Search
Search Results
-
Modeling Zirconium Alloys Recrystallization by Full-Field and Mean-Field Approaches
The present article details the results obtained with recrystallization models based upon mean-field or full-field assumptions, respectively. The two...
-
Accelerated Phase-Field Simulations for Static and Dynamic Recrystallization
Due to rapid advances in computational power, various numerical methods have become feasible for simulating complex microstructure evolution...
-
New understanding of static recrystallization from phase-field simulations
Phase-field (PF) simulations have emerged as a powerful tool for understanding recrystallization phenomena. While numerous factors could...
-
Influence of Active Recovery and Initial Microstructures on Metadynamic Recrystallization of 5083 Aluminum Alloy
To study metadynamic recrystallization, hot compression tests were conducted using Thermecmastor-Z thermomechanical simulator equipped with an...
-
On the Issue of Recrystallization Annealing of Dynamo Steel
AbstractThe effect of preliminary high-speed heating before recrystallization annealing of dynamite steel has been studied. The change in...
-
A study on recrystallization behavior and recrystallization texture of high pressure heat-treated Al–Mg alloy
Cold rolling the CC AA 5754 aluminum alloy to different reductions was followed by an hour of annealing at 537 °C under varied pressures. The changes...
-
Processing map and dynamic recrystallization behaviours of 316LN-Mn austenitic stainless steel
The hot deformation behaviours of 316LN-Mn austenitic stainless steel were investigated by uniaxial isothermal compression tests at different...
-
Simulation of Dynamic Recrystallization in 7075 Aluminum Alloy Using Cellular Automaton
The evolution of microstructure during hot deformation is key to achieving good mechanical properties in aluminum alloys. We have developed a...
-
Phenomenon and Cause Analysis of Different Secondary Recrystallization Behaviors in Thin-Gauge Grain-Oriented Silicon Steels
Thin gauge nitrided grain-oriented silicon steel of 0.20 mm thickness and below shows pronounced surface effect during high temperature annealing. It...
-
Specific Features of Stresses Relaxation and Recrystallization of Steel under Laser Heating
The features of plastic relaxation and recrystallization processes of steels of various types with different crystal lattices were studied. It was...
-
On the role of selective nucleation and growth to recrystallization texture development in a Mg–Gd–Zn alloy
One of the main material properties altered by rare earth additions in magnesium alloys is texture, which can be specifically adjusted to enhance...
-
Dual Strengthened Control of Recrystallization Behavior on CVCDE Magnesium Alloy Containing Characteristic Structure
Various characteristic structures in typical magnesium alloys, including dislocation cells, substructures and twins, have an important influence on...
-
Effect of Recrystallization on the Forming Resistance of the Alloy E635 Elements of Fuel Assemblies
AbstractThe effect of the degree of recrystallization on the strength, the plastic properties, and the creep resistance under compression of...
-
Temperature Control During the Process Combination Welding and Rolling for Enabling Full Recrystallization with Homogenized Grain Size Distribution
Welding with an electric arc is mainly used as a joining technology, where a high energy input is required locally for the joining process. Due to...
-
Full Field Grain Size Prediction Considering Precipitates Evolution and Continuous Dynamic Recrystallization with DIGIMU® Solution
In the last ten years, full-field microstructural simulations have proven to be a very interesting tool to better understand and predict grain size...
-
Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy
The equiatomic TiNbZrTaHf alloy was successfully rolled at room temperature with the reduction of ~ 85%. The microstructure and tensile properties...
-
An Integrated Simulation of Multiple-Pass U-10Mo Alloy Hot Rolling and Static Recrystallization
To achieve a desired microstructure and minimize the thickness variation in rolled foils, researchers must understand the effects of foil fabrication...
-
Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study
The magnesium alloy AZ31, which has undergone high-pressure torsion processing, was subjected to in situ annealing microbeam synchrotron high-energy...
-
Recrystallization Behavior of the New Ni–Co-Based Superalloy with Fusion Structure Produced by Electron Beam Smelting Layered Solidification Technology
The new Ni–Co-based superalloy featuring a "fusion structure" was produced utilizing electron beam smelting layered solidification technology (EBSL)....
-
Prevalence of Heteroepitaxial Recrystallization in the Low Solvus High Refractory (LSHR) γ–γ′ Superalloy
Heteroepitaxial recrystallization (HeRX) is a recently discovered recrystallization mechanism that can occur during thermomechanical processing of...
