Search

Search Results

1. On the Shear-Thinning of Alkanes

   The approximate power law dependence of the apparent viscosity of liquids on shear rate is often argued to arise from a distribution of energy...

   Hongyu Gao, Martin H. Müser in Tribology Letters

   Article Open access 20 December 2023
   

2. Experiments and numerical modelling of secondary flows of blood and shear-thinning blood analogue fluids in rotating domains

   The transition from concentric primary flow to non-tangential secondary flow of blood was investigated using experimental steady shear rheometry and...

   Nathaniel S. Kelly, Harinderjit S. Gill, ... Katharine H. Fraser in Rheologica Acta

   Article Open access 10 May 2024
   

3. Elastic and shear-thinning effects in contraction flows: a comparison

   The flow through a 4:1 planar contraction has  been investigated using different rheological models having the same shear viscosity, namely, the...

   Karen Y. Pérez-Salas, Erika. L. García-Romero, ... Juan P. Aguayo in Rheologica Acta

   Article Open access 27 June 2024
   

4. Role of shear thinning in the flow of polymer solutions around a sharp bend

   Abstract

   In flows with re-entrant corners, polymeric fluids can exhibit a recirculation region along the wall upstream from the corner. In general,...

   Kimberlee S. M. Keithley, Jacob Palmerio, ... Michael Cromer in Rheologica Acta

   Article 12 June 2023
   

5. Lateral particle migration in shear-thinning colloidal dispersion

   Colloidal dispersions have been frequently encountered in a wide range of industrial applications, such as foods, paints, and Li-ion electrode...

   Young Hwan Kim, Tae Soup Shim, Ju Min Kim in Korea-Australia Rheology Journal

   Article 06 October 2022
   

6. The conflicting role of shear thinning and extensional thickening on corner vertex within entry flow for branched and filled polymer melts

   Vortex growth is related to the extensional thickness viscosity of polymer melts flowing through contractions, whereas the shear thinning viscosity...

   Huan-Chang Tseng in Korea-Australia Rheology Journal

   Article 31 August 2023
   

7. Integrated Electric Spark Testing of Continuity and Unacceptable Thinning of Dielectric Coatings

   Abstract

   At present, the main method for detecting continuity defects in dielectric coatings is the electrospark method of nondestructive testing...

   V. A. Syas’ko, B. Ya. Litvinov, A. S. Musikhin in Russian Journal of Nondestructive Testing

   Article Open access 01 September 2022
   

8. Wall Thinning at the Vertex of an Angle Piece for Bending in a Tool Die

   Abstract

   Finite element simulation of the bending of plates of a sheet material in a tool die is performed in the Deform-3D software package to reveal...

   V. A. Tarasov, V. D. Baskakov, ... R. V. Boyarskaya in Russian Metallurgy (Metally)

   Article 01 December 2021
   

9. Numerical Simulation of a Viscoelastic Thinning Process for Preparing Flexible Glasses by Redrawing Method

   The forming process of the flexible ultrathin glasses (UTG) prepared by the redrawing method was numerically simulated using ANSYS Polyflow software....

   Bing Liu, Jian Yuan, ... Weihong Zheng in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 16 January 2023

10. Microstructure Evolution and Micro-nano-mechanical Properties of 6061 Aluminum Alloy in Hot Flow Forming under Different Thinning Rates

    Microscopic plastic deformation mechanism of hot flow forming of 6061 aluminum alloy was analyzed by nanoindentation experiments and numerical...

    Han Zhang, Tingting Zhang, ... Wenxian Wang in Journal of Materials Engineering and Performance

    Article 23 January 2023
    

11. Influence of Silicon Carbide on Shear-Thinning Behavior of CaO-SiO₂-CaF₂-Based Mold Fluxes

    To control the shear property of a calcium silicate mold flux, we incorporated carbon (C) into it in the form of SiC. We measured the flux’s...

    Young-Chan Jeong, Seung-Ho Shin, ... Jung-Wook Cho in Metallurgical and Materials Transactions B

    Article 26 April 2021
    

12. Preparation and Energy Storage Assessment of Ti3C2 2d MXene and Its Possible Thinning Mechanism

    Since after its discovery, MXene has captivated the focus of many researchers. In this work, we report on the low-temperature synthesis of Ti3AlC2...

    Diya Singh, Pinki Rani, ... Prashant S. Alegaonkar in Recent Advances in Nanotechnology

    Conference paper 2023
    

13. Influence of protective layer thinning on the electrocaloric performance of 0.8Ba(Ti_0.82Zr_0.18)O₃–0.2Ba(Ti_0.9Sn_0.1)O₃ multilayer ceramic films

    The multilayer electrocaloric ceramics (MLEC) are promising candidates for environmentally friendly refrigeration, since it possesses large...

    Saisai Li, **ngjia Li, ... Haisheng Xu in Journal of Materials Science: Materials in Electronics

    Article 12 October 2022
    

14. A novel scalable thinning route to enhance long-term stability of layered cathode materials for Li-ion batteries

    A high-pressure micro-fluidization method is applied to layered cathode materials to obtain few-layered nanosheets for the first time. The effect of...

    Semih Engün, Kamil Burak Dermenci, ... Servet Turan in Journal of Materials Science

    Article 01 January 2023
    

15. Forming Analysis on the Effect of Ultra-Thinning of Sheet Metals Based on a Stress Rate Direction-Dependent Constitutive Model

    In formability evaluation, it is important to accurately predict the onset timing and morphology of fracture in a workpiece from a physical point of...

    Tetsuo Oya, Koichi Ito, ... Naomichi Mori in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

16. Research on the 5A06 Aluminum Alloy Thin-Walled Elbow in Cold Stam** Condition

    5A06 aluminum alloy exhibits low density, high strength, and excellent corrosion resistance, which is widely used in areas of the aerospace,...

    **aomin Huang, Ben Guan, Yong Zang in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

17. Analysis of the Thinning Mechanism of an Aluminum Alloy in Friction Stir Welding Based on the Indirect Extrusion–Vortex Flow Filling Model

    Different morphology and thinning cases of the weld zone of a 7022 aluminum alloy in friction stir welding were analyzed. Metal plastic flow...

    Z. Y. Xu, H. B. Lin in Strength of Materials

    Article 01 July 2020
    

18. Experimental and Numerical Study on the Impact of Sand-Carrying Liquid Erosion on Coiled Tubing Wall

    Coiled tubing endures significant pressure and fluid impact throughout the oil and gas production and transportation processes. The abrasive action...

    Jie Zheng, Zifan Xu, ... Kun He in Journal of Failure Analysis and Prevention

    Article 27 May 2024
    

19. Square Tube Fabrication by Expansion Drawing of Circular Tube

    An investigation was made on the application of expansion drawing for processing a circular parent tube to a square tube with high dimensional...

    Shohei Kajikawa, Yusuke Kato, ... Masayoshi Akiyama in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

20. Deep Learning Enabled Tool Compensation for Addressing Shape Distortion in Sheet Metal Stam**

    This paper presents a novel deep learning-based platform for addressing shape distortion in sheet metal stam** (e.g., springback, thermal...

    H. R. Attar, L. Zhu, N. Li in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024