Search

Search Results

1. Rheological Properties of Polyacrylamide and Modified Polyacrylamide Under Specific Heating Effect and pH Effect Between Fann Viscometer and Marsh Funnel

   This study is to determine the comparison of rheological properties between bare polyacrylamide (PAM) and modified PAM using two different...

   ** Kwei Koh, Chin Wei Lai, ... Wei Wei Chua in Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23)

   Conference paper 2023
   

2. eCapillary: a disposable microfluidic extensional viscometer for weakly elastic polymeric fluids

   We report a disposable microfluidic extensional viscometer based on an optimized hyperbolic contraction–expansion geometry. This “eCapillary” device...

   Naureen S. Suteria, Siddhartha Gupta, ... Siva A. Vanapalli in Rheologica Acta

   Article 20 May 2019
   

3. Investigation of Two-Phase State of Fe–Cu Melts during Cooling in a Viscometer

   Abstract

   Fe–Cu alloys can be characterized as a system with immiscible components (IC). This statement is based on a weak mutual solubility in the...

   M. R. Filonov, V. V. Sanin, ... S. N. Vidineev in Steel in Translation

   Article 01 November 2019
   

4. Gelation and anomalous viscosity dynamics in aqueous dispersions of synthetic hectorite

   Exfoliated clay nanosheets (CNSs) of synthetic hectorite (s-hectorite) have been used for synthesizing advanced functional materials and gels that...

   Yuji Kimura, Shoichi Shimizu, Kazutoshi Haraguchi in NPG Asia Materials

   Article Open access 01 April 2022
   

5. Preparation of high-solid, low-viscosity waterborne polyurethane: based on multiparticle size composite emulsification

   In this paper, waterborne polyurethane (WPU-SL) with high solid content and low viscosity was successfully prepared by compounding large particle...

   Kunpeng Lou, Siliang Li, ... Bo **g in Journal of Coatings Technology and Research

   Article 29 December 2023
   

6. Viscosity and Free Energy of the Activation of a Viscous Flow of Sodium Borrate Melts

   Abstract

   The viscosity of sodium borate melts is measured in the temperature range 918–1655 K using a vibrating viscometer operating in the forced...

   S. Yu. Melchakov, A. A. Khokhryakov, ... D. A. Yagodin in Glass Physics and Chemistry

   Article 28 June 2022
   

7. The properties of cuplump-modified bitumen with wax

   This study focussed on investigation of fundamental properties of cuplump-modified bitumen (CMB) modified with an additive Ethylene Bis Stearamide...

   Kamarul Arifin Hadithon, Mazlina Mustafa Kamal, ... Nazirah Ahmad in Journal of Rubber Research

   Article 23 September 2022
   

8. Viscosity of Liquid Metal Flow

   Viscosity is an important physical property of liquid metals, which is a research focus from both theoretical and practical perspectives. Currently,...

   Lei Wang, Yongyu Lu in Handbook of Liquid Metals

   Living reference work entry 2024
   

9. Effect of MgO on the Viscosity and Structure of CaO-Al₂O₃-B₂O₃-Based Non-reactive Mold Flux

   The effect of MgO on the viscosity and structure of CaO-Al ₂ O ₃ -B ₂ O ₃ -based non-reactive mold flux was studied by rotational viscometer, molecular...

   Ke Liu, Yihua Han, ... **angtao Yu in Metallurgical and Materials Transactions B

   Article 25 February 2022
   

10. Effect of PEG Addition on the Behavior of Aluminum Sol, Dry Gel, and Film

    Aluminum sol, dry gel, and film were prepared by sol-gel and a dip**-withdrawing method. The effect of polyethylene glycol (PEG) on the behavior of...

    Pei**g Tian, Man Li, ... **g Wang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 19 December 2021

11. Establishment of calculation model for the viscoplastic heat production in friction stir welding process

    Friction stir welding (FSW) is a solid-phase welding method. Weld forming and welding quality are related to the heat generated by plastic flow in...

    Fang Yan, YuCun Zhang, ... Songtao Mi in Welding in the World

    Article 28 April 2021
    

12. Direct Determination of Viscosity of Supercritical Solutions

    The following chapter is mainly aimed at simulators and crystal growers, as viscosity has an influence on the flow behaviour in the reactor and the...

    Thomas G. Steigerwald, Eberhard Schlücker in Ammonothermal Synthesis and Crystal Growth of Nitrides

    Chapter 2021
    

13. Influence of Silicon Carbide on Shear-Thinning Behavior of CaO-SiO₂-CaF₂-Based Mold Fluxes

    To control the shear property of a calcium silicate mold flux, we incorporated carbon (C) into it in the form of SiC. We measured the flux’s...

    Young-Chan Jeong, Seung-Ho Shin, ... Jung-Wook Cho in Metallurgical and Materials Transactions B

    Article 26 April 2021
    

14. Emulsion polymerization process: effects of particle nucleation mechanism on properties of acrylic-styrene latex

    The properties of acrylic-styrene latex (ASL) were investigated  using two different nucleation methods by changing the sequence of addition of...

    A. Sardari, V. Mannari in Journal of Coatings Technology and Research

    Article 27 March 2024
    

15. Viscosity and Its Correlation to the Ionic Structure of CaO–Al₂O₃–B₂O₃ Slags with Various La₂O₃ Additions

    The relationship between the viscosity and ionic structure of CaO–Al ₂ O ₃ –B ₂ O ₃ slag with different La ₂ O ₃ contents was studied using a rotating...

    Lei Fan, Chengjun Liu, Maofa Jiang in Metallurgical and Materials Transactions B

    Article 15 February 2022
    

16. Control of Surface Longitudinal Cracks During the Steel Continuous Casting

    The surface longitudinal cracksSurface longitudinal cracks have been one of the most serious defectsDefects in the cast products. In this study, the...

    Fengkang Wang, Jie Zeng, Wanlin Wang in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2024
    

17. Effects of BaO Content and CaO/Al₂O₃ Ratio on the Properties and Structure of Aluminate Slag

    To explore the relationship between typical components, structure, and properties, and provide theoretical guidance for non-reactive aluminate slag,...

    Jie Lei, Wen Yang, ... Hai-chuan Wang in Metallurgical and Materials Transactions B

    Article 10 May 2022
    

18. Structure and viscosity of slags containing cerium oxide

    The effect of cerium oxide on the viscosity and crystallization temperature of slags of the CaO–SiO ₂ –Ce ₂ O ₃ –Al ₂ O ₃ –MgO oxide system is studied using an...

    A. G. Upolovnikova, R. R. Shartdinov, A. N. Smetannikov in Metallurgist

    Article 02 May 2024
    

19. Imidization of styrene–maleic anhydride copolymer for dispersing nano-SiO₂ in water

    Achieving functional styrene–maleic anhydride (SMA) copolymer dispersant is highly attractive but still remains a challenge. Conventional modified...

    Tao Xue, Caili Yu, ... Faai Zhang in Journal of Coatings Technology and Research

    Article 20 June 2023
    

20. Influence of the Bio-lubricant Along with Nano Compounds as Additives on the Properties of the Lubricant

    Lubricant oils play a vital role in all areas with the purpose of reducing wear, smooth functioning of the system, reducing cutting temperature,...

    S. Nithya Poornima, V. Shantha in 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023)

    Conference paper 2024