Search

Search Results

1. Superior Strain Rate Strengthening Effect and Ductility of a Ti-4.5Al-2.9V-3Fe Alloy under High Strain Rate Loading

   The mechanical response of the Ti-4.5Al-2.9V-3Fe alloy demonstrates a significant strain rate strengthening effect and strong ductility at high...

   Yuzhong Hui, Jianghua Shen, ... Zhongbin Tang in Journal of Materials Engineering and Performance

   Article 20 December 2023
   

2. Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel

   In this paper, mechanical properties and microstructure evolution of an economical 19Cr-type TRIP-aided duplex stainless steel were investigated...

   Qingxuan Ran, **aoru Yang, ... Zhihao Feng in Journal of Materials Engineering and Performance

   Article 27 January 2022
   

3. The effect of the strain rate on the longitudinal modulus of cellulosic fibres

   The longitudinal stiffness of cellulosic fibres plays an important role in the mechanical performance of many products these fibres are used for....

   Marko Zizek, Caterina Czibula, Ulrich Hirn in Journal of Materials Science

   Article Open access 22 September 2022
   

4. Strain-rate Dependence of Electrically Modified Unidirectional Carbon/epoxy Laminates Under In-plane Tensile Loading

   This experimental work aims to investigate the strain-rate effect on a unidirectional carbon fiber-reinforced epoxy laminate system with enhanced...

   Sahand Shamchi, **aosu Yi, Pedro M. G. P. Moreira in Applied Composite Materials

   Article 01 October 2022
   

5. Effect of the Rate and Temperature of Hot Deformation on Strain Resistance of Duplex Stainless Steel

   The effect of the temperature and rate of hot deformation on the structure and strain resistance of duplex stainless steel DSS 2205 is considered....

   Zhichao Li, **g Wu, ... Zhihui Cai in Metal Science and Heat Treatment

   Article 01 May 2023
   

6. Effect of Strain Aging on the Rate Dependence of the Strain Resistance and the Cold Resistance of Low-Carbon Steels with Ferritic–Pearlitic and Bainitic Structures

   Abstract

   The peculiarities of strain aging of low-alloy pipeline steels with various structural states (ferritic–pearlitic, bainite) are studied....

   A. R. Mishet’yan, G. A. Fillipov, O. N. Chevskaya in Russian Metallurgy (Metally)

   Article 13 October 2021
   

7. High Strain Rate Mechanical Behavior of Polyamide 66 and Polyamide 66-Glass Fiber Reinforced

   The effect of glass fiber-reinforcement polymer Polyamide 66 on the uniaxial compressive mechanical response was measured over a wide strain-rate...

   T. Gómez-del Río, A. Ruiz in Mechanics of Composite Materials

   Article 06 January 2024
   

8. Theoretical Modeling of Temperature, Strain Rate and Porosity Dependent Yield Strength of Porous Metallic Material

   Yield strength is one of the most crucial mechanical parameters for porous metal materials. A comprehensive study of the influence of temperature,...

   Haibo Kou, Kaiyue Dou, ... Jian Zhang in Journal of Materials Engineering and Performance

   Article 20 May 2024
   

9. High Strain-Rate Characterisation of Vanadium

   The mechanical response of the body centred cubic metal vanadium has been studied across a wide range of strain-rates through uniaxial stress...

   G. Whiteman, L. J. Lea, ... D. M. Williamson in Journal of Dynamic Behavior of Materials

   Article 21 August 2023
   

10. Strain rate dependence of inelastic strain recovery in ultrafine-grained Al films with different textures

    Abstract

    We investigated the tensile load–unload response and inelastic strain recovery in freestanding ultrafine-grained aluminum films with highly...

    Ehsan Izadi, Rohit Berlia, Jagannathan Rajagopalan in MRS Advances

    Article 08 July 2021
    

11. Significant strain-rate dependence of sensing behavior in TiO₂@carbon fibre/PDMS composites for flexible strain sensors

    Carbon fibre (CF) embedded into elastomeric media has been attracting incredible interest as flexible strain sensors in the application of skin...

    Fan Zhang, Hailong Hu, ... Jianling Yue in Journal of Advanced Ceramics

    Article Open access 27 September 2021
    

12. Effect of Non-metallic Inclusions on the Temperature and Strain-Rate-Dependent Strength, Deformation and Toughness Behavior of High-Strength Quenched and Tempered Steel

    This chapter presents results of investigations on the strength, deformation and toughness behavior of quenched and tempered 42CrMo4 steel....

    Kevin Koch, Sebastian Henschel, Lutz Krüger in Multifunctional Ceramic Filter Systems for Metal Melt Filtration

    Chapter Open access 2024
    

13. High Strain-Rate Testing of Brittle Materials Using Miniature Beryllium Split-Hopkinson Pressure Bars

    Split-Hopkinson Pressure Bars (SHPB) or “Kolsky” bars are often employed for determining the high-rate compressive failure strength of high-strength...

    Bryan Zuanetti, Kyle Ramos, ... Cynthia Bolme in Characterization of Minerals, Metals, and Materials 2023

    Conference paper 2023
    

14. Strain-rate sensitivity maps and the estimation of ductility for low temperature superplasticity

    The ability of a material to stretch in tension is strongly influenced by the strain rate sensitivity and this parameter plays an even bigger role...

    Roberto B. Figueiredo in Journal of Materials Science

    Article 22 February 2024
    

15. Manufacturing Process Effect on the Mechanical Properties of Glass Fiber/Polypropylene Composite Under High Strain Rate Loading: Woven (W-GF-PP) and Compressed GF50-PP

    Long glass fiber thermoplastic laminates have garnered significant attention for their potential use in designing structural parts across various...

    M. Shirinbayan, N. Abbasnezhad, ... J. Fitoussi in Applied Composite Materials

    Article 04 July 2023
    

16. Molecular Dynamic Study of Dependency on Mechanical Characteristic of Nanocrystalline Copper over Various Temperature and Strain Rate

    Nanocrystalline copper is one of the best suited materials for integrated chips industries due to its high mechanical stability and less resistivity....

    Mahesh Kumar Gupta, Santosh Kumar Rai, ... Rakesh Kumar Haldkar in Physics and Mechanics of New Materials and Their Applications

    Conference paper 2024
    

17. Measuring the Effect of Strain Rate on Deformation and Damage in Fibre-Reinforced Composites: A Review

    This review aims to assess publications relevant to understanding the rate-dependent dynamic behaviour of glass- and carbon-fibre reinforced polymer...

    J. I. Perry, S. M. Walley in Journal of Dynamic Behavior of Materials

    Article Open access 15 February 2022
    

18. The Effect of Strain Rate on the Compression Behavior of Additively Manufactured Short Carbon Fiber-Reinforced Polyamide Composites with Different Layer Heights, Infill Patterns, and Built Angles

    Previous studies on the fused deposition modelling (FDM) processed short carbon fiber/Polyamide 6 (PA6) matrix composites and neat PA6 have mostly...

    Mehmet Kaan Zeybek, Mustafa Güden, Alper Taşdemirci in Journal of Materials Engineering and Performance

    Article 10 February 2023
    

19. Effect of Microstructure, Strain Rate, and Elevated Temperature on the Compression Property of Fe–Co–Ni–Cr–Zr Alloy

    Eutectic high-entropy alloys with FCC solid solution phase and hard Laves phase can be used as potential structural materials to meet the service...

    P. C. Zhang, B. Zhai, H. P. Wang in Metallurgical and Materials Transactions A

    Article 16 November 2022
    

20. Effect of grain size on strength and strain rate sensitivity in metals

    The effect of the grain size on the mechanical properties of metallic materials has been a topic of significant interest for researchers and...

    Roberto B. Figueiredo, Terence G. Langdon in Journal of Materials Science

    Article 14 February 2022