensitivity like the typical RT-PCR test. Ozturk et al. [8] The radiological imaging can collaborate with the high use of ML and AI models with a more precise diagnosis of the COVID-19 at prior guaranteed accessibility of treatment. The DarkNet as the classifier is used for YOLO (You Only Look Once) real-time object recognition scheme. This model can be engaged via the cloud with assisting the radiologists in authenticate their early screening, identify and categorize COVID-19 cases as well as provide the principle for particular locality wherever there is a lack of expert radiologists owing to an irresistible number of infected individuals.

Fan et al. [11] A novel automated lung contamination COVID-19 segmentation approach from CT scans through a deep network called Inf-Net, by summing up the features from high–level layers with PPD (Parallel Partial Decoded), then produce a global map for further experiments. A semi-supervised approach can be used to improve the efficiency of the learning model with high correctness.

Hu et al. [17] presented a weakly supervised DL approach for identifying and classifying the COVID-19 illness in CT scan images with diminishing the manual tagging of the CT scan images. We considered an open public dataset, accessed from the TCIA (The Cancer Imaging Archive) for training a deep neural network for the identification of disease.

Khan et al. [18] suggested a novel, CoroNet: deep CNN representation which is used to identify coronavirus contamination from chest x-rays. This method established Xception prior-trained scheme on the dataset as ImageNet which gives 89.6% accuracy in a 4-class model and 95% accuracy in a 3-class model. Pereira et al. [19] focused on the classification approaches as multi-class classification and hierarchical classification with a re-sampling scheme for the sense of balance in the class distribution factor.

Narin et al. [20] proposed the detection of coronavirus outbreaks on CXR images with three-layered deep NN named ResNet50, Inception-V3, and InceptionResNetV2. In this scheme, we used a dataset from the GitHub open source Repository allocated by Dr. Joseph Cohen and the Kaggle repository as well. The end result attained using 5 fold cross-validation, ResNet50 = 98% accuracy, Inception-V3 = 97% accuracy and Inception-ResNetV2 = 87% accuracy.

Panwar et al. [21] performed a binary classification method to diagnose the COVID-19 samples. A novel modified VGG pre-trained model is used to categorize the input images. In this study, Grad-CAM (Gradient Weighted Class Activation Map**) technique is used for color visualization to assemble the proposed DL model more understandable.

Ni et al. [22] conducted a lesion segmentation, detection, and position DL technique. The proposed methodology was trained in 14,435 individuals with lung CT scans for diagnosis of COVID-19 infection. The study was performed on a non-overlapped dataset of 96 infected reports from three hospitals in China.

Arora et al. [23] performed pre-trained models i.e. MobileNet, XceptionNet, DenseNet, ResNet50, VGG, InceptionV3 on the benchmark CT scan dataset to diagnose the COVID-19. To achieve better results, a high-resolution pixel of CT scans used with a dense network in the pre-processing stage has been executed.

Aslan et al. [24] studied two DL models to detect the positive cases of COVID-19 by using a lung CT scan and X-ray images. The CNN pre-trained architectures such as AlexNet and BiLSTM (Bi-directional Long Short-Term Memories) layer, which gives the best results in disease identification.

Jangam et al. [25] proposed new heterogeneous stacked ensemble models such as VGG, ResNet101, DenseNet169, and Wide ResNet50-2. From every CNN pre-trained model, the additional elements of base classifiers were obtained by changing the fully connected layers. The proposed model achieved good results on five various datasets, comprising of lung CT scans and X-ray images. The selected images are used to train and validate the proposed model which yields a high recall and accuracy.

Kumar et al. [26] presented an ensemble model consisting of GoogleNet, EfficientNet, and XceptionNet used to classify the patients into COVID-19, pneumonia, tuberculosis, or healthy. This model is used to detect the infected cases at a very early stage on the chest X-ray images. The proposed methodology improves the generalization of the classifier for both the binary and multiclass datasets. Two standard datasets are used to calculate the statistical performance of the proposed model.

Liu et al. [27] conducted a two-way transfer learning method for the correct segmentation of COVID-19 in lung CT scan images. Two major inventions in this study, consist of efficient virus segmentation DL model, known as nCOVSegNet, and a new two-way CNN transfer learning approach. The proposed work directs towards resolving the low edge contrast and huge feature combinations by using the effective segmentation method. The two-way transfer learning approach is used to make the facts and train on the CT scan images with COVID-10 illness.

Oluwasanmi et al. [28] presented the transfer learning approach with determining the problem of an insufficient dataset and the significance of semi-supervised GAN (Generative Adversarial Network) for features extraction with the production of images. The advantage of the proposed methodology is the loss ratio between the real sample and the produced data sample.

Perumal et al. [29] proposed the CNN transfer learning technique with the Haralick feature extraction approach which concentrates on the region of interest to diagnose the COVID-19. The main aim of the proposed work is to detect the COVID-19 infection at the very earliest stage to control the transmission of disease. This study makes the fast prediction task and helps several medical radiologists.

Prakash et al. [30] conducted a variant SqueezeNet pre-trained model with segmentation technique to improve the diagnostic behavior of the CT scans and X-ray images. The proposed method is used to train and validate with the feature extraction from the medical image dataset for binary and multi-classification.

Essentially, the main target to understand the COVID-19 is at the max out where presented medical amenities are plagued. Emergency branches, outpatient wards have been extended away from their normal ability to serve growing patients. In this situation, healthcare contributors require to build resolutions with little information.

The physical composition of COVID-19 begins with mild or no indications, but it quickly transforms its track to make patients more sensitive to the deadly effects of multiple organ failure. The overall aim is to diminish the sudden decline, early diagnose of the illness using restricted databases. There are custom-made laboratory tests such as, RT-PCR (Real-time Polymerase Chain Reaction Test) which is tested through nose and throat-swab with narrow sensitivity. With the huge amount of patients, RT-PCR re-agents get limited as well as specific laboratory equipment for conducting illness testing is unavoidable. Various AI with ML is an effective technique that allows for faster-improved decision-making outcomes.

This paper provides complete details of the different uses of DL techniques in the COVID-19 pandemic employing instantaneous and public available databases. The exclusive offering to our study are listed below:

  1. 1.

    The study defines some essential contributions on outbreak COVID-19 and its prevalence, establishing the motive and the requirement for rapid spreading disease forecasting which assists to confirm the presence of the illness in smart cities.

  2. 2.

    The main responsibility of DL purpose in medical imaging is detailed converse to sustain its potential in the calculation of the impact of COVID-19.

  3. 3.

    The current research on DL performance and employing image processing in COVID-19 are elaborated.

  4. 4.

    The use of datasets, methods, testing metrics, research confronts, and some lessons examined incorporated with modern research activities as well as future indicators of epidemic control in various smart cities.

1.2 Article Organization

The work is arranged systematically as discussed further. Section 2 represents the basic details of COVID-19, DL with articulates the wide-ranging motivation for embracing development and scrutinizing the medical images from the available surveys. In Sects. 3 and 4, the general idea of DL’s applications in medical imaging and it's related summary is discussed. A review focusing on the potential use of DL functioning in favor of medical imaging practices in COVID-19 is presented in Sect. 5. Section 6 recapitulates the above review which emphasizes lessons and includes suggestions that guide the potential outlook for future research. This paper is accomplished with the conclusion in Sect. 7.

2 Background and Motivation

This section represents the basics of outburst COVID-19, DL approaches and dealing with the analysis of medical imaging from the existing survey.

2.1 Outline and Condition of COVID-19 Occurrence

Initially, most cases of pneumonia were registered in Wuhan city of the PRC (People's Republic of China) in late 2019 [31]. COVID-19 as a transmitted virus commenced by (SARS CoV-2) severe acute respiratory coronavirus-2, called under the class of beta-CoV (Beta-coronavirus). Explorations have revealed that the foundation of illness may have originated from the Huanan seafood market in Wuhan city, and finally, the PRC government officially announced 27 more cases in December 2019. According to various studies, researchers found that the virus was passed on from wild bats [32].

According to the response of WHO, an R&D Plan has been developed to speed up the diagnosis, treatment of this illness. The main proposal aims towards improvement in collaboration between researchers as well as worldwide health experts, to increase the R&D development process and build new parameters to gain the knowledge for improving standards in universal response. [33] On January 30, 2020, after the various suggestions of the Emergency Committee, the General Director WHO, has announced that the outbreak comprised a PHEIC (Public Health Emergency of International Concern).

International scientists met at WHO headquarters in Geneva on 11–12 February 2020 to evaluate the existing knowledge about the novel virus, to get agreement on some significant research queries that require to be responded quickly, and discover paths to work jointly to speed up and support research for limit this outbreak criteria.

Shereen et al. [34] assert that the limits of the spreading of the COVID-19 or growth of the viral infection rely on natural conditions, respiratory water droplets, hygiene, and proximal space. The researchers, Kampf et al. [35] have found that the distribution of COVID-19 is nominal in high temperature and moist regions. They also emphasize employing a steam treatment to reduce the risk of the pandemic. The inhaled steam passes through the respiratory glands towards the alveoli as well as performing for improvement in the level of oxygen.

The WHO situation report, arrived with a valuable plan on February 3, 2020, to fight COVID-19 [2], which supplies some procedures and rules for higher official authorities, doctors, etc. ensuring to fight with the pandemic as well as personal safety for frontier ones. An additional significant plan was provided by the WHO to perform lockdown worldwide, which could be effective to avoid infection. The principle reports generalized [36] by WHO on March 19, 2020, addresses the information of avoiding the infection, totally based on positive samples by severe acute respiratory syndrome infection (SARS).

The situation report also focused on the particular precautionary measures as the use of a mask by the community on COVID-19 exaggerated regions, hand washing with alcohol-based sanitizers and health workers instruct not to touch patients with uncovered hands. According to the WHO, there is no definite medicine for the illness extremely. The UNCTAD (United Nations Conference on Trade and Development) has compiled a list of best observations, strategies [37] that countries can use to implement Key provisions that can assist economic growth during the pandemic.

2.2 Preliminaries of Deep Learning

DL and (NN) Neural networks expand considerable impetus in modern scientific research by building the potential to gain learning from the context [38]. These methods have been extremely employed in different applications like object identification, image recognition, prediction, classification, smart vehicles, etc. owing to their ability to a wide variety of data in the different areas. Different techniques worked with the DL approach as shown in Fig. 2. The DL methods are used to imitate the human brain functionality in the preprocessed form of information with more precise results. The deep network has trained like a human mind works accordingly by employing different layers to help predict and classify the data.

Fig. 2
figure 2

Deep Learning applications and techniques

Full size image

The model learning with supervision, as trained in pairs of identified inputs/outputs. The already identified value creates a vector of input and output called supervised learning. The supervised classification techniques [39] were performed to predict the clinical decline factor, death rates in ICU, generalized the clinical predictions for complex sepsis prognosis.

The unsupervised learning model works with the relationship between classifying the data elements without getting the label information. Object detection, neural network, clustering approach, etc. techniques followed by different algorithms. The unsupervised deep network framework used for medical image classification [40]

Learning with a semi-supervised approach, consider an intermediate technique towards ML models. Labeled as well as non-labeled values for training statistics employ in the semi-supervised learning method. When non-labeled data value is combined with some labeled value, so we can get better accuracy with improvement. The deep network framework augmented by [41] where performs label learning for non-labeled data, classifying the brain tumor cells with improved accuracy.

Different DL practices use ANN (Artificial neural network) to extract the features accordingly. The approach of feed-forward by Xu et al. [42] is used to provide knowledge in which every level refreshed its input value to get results in the summarized form. Enhanced ANN technique deals with evolutionary models that can provide better results comparing with traditional methods.

RNN (Recurrent Neural Network) mechanisms are similar to convolution neural networks, except that RNN is employed for language estimate computations. RNN follows the feedback approach where the output of a single layer is fed the same as the subsequent layer input. Both CNN and RNN as hybrid optimized architecture as FC-CSO algorithm with AND operation which enhanced the hidden layers used to detect mammogram breast cancer accurately by Patil and Biradar [43]

GAN employs the technique of discriminator and network system of generator. When the discriminator separates the false and factual information, then the generator system generates false information. To improve the training process, the deep network techniques were performed accordingly. As a result, GANs are extensively used in image processing techniques [44] as in the invention of images from text data. The network was introduced by Google, as an inauguration block for computing convolution as well as pooling tasks that concurrently process complex operations efficiently. Superior stage of DL used for automated computation in image processing [45]. For example, A novel method based on an in-depth synthetic image processing study where semantic extraction of the colony of bacteria’s on agar plate images to amplify the training data set size [46].

DL plays a vital role in the implementation of some algorithms on a large dataset. DL has huge potential to cope up with large data samples that will be created in smart cities owing to digital integration [47]. DL strategic testing depends on two main parameters: Firstly, the large size of the dataset to be in practice, and secondly, the maximum computation superiority. DL also facilitates the rapid investigation of multifaceted medical images [44]. DL approach is broadly used for the sustainable expansion of smart cities through the use of mass surveillance [48]. The subsequent section supplies an outline of DL’s techniques for medical imaging.

3 Indication of DL Application in Medical Image Processing

Different medical data sources with MRI (Magnetic Resonance Imaging), X-ray, CT Scan (Computerized Tomography), PET (Positron Emission Tomography) images, have offered doctors a huge amount of information [49]. The efficiency of ML algorithms focused on different aspects of feature extraction and data illustration. ML techniques are challenged by two factors, firstly, to get high accuracy with large dimensional image data samples and secondly, to train the model to get the most suitable results [50].

DL algorithms have been widely used for ensuring the uppermost level of correctness in form of illness detection and forecasting. The use of the DL procedure has brought about new developments in healthcare, as exposed in Fig. 3.

Fig. 3
figure 3

Various Deep learning applications in Medical Image Processing

Full size image

Litjens et al. [51] evaluated different DL approaches in medical imaging procedures with included several applications as Image Segmentation, Image Classification, Entity Identification, etc. In the discipline of medical imaging, the DL is used in several departments as Heart disease diagnosis, detection of cancerous cells, neurology, ophthalmology, psychotherapy. The creators are also entitled to some unsettled DL research challenges associated with image investigation. In the recent circumstances of affected people and another medical collaborator who preserve the electronic documentations, AI approaches that help in reducing the processing of medical images.

Ker et al. [52] evaluated the different AI strategies that can be used in medical imaging analysis. They have found from different surveys that CNN is extensively used in image analysis with large data sample processing techniques. The researchers also emphasized the major challenges of the non-availability of high-definition data samples with a labeling approach for improved understanding.

In the recent research, deep CNN with stochastic pooling instead of max-pooling or average pooling, more efficient for the identification of COVID-19 in the chest CT scans due to examine the features from the data samples throughout the training scheme and not required too much time for feature production [53].

3.1 Image registration

Image registration is a way of translating the data sets into a solitary coordinate replica. Registration performs a significant task in the field of biomedical image processing. It is widely used for data analysis or data joining together from various medical foundations. Normally, a medicinal professional should show various images in a variety of ways to minimize the illustration contrast in between the images [54].

The medicinal professional is frequently predicted to physically categorize the point in the images with important signal variability as being part of a large framework scheme. Biomedical image registration accumulates time-consuming tasks for physicists and doctors. To concentrate on the problem of the labor-intensive image registration system, the use of DL in this process has enhanced the efficiency of the dedicated image registration procedures [55].

Above 50% of cancer-affected individuals receive radiation rehabilitation, producing it as an individual most ordinary cancer healing scheme [56]. While the integral numerous affected patients increases, a large number of doctors will help out with medical imaging techniques. The open fully mechanical 3D registration software as ‘Elastix’, which improves the radiotherapy progression in radiation-oncology branches globally. The planned representation offers a computerized search, which works well internationally. Formerly, it was so hard to find three-dimensional image registrations that can provide accommodations with several changes towards the position, translation, and dynamic intensity variation efficiently. The main purpose of the proposed scheme is to save time prominently for physicians and provides high-quality clinical enrollment results. Improved ability to integrate diagnostic scanners which ensures the affected patients collect fewer repetitive scans and reduces the radiation exposure. The investigational result of the Haukeland Medical Center cancer database found a 97% success rate of prostrate, 93% of seminal vesicles, as well as 87% of lymph joints.

Chee and Wu [57] employed a self-supervised learning approach with a neural network to set up three-dimensional registration schemes. The main purpose of this mechanism is to facilitate image registration in a short period of an instance to identify the interior regions of the brain by capturing the data from various statistic categories. The tentative outcomes performed based on the orthogonal view of the brain scanning were found as 100 × more rapidly running time.

3.2 Segmentation

In medical image practices, Image segmentation performs an important task in the diagnosis of illness. Image segmentation splits the required image into various segments which aims to examine the digital images faster and simpler.

The novelists Oktay et al. [58] proposed a new method to conquer the disputes using a standard training approach that incorporates previous knowledge into CNN with a well-defined trained standard model. The recognition of biomarkers into medical images assists in the diagnosis progression. The supervised DL method is widely utilized for imaging practices but cannot be accurate because it requires in-depth knowledge of organs through their positional characteristics. The biomarkers detection procedure can be obtained by distinguishing unfavorable areas. This kind of incongruity can provide unseen information regarding structural formation.

Biomedical image segmentation is a compilation of some dedicated medical fragments that cover the entire medical digital depiction [59]. Recently, most interdisciplinary methods are being employed to process the medical data to obtain better diagnostic accuracy.

Guo et al. [60] proposed a monitored approach as a supervised ANN technique through the integration of cross-modality features where used at all levels of the ANN model. Besides, the authors also discussed a method of image segmentation by using CNN to describe the soft tissue lesions in images attained by different disciplinary procedures such as CT scans, X-rays, PET, MRI images. Appropriate mining with feature exploration of the tissue is necessary before image practices. It preserves to be helpful in situations wherever the medical images are uncertain or else have errors throughout the organization breakdown. A major challenge to existing medical imaging techniques is the deficiency of synchronization between training objects and output dependence.

The authors, Seebock et al. [61] perform the concept to apply the Bayesian DL process assumes that pandemic uncertainties will be related to framework manipulation from the trained database. The researchers also use the Bayesian-U-Net to training based on the condition with weak anatomy labels provided using various ANN techniques. The MRI images of the prostate by using segmentation can reveal important details for detecting prostate cancer. However, there are many challenges towards MRI image segmentation as loss of boundary area between the prostate gland and other organs, multi-complicated areas, and differences in the prostate features.

3.3 Image Classification

The classification is recurrently called CAD (Computer-Aided Diagnosis) performs a significant part in medical imaging tasks. Throughout the classification procedure, one or more images are considered input data samples and produce one diagnostic sample as an output that classifies the image accordingly.

Rajpurkar et al. [62] presented a novel “CheXNET” DL model that includes 121 convolutional stages, 1,21,120 chest X-rays offered as input data for detection of 14 various types of lung diseases. By examining this test, the radiologists claimed that the CheXNet mechanism goes beyond the F1-metric efficiency range.

Mikolajczyk and Michal [63] presented a study that deals with the problem that arises in the field of ML, the shortage of adequate quantity of training data or irregular class equilibrium within the databases. To overcome this problem, data augmentation is used, where the task of image classification begins with standard image transforming techniques as crop**, rotating with an angle, zooming, histogram mechanisms, and concluding with GAN examples.

Shankar et al. [64] proposed a novel automated HPTI-v4 (Hyperparameter Tuning Inception-V4) scheme for the detection and classification the diabetic retinopathy from colored fundus images. At the initial stage of preprocessing, CLAHE was used to improve the contrast level of the fundus images, and then a histogram-based segmentation approach was performed for attaining segmented images. The HPTI-v4 representation is applied for extracting the features and performs classification using MLP (Multi-layered Perceptron) method. This proposed model will give better results with 99.49% accuracy, 98.83% sensitivity, and 99.68% specificity.

Raj et al. [65] presented an advanced classifier as optimal DL for diagnosis of lung cancer, brain imaging as well as Alzheimer's disease. The main purpose of this research is to find a model to select the appropriate aspect of medical image classification. The enhanced classifier as OCS (Opposition-based Crow Search) method is performed to select the features from dedicated images for further analysis. This proposed model will give the maximum efficiency with 95.22% accuracy, 86.45% sensitivity, and 100% specificity for the set of images used.

3.4 Image Localization

In the image classification process, the processed images are supplied to the CNN model, and then the medical image content is visible. After the image classification, image localization can be used for the detection of illness. It is mainly reliable for introducing the bounding box in the region of an output location, which is also termed as classification employing the Image localization approach. The image localization of any structural part is a necessary pre-processing part in the scientific identification that allows the radiologists to identify certain significant features. In recent years, various research works encompass conducted the mechanism by using DL models to focus on the localization of the illness.

Guo et al. [66] presented a model for obtaining T2 MR prostate images to locate it accordingly. There are several challenges to classify accurate prostate in images as differences in thickness and incompatible manifestation. The authors performed the SSAE (Stacked Sparse Auto-Encoder) for training the prostate cancer images and further instructed characteristics to reveal the prostate identity in the medical images. This work has been executed on a database including 66 prostate MR images with accurate findings that will provide better results as compared to existing methods.

Baumgartner et al. [67] produced a representation that assists in the localization of fetuses in the images. Throughout the procedure, CNN performed training to classify 12-scan test planes with the network framework intended to identify the fetal effectively. Tentative results accomplished with recall = 80%, accuracy = 81% and precision = 69%.

Shin et al. [68] proposed a framework for mass localization and classification in breast ultrasound images. The study found that training CNN-based detection with huge and weakly annotated databases performed a non-trivial dilemma, and then over-fitting that can be occurred in those training with little and strongly defined database. To overcome this confront related to over-fitting, we use a database with weak annotations and a small one strongly defined database in the form of a hybrid. The test outcomes signified that the projected model may perform effectual localization and divide the masses with a little annotation effort. The experimental results were trained with 10 robustly images with weakly annotated images were matched to trained results from 800 strongly defined images, with confidence level 95% in difference with time  − 3.00 to 5.00% in the principles of appropriate local measurement (CorLoc), a scale of images with ground-truth is higher than 0.5.

3.5 Detection

Xu et al. [5 and 6.

Fig. 5
figure 5

Example of Chest X-Ray Images a Normal Image b Bacterial Pneumonia Image c Viral Pneumonia Image d COVID-19 Infected Image [87]

Full size image
Fig. 6
figure 6

Example of CT Scan Images a Normal Image b COVID-19 patient’s Image [88]

Full size image

5.1 Outburst Prediction

The globe is facing an exceptional universal health disaster owing to the COVID-19 pandemic [89, 90] DL techniques with medical image practices, have been found extensively together and its related works [91, 92]. As it has already become a trending method surrounded by researchers in the field of healthcare departments, it is logically recommended as a suitable model for current outbursts. For example, data-focused studies as DL models, Computer vision, medical image processing has proven effective in enhancing their appropriate extremely favorable solutions [93].

DL makes COVID-19 predictions worldwide accordingly. The efficiency of COVID-19 may be depending on the numerous factors classified as (1) Confirmed; (2) Active; (3) Deceased; (4) Recovered; (5) Population; (6) All reported dates; (7) Locations; (8) Living Circumstances, etc. The DL approach also produces data-oriented features as well as supervises the high-quality data, while ML mechanisms focused on handmade materials and compare with fewer quality data samples [94].

The model study of this epidemic statistics has fascinated the establishments concerning the detection and prediction of COVID-19. This is moreover eminent truth that the nation’s governments with other authorities of different countries have always relied on several types of illness prediction schemes that conduct the accomplishment of inventive generated strategies and determining the effectiveness of previous decisions. In the recent time of the health crisis, the worldwide legal authorities are increasingly emphasizing the use of various speculative representations with COVID-19 statistics to construct the informed decisions. This will facilitate them towards the execution of suitable controlling measurements [95] and also improve outburst COVID-19 suppression, recognition, and forecasting agreements.

More global COVID-19 predicted calculations are accessible at [1, 96, 97]. As the survey includes numerous challenges to resolving the COVID-19 and its related issues, there is a great need to reinforce the skills required by traditional methods, especially to strengthen the resilience of predicted outcomes.

Digital technology had a high impact on resolving critical health care and the associated curative targets. Most of the innovative technologies use the big data-analytics model, 5G IoT (Internet of Things), AI (Artificial Intelligence) with ML models, blockchain technology [98]. It can be a well-ingrained fact that DL has firmly expanded considerably within the sector of ML through its use in every aspect of individual health [99]. For example, the study of [95] has been gathering coronavirus epidemic data in Italy. The work accomplishment in ML with other Soft computing methods forecasts the likelihood of an explosion that allows executives to better plan for controlling the disease and associated economic systems. In the DL approach, data size and its quality perform a significant part in producing very effective results. The COVID-19 began in Wuhan, China as well as the people who are prone to be affected by this epidemic, were acknowledged towards dedicated hospitals in Wuhan to perform illness control policy [100]. The details of the patient’s data with confirmed COVID-19 positive case were affectively collected and analyzed by the researchers to help in ML with DL research behaviors [101]. In different countries as China, South Korea, Iran, and Italy, the trending data is used to gather COVID-19 related information [102]. Another source of illness prediction data includes the curvature curves and appropriate capacities from affected people in Hubei in China, with a visible arc [103] in envisioning the locations for potential outbursts.

Liu et al. [104] used ML mechanisms to predicting the COVID-19 conditions in different areas of Chinese states by forming the clusters which permit the synchronous development of geospatial areas. The DL scheme in medical image practices assists in performing methods for epidemic modeling to translate the numerous COVID-19 positive compared with the number of recovery cases found globally. COVID-19 cases ranging from no symptoms to severe respiratory suffering and manifold respiratory damaged elements. The coronavirus positive individuals examined at Anhui Medical University Hospital, China that discloses the people having SARS-CoV-2 detected at starting through RT-PCR. The experimental results have examined the gene sequence structure that compared with epidemic positive SARS-CoV-2 reports. Wuhan central hospital analyzed several patients having frequent pathogen detection utilizing Chest CT scan images [105].

The chest CT scan of the lungs distinguished the presence of COVID-19 disease [106], moreover declared to detect the COVID-19 more rapidly than the traditional methods as RT-PCR. It gives importance to the study of COVID-19 in which same symptoms with additional categories of pneumonia, that is quite difficult to correct classification. To overcome this complexity, the main target study includes traditional DL methods, using key characteristics integrating with medical image processing applications for accurate identification of COVID-19 positive CT scans, and minimizing the calculating errors to recover the efficiency of estimation results.

The CNN model with entirely integrated, used for COVID-19 diagnosis is shown in Fig. 7. The preference is mainly due to the strongly active impact of the COVID-19 pandemic and the unpredictability in its proceedings nationwide.

Fig. 7
figure 7

Example of a fully connected CNN for detection of COVID-19 in CT scan medical images

Full size image

5.1.1 The Architecture of CNN Transfer Learning

A deep neural network is under the branch of ML, which is encouraged by brain formation. This technique is widely used in recent years persist to prove remarkable performance in the area of medical imaging domain. Using DL techniques, attempts are made to draw visualize meaningful results from the medical image data. CNN models have been applied effectively in various fields such as lesion segmentation, classification by medical imaging tasks such as CT Scans, MRI images, X-rays. As an outcome of data analysis, the detection of ailments such as brain tumors, breast cancer, diabetic retinopathy, and skin cancer is easily mentioned in [107,108,109,110,111].

A CNN is a category of deep networks which is widely used in image diagnosing problems [112]. When it comes to CNN performance, the computerized medical images as input and converted to the dedicated resized format. The training procedure, evaluate the consequences of distinctions on the label and predict new images with them. CNN has three layers with a convolutional layer, pooling layer, and fully connected layer to execute various functions efficiently. The feature selection procedure is performed on the convolutional and pooling layers. Conversely, the classification task is executed on the fully connected layer. A detailed explanation of the layers is mentioned below:

Convolutional Layer The convolutional layer is the root layer of deep network systems. It is highly reliable for uncovering the features of the data sample. In this layer, the input image is transferred to the filter. As an outcome, the values are generated in the form of a feature map. Different kernels are applied in this layer so that low and high-level features are extracted from the medical images [113]. A kernel is a matrix having 3 × 3 or 5 × 5 shape dimensions for conversion with an input matrix. The parameter called “Stride” is defined as the number of steps adjusted to switch over the input matrix. The result of a convolutional layer is given as:

$$x_{k}^{L} = f\left( {\mathop \sum \limits_{i = 1}^{n} m_{k}^{L - 1} *p_{i}^{L - 1} + q_{k}^{L} } \right)$$

where \(x_{k}^{L}\) is the kth feature map in the layer L, \(m_{k}^{L - 1}\) represents kth kernels in the layer of L − 1, \(p_{i}^{L - 1}\) determines the ith feature map in the layer of L − 1, \(q_{k}^{L}\) represents the bias of the kth feature map in the layer of L, n is the total number of features in layer L-1, and “*” represents the vector convolution method.

Pooling Layer The pooling layer is the second layer in the deep neural networks. This layer is often performed on the feature map which is designed to lessen the number of features and network constraints using parallel statistics. In this layer, the global average pooling and max-pooling are used. In the max-pooling, it chooses simply the maximum value through the matrix size defined in each of the feature maps. It will lead to a reduction in the release of output neurons. The global average layer is simply performed earlier than the fully connected layer, which reduced the data to a single scale [114].

Fully Connected Layer The last and most significant layer of CNN is the fully connected layer. It performs as a multi-layer perceptron in the deep neural network. The ReLU (Rectified Linear Unit) activation function is usually used by a fully connected layer. The Softmax function is applied for predicting the multiple cases from the medical images in its last layer. The statistical calculations of both activation functions are described below:

$${\text{ReLU}}\left( {\text{y}} \right) = { }\left\{ {\begin{array}{*{20}c} {0,\quad y < 0} \\ {y,\quad y \ge 0} \\ \end{array} } \right.$$
$${\text{Softmax }}\left( {{\text{y}}_{{\text{i}}} } \right) = { }\frac{{{\text{e}}^{{{\text{y}}^{{\text{i}}} }} }}{{\mathop \sum \nolimits_{{{\text{x}} = 1}}^{{\text{n}}} {\text{e}}_{{\text{x}}}^{{\text{y}}} }}$$

where yi and n present the input data and the number of classes defined respectively. The neurons in this layer have full connectivity with every activation function in the earlier layer.

CNN Pre-trained models In medical data analysis, there is a problem faced by investigators related to the restricted amount of available real datasets. DL models usually require a large number of data. Categorization of this data professionally is a very expensive and time-consuming process. The great advantage of the transfer learning approach is that it permits a few training datasets and needs low computation costs. The information obtained from the CNN pre-trained model is passed to the training phase on a large dataset.

In Fig. 8, there is an example of deep CNN based on pre-trained models such as ResNet50, ResNet101, ResNet152, InceptionV3, and Inception-ResNetV2 for the multi-classification of COVID-19 chest CT scan images. There are three binary classes such as Binary class 1 represents the classification between COVID-19 and normal images, Binary class 2 determines the classification between COVID-19 and viral pneumonia, and Binary class 3 indicates the distinction between COVID-19 and bacterial pneumonia. Moreover, transfer learning is obtained by utilizing ImageNet data to conquer the inadequate data and computational training time.

  1. 1.

    ResNet50

    The ResNet (Residual Neural Network) model is an enhanced form of the deep neural network. It includes some alternatives among the layers to solve the defined problem. As an outcome, it avoids distortions that take place as the network becomes deeper and more complicated. Moreover, the restricted blocks are extensively used to speed up the training in the ResNet model [115]. The ResNet50 is a pre-trained model with 50-layers on the ImageNet database. This database contains above 14 million images, where more than 20,000 classes are designed for image identification purposes [116].

  2. 2.

    ResNet101 and ResNet152

    The models, ResNet101 and ResNet152 contain 101 and 152 layers correspondingly because of stacked residual blocks. In this study, it is possible to load a variety of pre-trained networks from the ImageNet database trained in over a million images [116]. As the result, the dedicated network has performed feature extraction of various images. The model has an input image dimension of 224 × 224.

  3. 3.

    InceptionV3

    The InceptionV3 is a CNN pre-trained model from the Inception group. It is designed to make various enhancements such as categorize smoothening, factorized 7 × 7 convolutional, and employing the secondary classifier. It is used to circulate the class information all over the network with the help of batch normalization [117].

  4. 4.

    Inception-ResNetV2

Fig. 8
figure 8

Diagrammatic representation of CNN pre-trained models for diagnosis of COVID-19, normal, bacterial, and viral pneumonia

Full size image

The CNN model, Inception-ResNetv2 has trained over a million images from the ImageNet database. The model has 164 deep layers and can categorize the images into thousands of object classes such as COVID-19, bacterial pneumonia, viral pneumonia, or normal. As an outcome, the model has been trained to extract meaningful features from a large set of images. The network with an input size of 299 × 299, and the corresponding output is a set of approximated case probabilities [118].

Table 3 determines the summary of COVID-19 benchmark imaging datasets with their corresponding format. In the study, it accumulated a list of open-access datasets, which is widely used for predicting the multiclass entities as COVID-19, bacterial and viral pneumonia, and normal cases. The researchers utilizing and compiling the lung CT scan slices and chest X-ray images which are obtained from the various publicly accessible data repositories.

Table 3 An outline of COVID-19 open-access databases
Full size table

5.2 Coronavirus Transmitted Indication

In December 2019, while the community was meant to be waiting for the celebration of the new year 2020, a few pneumonia cases originated from the COVID-19 epidemic [129] were generated report in the Wuhan city, China. The researchers in [130] have mentioned that a huge scale of individuals is affected positively due to wet mammals in the city of Wuhan, measured in the form of zoonotic as a source of COVID-19. Ultimately, many cases widely spread throughout the city of China, and worldwide gave it a rank of an outbreak [131].

Lu et al. [132] projected two kinds of snake classes as probable basins of the coronavirus pandemic. Xu et al. [133] established the pangolins as a transitional center for the unexpected COVID-19. The study in [134] has shown that the investigation of the genomic sequence of COVID-19 was so comparable with bat-originated SARS (Severe acute respiratory syndromes). In the same way, Malik et al. [135] proposed various animals like bats, pangolins, civet cats, etc. considered to be a possible cause of the SARS-Cov-2 virus in humans.

There are various applications have been developed by focusing on the medical image processing, computer vision, ML, AI, which assists in monitoring, testing, detecting and controlling the main impact of pandemic worldwide. For example, Defensive types of equipment, ventilators, automated sanitization, ventilators, breathing apparatus used to treat affected people and protect healthcare experts ensure the presence of virus infection as well. Temperature testing is widely used to assess human temperature as high temperature recognizes the key symptom. The social isolation scheme is performed for perceiving the safest less proximity from the COVID-19 positive patients and visual-conducted robotics mechanisms have been followed in this concern. The government authorities in Australia have been commenced a ‘Dragonfly’ as a UAV (Unregulated Airline Vehicle), to quickly deploy drones for detecting the COVID-10 illness in distant locations accurately among citizens.

The partnership with the University of Waterloo as DarwinAI organization has launched Deep-CNN as “COVID-Net” for diagnosing the coronavirus [136] in chest radiographic images. Medical image practices with computer-vision methodologies are widely used in the mass invention of healthcare pieces of equipment being used safely by hospital faculties. The resources help to prevent the spread of the virus by reducing the human distance. It proved their specialty in detecting and diminishing the air-borne elements, which have great potential to infect a large number of people with the COVID-19 illness. The disease indication system which considers the data science tasks emphasize responding to various conditional questions or challenges associated with the pandemic [137]

The biggest dispute of the occurrence condition is modeling the approach where collecting of datasets, data analysis, and live dataset reporting accordingly. Department of Health-care, New Zealand generated a report [138] that planned a comprehensive data analysis that amplified the general population, time, and various epidemiological parameters. This study understands the collision and transmission factor of the COVID-19 pandemic depending on different parameters like age, region area, gender, past travel records, and daily live records from any such observational samples by using a deep network with ML mechanisms.

Pourghasemi et al., Saha et al. [139, 140] performed generate a CSSE Tool [141] named GIS (Geographic Information System) for locating the affected people with this illness. The novelists [142] have compiled a GIS tool system with ML and SVM (Support Virtual Machine) for measuring the risk factor of coronavirus in the states of Iran as Fars. In terms of information, the internet serves as a great source to achieve data samples on this COVID-19 illness. In addition to this pandemic related data, the number of COVID-19 positive cases, mortality rate, and the recovery rate are also offered to access in the dashboard of Johns Hopkins, University of Medicines [141]

Afterward, WHO also introduced the dashboard of COVID-19 [97], which works on Arc-GIS. The mobile application as Aarogya Setu [143] offers constructive detailed information regarding COVID-19 positive cases in the provincial areas of India. The medical image processing techniques with DL applications have also been used for the development and authenticate the model representation [144] at Renmin University of China. It is usually gathered 46,096 anonymous images of different 106 patients in hospitals. The admitted patients lied into two classes; firstly, COVID-19 positive patients and secondly, patients with some other common disease.

51 positive cases are diagnosed with coronavirus disease. The medical team examined and analyzed the 21 Chest CT scan images with COVID-19 positive performed at [144] Renmin University of China. The system emphasized on DL is developed to make certain conclusions for physicians to early diagnose the contaminated pneumonia COVID-19 cases to manageable controlling of the pandemic.

5.3 Detection and Therapeutic Aspects of COVID-19

The pandemic, COVID-19 is termed as a cluster of numerous viruses. When the patients have been infected with the defined ailments, then the symptoms may resemble acute respiratory disease or an infectious common cold. For example, MARS-CoV (Middle East Respiratory Syndrome), SARS-CoV (Severe Acute Respiratory Syndrome) is one of the most serious ailments [145] with the same properties as COVID-19. Globally, many people get affected with outburst COVID-19, that’s why countries have decided to announce a nationalized closure with millions of citizens firmly being quarantined [146,147,148,149]. In this kind of critical situation, outbursts predictions, and virus-transmission indicator tools which used DL and machine imaging techniques are highly potent for diagnosis and therapeutically active for coronavirus. Also, it helps to support physicians with the starting diagnosis process and quick detection of the virus accurately and efficiently.

Biomedical imaging techniques like CT Scans images are highly supportive in diagnosing disease quickly and accurately and are no different from the coronavirus. The COVID-19 positive CT scan images are considered to have better sensitivity 80–90% than RT-PCR and specificity 60–70% lower elevation [150, 4.

Table 4 Overview of DL for medical imaging practices in pandemic COVID-19
Full size table

6 Lessons, Discussions, and Future Directions

Even though DL has expanded a lot of impetus, attractiveness and produced good results with normal two- dimensional images, there are clear boundaries to achieve the same level of implementation in the use of medical image methods. The reputed research study in this concern is ongoing with some parts of the lessons have mentioned below:

  • There is one of the biggest barriers to the unavailability of large real databases with highly premium training images. To overcome this issue, data augmentation is a potential approach.

  • CT Scans & MRI images are used typically based on 3D with applied some CNN pre-trained models as ResNet-50, ResNet-101, MobileNet SqueezeNet, InceptionV3, Xception, NasNetLarge, NasNetMobile, DenseNet121, DenseNet169, DenseNet201, InceptionResNetV2, etc. to achieve better results.

  • The large dataset is split into training, validation, and testing set with a ratio of 70:20:10 to optimize the model’s performance. 10% of the data sample can be considered as test data for testing the performance of the model.

  • The unusual process for accumulate image datasets has become one of the foremost questions in medical image processing. The best way to solve this problem is to use the mechanisms of transfer learning approach that will make the pre-processing task more accurate and efficient as well as eliminate the acquisition and scanning issues.

  • It is anticipated that cloud-oriented platforms will compete for an important role in the future expansion of computational deep network applications. Using cloud computing provides a key to handling large data samples. It also assists to increase intelligence and diminish costs. In addition, it provides the flexibility to train the DL frameworks.

6.1 Discussion

In Table 5, different techniques are compared with some state-of-the-art methods for diagnosis the COVID-19 infection and yield several new observations as mentioned below:

Table 5 Comparison with the other state-of-the-art methods for COVID-19 binary and multi-classification
Full size table

6.2 Challenges and Issues

The confrontations and issues related to the implementation of DL in medical image processing to control the epidemic COVID-19 in the smart urban colonies are listed below:

  • Confidentiality—Access to high-quality images with large data samples becomes a major confront while considering the confidentiality of coronavirus-affected individual’s details.

  • Diversity outburst pattern—Data emergence followed the major aggressive variations of COVID-19 infection in different countries which lead to less reliability for predicting it.

  • Directives and precision—The global countries have strictly followed rules for compliance with the allocation of the COVID-19 dataset. Although, the datasets and case studies should be firmly collected from COVID-19 patients in a short time frame. So, this whole criterion seems very tough to handle out.

  • Inconsistency of screening actions in different hospitals plays a major problem associated with (FN) False Negatives in data label classes.

  • The indication of both pneumonia and coronavirus are quite similar. Identifying the best DL method for diagnosis COVID-19 with high efficiency still leftovers as a significant challenge.

6.3 Future Directions

Besides, the COVID-19 infection gets fully tracked based on the data which is collected from the numbers of infected patients worldwide.

  1. 1.

    The inherited chain performs to a great extent because the COVID-19 virus has a high rate of mutation. The outcome of the false diagnostic test is distressing and there are high chances of FN for an infected patient genuinely suffering from the illness. The inspection on the COVID-19 diagnosis testing followed by the committee determines the faster spreading rate from individual to individual [175].

  2. 2.

    In the COVID-19 situation, the future indicators related to some limitations of the large dataset with extra clinical information assist in improvement for disease prediction. Moreover, accessible datasets are small in size which is insufficient for correct predictions. The future advice is to use transfer learning which detects irregularities in smaller size datasets and produces efficient results. In the early diagnosis of COVID-19, algorithms are used to speed up the predicting process within less time and with minimal resources.

  3. 3.

    The transfer learning is used for the detection of COVID-19, where the time and accessibility of training data being as a crucial part. Also, this approach is usually performed on pre-trained models in academia, open-source society, research organizations, etc. to save resources and time as well. DL produces good outcomes when a large set of data samples are obtained, but with the transfer learning mechanism, a similar outcome can be attained with an inadequate dataset size [176].

  4. 4.

    In the outbreak condition, the accessibility of pre-defined data is an ultimate challenge. That’s why transfer learning has great potential to serve the aim of the true discovery of COVID-19. The researchers [177] can be focused on the lung CT scans, and X-ray images of infected patients collected from an open-public repository like GitHub. These medical images were identified to choose the suitable sample among the total images.

  5. 5.

    Other bacterial infections such as pneumonia, viral pneumonia, and normal case dataset were collected from the open repository named Kaggle. The pre-trained CNN models incorporated ML techniques for the multi-classification of COVID-19 disease into different classes.

  6. 6.

    The methodology was discussed in [10] as the database of 1427 images containing 224 cases of COVID-19, 700 Common bacterial pneumonia, and 504 normal images. Therefore, the generation of COVID-19 data repositories is a critical requirement. It leads to develo** the prognosis, diagnosis, and treatment therapies to fight against the disease. The future epidemics in health smart cities will be predicted shortly.

As discussed in traditional studies, there are various DL applications performed by using CNN pre-trained experimental models where the radiological images are very common. However, the use of these technologies in real-time practice becomes a major challenge. The background outlines should facilitate the computer-assisted systems that monitor the patient reports, data pre-processing mechanisms, and testing process for different AI techniques to ensure data intelligibility.

The citizens of today’s world are more fortunate than any old generation, who has seen the Spanish flu outburst in 1918 as a new generation has given superior technology. AI mechanism is widely used in the subject of human existence. For example, AI is used in the future for the development of self-directed robots and equipment for antimicrobial treatment, health care in hospitals, delivery of medicines along with some essentials to patients. AI is meant to be collaborated with NLP (Natural Language Processing) methodology to develop a discussion box. It is widely used for remote communication with COVID-19 infected patients and offers conferences throughout the time of emergency.

In addition to the benefits summarized above, the use of AI can cooperate in eliminating the falsehoods distributed in social media. The implementation of AI focuses on authority policies, epidemic prevention policies, and the rapidly spreading viruses and infections. It ensures realistic information by eradicating all the preventable panic patterns. In this time of crisis, the major concern is the expansion of the original vaccine against the COVID-19. AI has great potential in this study of genetic and protein synthesis of the coronavirus to speed up drug detection. AI with the DL approach will be able to detect the suitable antibiotic from 100 million large molecular datasets. It is an interesting indication of future research advice to defeat the COVID-19 epidemic.

7 Conclusion

Along with solutions to fight the epidemic COVID-19, DL is considered a high-quality strategy to offer smart intellectual resolutions. Inspired by numerous DL programs for medical imaging techniques over the past decade, it is necessary to overview the recent novel COVID-19 for healthy smart communities. DL has been carried out a variety of solutions such as prediction of coronavirus disease; virus transmitted diagnosis, detection, and therapeutic aspects, vaccine availability, and remedy research. Although the potential results, the victorious use of DL techniques to progression infected clinical images still needs a lot of time and effort and also a secure collaboration between different official higher authorities, industries, and academic groups. Also, many of the confrontations and issues linked with existing techniques as data confidentiality, the variance of outburst patterns, directives and intelligibility, and the differentiation between COVID-19 infection and non-COVID-19 indications have been discussed. At last, the study discussed the various potential indicators of DL applications in medical imaging procedures along with several other technologies as data science, cellular communications, and bio-medicine. This research work is being a great quality resource of reference and directs several novel works on medical imaging with DL in the battle aligned with COVID-19.