Search

Search Results

1. Modeling and Optimization of Surface Quality Characteristics in Electrochemical Surface Grinding of Metal Matrix Composite

   Study of complex machining behavior of metal matrix composites has always been a matter of investigation. The different mechanical, physical and...

   Dhruv Kant Rahi, Avanish Kumar Dubey in Journal of Materials Engineering and Performance

   Article 15 May 2023
   

2. Improvement of Surface Quality of AISI 1010 Steel Plates by Ball Burnishing

   Ball burnishing has been an effective surface finishing process that generally requires pressing hardened steel rolls/balls, during feed motion, into...

   F. Gharbi, K. J. Al-Fadhalah, M. Tharwan in Journal of Materials Engineering and Performance

   Article 05 September 2023
   

3. Precipitates Generation Mechanism and Surface Quality Improvement for Aluminum Alloy 6061 in Diamond Cutting

   To improve the surface quality for aluminum alloy 6061(Al6061) in ultra-precision machining, we investigated the factors affecting the surface finish...

   Hailong Wang, Wen** Deng, Sujuan Wang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 17 January 2024

4. Improving Surface Quality and Fatigue Life of Electron Beam Melted Ti6Al4V by Chemical Machining

   Due to the high demand for innovative parts from the aerospace, biomedical, and automotive industries, 3D printing of titanium parts is widely...

   Emanuele Manco, Fabio Scherillo, ... Rosario Borrelli in Journal of Materials Engineering and Performance

   Article Open access 27 November 2023
   

5. Nanoparticle-Enhanced Castability of Aluminum Alloy 2024: Fluidity, Hot Cracking, and Surface Quality

   Aluminum alloy 2024 provides high mechanical properties and good machinability for high-performance applications. However, the poor castability of...

   Guan-Cheng Chen, **aochun Li in Metallurgical and Materials Transactions A

   Article 29 December 2023
   

6. Effect of laser cleaning the anodized surface of 5083 aluminum alloy on weld quality

   In this paper, the nanosecond pulse laser was used to clean the anodic oxide film on the surface of 5083 aluminum alloy. The effect of different...

   Wei Wang, Qingyu Jiang, ... Jia Wang in Welding in the World

   Article 06 February 2024
   

7. The Effect of Cutting Parameters on Surface Quality and Corrosion Resistance of Micro-machined Surfaces of 7075 Aluminum Alloy

   The objective of this study is to investigate the impact of cutting parameters on the corrosion resistance of micro-machined surfaces. Through a...

   ** Zhang, Junling Liu, ... Qingqun Mai in Journal of Materials Engineering and Performance

   Article 30 August 2023
   

8. High-quality AlGaN epitaxial structures and realization of UVC vertical-cavity surface-emitting lasers

   AlGaN-based vertical-cavity surface-emitting lasers (VCSELs) have garnered recent interest due to their superior material properties and device...

   Zhongming Zheng, Yukun Wang, ... Bao** Zhang in Science China Materials

   Article 17 January 2023
   

9. Drilling of GFRP with Liquid Silicon Rubber Reinforced with fine Aluminium Powder on Hole Surface Quality and Tool Wear using DOE

   The efforts are made to study the effect of machining parameters: speed, feed, tool tip angle, and tool material on hole quality: surface finish, and...

   Giridhar S. Kulkarni, N. G. Siddeshkumar, ... R. Suresh in Journal of Bio- and Tribo-Corrosion

   Article 20 June 2023
   

10. Rapid exfoliation and surface hydroxylation of high-quality boron nitride nanosheets enabling waterborne polyurethane with high thermal conductivity and flame retardancy

    Boron nitride nanosheets (BNNS) hold significant promise as functional additives in thermal management materials for high-density and high-power...

    Hao Jiang, **dao Li, ... Delong **e in Advanced Composites and Hybrid Materials

    Article 06 January 2024
    

11. Experimental Research on Preparation and Grinding Surface Quality of Coated Micro-Grinding Tools

    In this paper, the flow ratio and radio frequency power optimization experiments of hydrogenated diamond-like carbon (H-DLC) coating were carried...

    Chengbao Wang, Xuelong Wen, ... Fuqiang Sun in Journal of Materials Engineering and Performance

    Article 16 May 2022
    

12. Optimization of Ni60A Coating Quality by Supersonic Plasma Spraying Based on Response Surface Methodology

    The use of advanced thermal spray technology for surface modification of aluminum alloy parts for automobiles can greatly improve the surface...

    Bing-yuan Han, Jia-jie Chu, ... Sheng Zhu in Journal of Thermal Spray Technology

    Article 19 April 2023
    

13. Cryogenic and Dry Machining of Ti6Al4V Alloy for Evaluation of Microhardness, Thermal Loads, Microstructure, and Surface Quality

    Cryogenic cooling is an efficient technology to facilitate the machining process of difficult-to-cut materials. Performing this process with nontoxic...

    Mohammad Meghdad Fallah, Farshid Jafarian in Journal of Materials Engineering and Performance

    Article 14 November 2022
    

14. Studying the Influence of Stress Factors on the Bar Surface Quality during Rolling in Roughing Train

    Abstract

    This article discusses the mechanism of formation of surface defects of rolling origin on hot rolled bar at 370/150 wire rod mill of the BMZ...

    I. A. Pankovets, M. N. Vereshchagin in Steel in Translation

    Article 01 August 2022
    

15. Analysis of the Technology of Automation of Surface Layer Quality Management during Turning

    Abstract

    The quality management of the surface layer during turning is one of the most challenging problems today. The importance of the problem is...

    V. A. Zobov, D. A. Chernousov in Russian Metallurgy (Metally)

    Article 01 December 2021
    

16. Research on the Relationship between Surface Defects and Preparation Quality Evaluation of Ni-Based Single Crystal Alloy

    The preparation quality of Ni-based single crystal alloy (NSCA) can be qualitatively reflected based on its surface defects. However, the...

    Hongyan Zhou, Ben Li in Journal of Materials Engineering and Performance

    Article 19 August 2022
    

17. Influence of Magnesium Alloy Surface Preparation Quality During Plasma Welding with a Reverse Polarity Current on Deposited Metal Structure and Properties

    Results are given for a study of structure and property formation of products made of high strength light alloy ML5 of the...

    D. S. Belinin, Yu. D. Shchitsyn, ... Yu. Shengfu in Metallurgist

    Article 30 November 2022
    

18. Experimental Study on Surface Quality in Ultrasonic-assisted Grinding of C/C-Zrc-Cu Composites Fabricated with Different Preforms

    C/C-ZrC-Cu composite is a new ablation-resistant material with wide application prospects in the aerospace field. The quality of its surface affects...

    Zhenyan Duan, Tao Chen, ... Haotian Li in Applied Composite Materials

    Article 09 June 2022
    

19. Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing

    High-quality micro-hole processing of superalloy has always been challenging work in the aerospace and automobile industries. A novel...

    ** Wang, Bing Han, ... Shufeng Sun in Metals and Materials International

    Article 25 November 2022
    

20. Investigation of Top Burr Formation in Micromilling for Surface Quality Improvement

    This paper deals with the study of top burr formation mechanism in downmilling operation on Ti6Al4V. Detailed and simplified flute locus in the...

    Mohan Kumar, Vivek Bajpai in Journal of Materials Engineering and Performance

    Article 19 September 2022