Search

Search Results

1. Visual Reconstruction of Irregular Crack in Austenitic Stainless Steel Based on ACFM Technique

   For the advantages of corrosion resistance, high toughness and plasticity, the austenitic stainless steel is widely used in the petrochemical special...

   **n’an Yuan, Wei Li, ... Jianchao Zhao in Recent Development of Alternating Current Field Measurement Combine with New Technology

   Chapter Open access 2024
   

2. Experimental Study of Dissimilar Double Pulse Resistance Spot Welded Austenitic Stainless Steel and Weathering Steel

   The aim of this study is to prevent thermal cracking in the fusion zone of dissimilar resistance spot weld, which arises due to the electrical and...

   **qing Li, Wei Liu, ... Peiwei Bao in Metals and Materials International

   Article 04 April 2024
   

3. Corrosion behavior of austenitic stainless steel and nickel-based welded joints in underwater wet welding

   Marine structures such as ports, bridges, pipelines, vessels, and platforms are an essential part of modern infrastructure, where the use of...

   Leandro Vaccari, Thomas Scheithauer, ... Hans Jürgen Maier in npj Materials Degradation

   Article Open access 11 May 2024
   

4. Martensitic Transformation in Austenitic Steel 316L Produced by Additive Technology

   The probability of martensitic transformation in stable 316L austenitic steel obtained using a 3D laser printer is investigated. Compressive...

   N. V. Kazantseva, Yu. N. Koemets, ... I. V. Ezhov in Metal Science and Heat Treatment

   Article 01 March 2024
   

5. Effect of Mn addition on microstructure and mechanical properties of GX40CrNiSi25-12 austenitic heat resistant steel

   Three types of steels were designed on the basis of GX40CrNiSi25-12 austenitic heat resistant steel by adding different Mn contents (2wt.%, 6wt.%,...

   Guan-yu Jiang, Meng-wu Wu, ... Yu-yuan Zhu in China Foundry

   Article 08 March 2024

6. Evaluation of hot hardening resource of die steel with controlled austenitic transformation during exploitation

   In this work there is evaluation of the life of hot strengthened die steel with controlled austenitic transformation during exploitation. For this...

   A. A. Krugljakow, S. O. Rogachev, ... D. V. Priupolin in Metallurgist

   Article 10 June 2024
   

7. Tribological Behaviour of Austenitic Stainless Steel-Clad Surface Over Low Carbon Steel Produced by Cold Metal Transfer Welding Process

   Low carbon steel has become an in-demand material in various industrial applications due to its versatility and cost-effectiveness. Despite its...

   Varsha Mishra, N. Yuvaraj, Vipin in Transactions of the Indian Institute of Metals

   Article 19 February 2024
   

8. An Evaluation of WC-Co Tool Tip Scraps Reinforcement in the Hadfield Austenitic Manganese Steel Fabricated In Situ Steel Casting

   Research on the use of WC-Co tool tip scraps inserts into Hadfield austenitic manganese steel was conducted to enhance the wear resistance of a...

   Muhammad Rizki Gorbyandi Nadi, Gita Novian Hermana, ... Ari Siswanto in Metallography, Microstructure, and Analysis

   Article 11 October 2023
   

9. Stress-strain model of austenitic stainless steel for pressure vessel design

   Design by analysis based on the elastic-plastic method is becoming increasingly important for modern pressure vessels operating under extreme...

   Haigui Fan, Yuting **e, Qing Wang in Journal of Mechanical Science and Technology

   Article 03 July 2023

10. Heat Treatment of Corrosion-Resistant Austenitic-Ferritic Steel For Immersion Pumps

    The effect of quenching modes on the structure, phase composition and hardness of austenitic-ferritic stainless steel 20Kh25N8AD3M2 is studied by...

    R. S. Fakhurtdinov, Yu. A. Puchkov, ... A. G. Degtyareva in Metal Science and Heat Treatment

    Article 01 July 2023
    

11. Bulging Distortion of Austenitic Stainless Steel Sheet on the Partially Penetrated Side of Non-Penetration Lap Laser Welding Joint

    Non-penetration laser welding of lap joints in austenitic stainless steel sheets is commonly preferred in fields where the surface quality is of...

    Chengwu Yao, Enze Liu, ... Binying Nie in Chinese Journal of Mechanical Engineering

    Article Open access 16 January 2024
    

12. Analysis of Edge Crack Defect Analysis and Control of 316L Austenitic Stainless Steel

    During the hot deformation process, austenitic stainless steel is prone to defects such as edge cracking and edge damage. The effects of heating...

    Meiling Liu, ** Su, ... Qiwei Chen in Metallography, Microstructure, and Analysis

    Article 18 July 2023
    

13. Processing map and dynamic recrystallization behaviours of 316LN-Mn austenitic stainless steel

    The hot deformation behaviours of 316LN-Mn austenitic stainless steel were investigated by uniaxial isothermal compression tests at different...

    Shaolong Sheng, Yanxin Qiao, ... Bin Xu in International Journal of Minerals, Metallurgy and Materials

    Article 01 December 2023

14. Electron Microscope Study of Phase Transformations in 316L Austenitic Steel Produced via Laser 3D Printing

    Abstract

    An analysis is performed of the structure and phases of porous samples of the 316L austenitic steel obtained via laser 3D printing. Residual...

    N. V. Kazantseva, N. I. Vinogradova, ... D. I. Davidov in Bulletin of the Russian Academy of Sciences: Physics

    Article 23 October 2023
    

15. Effect of Strain Hardening on Wear and Corrosion Resistance of 316L Austenitic Stainless Steel

    The wear and corrosion resistance of 316L austenitic stainless steel after strain hardening were studied. 316L austenitic stainless steel was...

    Guoqing Sun, Jiaqi Huang, ... Wang** Wu in Journal of Materials Engineering and Performance

    Article 01 August 2023
    

16. Structural Changes in the Surface Layers of a High-Strength Austenitic VNS-53 Steel during Wear Tests

    Abstract —The tribotechnical characteristics of a high-nitrogen austenitic VNS-53 steel are studied under dry sliding friction in contact with a...

    G. S. Seval’nev, M. E. Druzhinina, ... R. U. Kadyrov in Russian Metallurgy (Metally)

    Article 01 July 2023
    

17. Stress Relaxation Behavior of a Nb-Stabilized Austenitic Stainless Steel at 550 ℃

    Stress relaxation resistance is one of the most significant properties that are critical to the service life of the fasteners. In this study, the...

    Shuzhan Zhang, **anbo Shi, ... Ke Yang in Acta Metallurgica Sinica (English Letters)

    Article 17 October 2023
    

18. Experimental Analysis of the Mechanical Properties of Austenitic S30408 Stainless Steel Welded Joints at Low Temperatures

    Austenitic S30408 stainless steel exhibits good low-temperature resistance and good welding performance. This steel is often used in liquefied...

    Hongbo Liu, Longxuan Wang, ... **g Li in International Journal of Steel Structures

    Article 21 July 2023
    

19. Deformation Stages of Austenitic Cast SteeL 60Cr24NMn16 Under Different Boundary Loading Conditions

    A method for determining the characteristics of strain hardening of a material using the standard OriginPro program is proposed. The method allows...

    E. E. Deryugin, I. V. Vlasov, Yu. F. Gomorova in Russian Physics Journal

    Article 02 January 2024

20. Electrolyte-Plasma Nitriding of Austenitic Stainless Steel under Cathodic and Anodic Polarity

    Abstract —

    The article presents the results of surface modification of austenitic stainless steel by electrolyte-plasma nitriding under anodic and...

    S. A. Kusmanov, I. V. Tambovskii, ... E. V. Sokova in Surface Engineering and Applied Electrochemistry

    Article 17 October 2023