Search
Search Results
-
Material Characterization of 550D Reinforcing Steel Bar at High Strain Rates
Reinforcing steel bars play a crucial role in reinforced concrete constructions. To comprehend the behavior of reinforced concrete structures under...
-
Dynamic Fracture of Fibre-Reinforced Concrete Depending on the Shape and Material of the Reinforcing Fibre
The strain rate sensitivity of the compressive strength of fibre-reinforced concrete (FRC) to the applied load, which is observed during dynamic...
-
Enhanced tribology properties induced by eutectic microstructure strengthening and in-situ reinforcing in laser cladded composite coating
With the development of laser deposition technology, the Invar alloy matrix materials is a kind of potential laser deposited coating because of low...
-
Nano-Modified Epoxy Coatings for Enhanced Corrosion Inhibition in Reinforcing Bars
Epoxy coatings are one of the effective methods of physical protection to protect metal from corrosion in aggressive media. In order to maximize the...
-
Bond Behavior Between Ultra-High Performance Concrete (UHPC) and Steel Bar with Different Strengths
To investigate the bond behavior of ultra-high performance concrete (UHPC) and steel bar, central pull-out tests of 48 cube bond specimens were...
-
Structural-Phase Composition and Hardness of Steel of the Fe–Cr–Mn–Mo–Al–Mg–N–C System Obtained by the Method of Self-Propagating High-Temperature Synthesis Under Nitrogen Pressure
The possibility of obtaining solid ingots (without gas porosity) of steel of the Fe–Cr–Mn–Mo–Al–Mg– N–C system by the method of self-propagating...
-
On Thermomechanical Effects in Elastic Media with Reinforcing Rods (Fibers)
Within the framework of the theory of thermoelasticity, the problem of investigating the influence of thermomechanical compatibility and...
-
Fractographic Characterization of Steel Nanoparticulates-Reinforced Copper Matrix Composites Subjected to Static, Cyclic, and Dynamic Mechanical Loading
Improving the mechanical properties of high-conductive materials like pure copper without any serious adverse effect on their conductivity attracts...
-
Nano-TiC-reinforced 18Ni300 steel manufactured by Powder Bed Fusion-Laser Beam with improved wear resistance for mould inserts
In injection moulding, surfaces can be exposed to harsh working conditions, especially when polymers reinforced with abrasive glass fibres are used....
-
Mechanical and Magnetic Properties of Chromium–Nickel Maraging Stainless Steel 04Kh13N8MTYu–VI
AbstractCurrently, the development of new high performance magnetoelectric engines and generators that require high strength materials with specific...
-
Blast Response of Reinforced Concrete Slab Stiffened with Structural Steel
In this investigation, effect of structural steel stiffening on the response of a simply supported reinforced concrete slab under air blast loading...
-
Study on In-Situ Particle Strengthening Behavior of Intermetallic Compounds at Interface of Roll-Bonded Steel/aluminum Laminate
Roll-bonded steel-aluminum laminates have broad application prospects. Intermetallic compounds (IMCs) are precipitated phases produced at bonding...
-
Investigation on Intermetallic Compounds Formation and Effect of Reinforcing Particles during Friction Stir Vibration Brazing
In this paper, low carbon steel sheets were joined by the application of friction stir brazing (FSB) and friction stir vibration brazing (FSVB)...
-
Comparative study on effects of steel fiber and imitation steel fiber on dynamic tensile properties of ultra-high-performance cementitious composites
Steel fibers (SFs) are commonly used to enhance the performance of concrete. However, they possess limitations such as susceptibility to corrosion,...
-
An Evaluation of WC-Co Tool Tip Scraps Reinforcement in the Hadfield Austenitic Manganese Steel Fabricated In Situ Steel Casting
Research on the use of WC-Co tool tip scraps inserts into Hadfield austenitic manganese steel was conducted to enhance the wear resistance of a...
-
Influence of Fire on Steel Reinforcement of R.C.C Elements
Repair and rehabilitation of fire damaged buildings is a popular topic due to the growth in large building fires. This is a specialized field that...
-
Adhesive Bond Strength Calculation of Reinforcing Fibers with Polymers by the “Loop” Method
The method of evaluation the adhesion strength for the fiber-polymer bond by pulling out a thread from the adhesion cell formed by a loop tightened...
-
Experimental Behavior of Recycled Aggregate Concrete Filled Steel Tubular Columns
During the modernization or rehabilitation activity, the demolished structural waste causes large soil pollution and unavailability of natural...
-
Raising the Wear Resistance of Chromium-Nickel Steel Surface-Hardened with Titanium Carbide Particles
Electron microscopy and x-ray diffraction analysis are used to study the structure of coatings deposited on steel 12Kh18N9T by non-vacuum electron...
-
Microstructure and Mechanical Properties of Hadfield Steel Matrix Composite Reinforced with Dispersed High Chromium Cast Iron
In this paper, the Hadfield steel matrix composite reinforced with dispersed high chromium cast iron (HCCI) was prepared by using the hot-rolling...
