Search
Search Results
-
Effect of Heating Atmosphere Composition and Content on Phase and Morphology Distribution of Copper Oxide Layer
When a copper billet is heated in the rolling reheating furnace, certain oxides that affect the surface quality may persist on the substrate. This...
-
Coagulation and crystallinity in Sn (II, IV) oxide as an electron transfer layer
Stannic oxide (SnO 2 ) synthesized by the sol–gel method showed efficient optoelectronic mobility due to high crystallinity and coagulation involved in...
-
Effect of Aluminum by Magnetron Sputtering on the Micro-Arc Oxide Film Layer of Titanium Alloy
In order to study the effect of magnetron sputtering Al coating on the performance of micro-arc oxidation film, a layer of pure aluminum coating was...
-
Synergistic Effect of B and Y Micro-alloying on Oxide-Layer Formation on the Super-austenitic S31254 Stainless Steel
Aiming to address the Mo volatilization problem of super-austenitic stainless steel at high temperature, the S31254 steel containing B and rare earth...
-
Enhancing dielectric passivation on monolayer WS2 via a sacrificial graphene oxide seeding layer
The full utilization of two-dimensional transition metal dichalcogenides (2D TMDCs) faces several challenges, among which is realizing uniform...
-
Effect of Hf-Doped MCrAlY Alloy on the Structure and Properties of Thermally Grown Oxide Layer
The NiCoCrAlY and NiCoCrAlYHf bond layer alloy was prepared by vacuum melting, followed by the deposition of a ZrO 2 -7%Y 2 O 3 (7YSZ) ceramic coating on...
-
Isolation of current–voltage characteristics for each layer of a two-layer dielectric using the example of Al–Al2O3–Ta2O5–Ni diodes with different tantalum oxide thicknesses
The metal–insulator–metal diodes have been investigated in which the dielectric consists of two layers: tantalum oxide and alumina, and alumina...
-
Growth behavior and insulation property of the oxide layer during micro-arc oxidation of aluminium in “soft” regime condition
In this work, micro-arc oxidation was applied to fabricate a high voltage resistance Al 2 O 3 -based ceramic coating on the surface of aluminum alloy....
-
The Effects of Oxide Layer on the Joining Performance of CuZr Metallic Glasses
Using molecular dynamics (MD) simulation, the pressure bonding of Cu 54 Zr 46 metallic glass (MG) was performed under the introduction of an oxygen...
-
Investigating the Reliability of a Negative Capacitance Field Effect Transistor Regarding the Electric Field Across the Oxide Layer
The observation of room temperature sub-60 mV/dec subthreshold slope in MOSFET with ferroelectric layers in the gate stacks has attracted much...
-
Modifying the native aluminum oxide layer by simple methods for fabricating write-once-read-many memory devices
In this work, we have fabricated write-once-read-many (WORM) memory devices based on the modification of the native aluminum oxide (AlOx) layer of...
-
Investigation of the Stability and the Transparency of Oxide Thin Film Transistor with bi-Layer Channels and Oxide/Metal/Oxide Multilayer Source/Drain Electrodes
An amorphous oxide thin-film transistor (TFT) is designed with a bi-layer channel of SiInZnO/SiZnSnO (SIZO/SZTO). In the bi-layer structure, the...
-
The potential of nano graphene oxide and chlorhexidine composite membranes for use as a surface layer in functionally graded membranes for periodontal lesions
Membranes have been used for treating periodontal defects and play a crucial role in guided bone regeneration applications. Nano graphene oxide have...
-
Ultrafast photoresponse in ultraviolet detectors based on zinc oxide nanorods: the effect of a graphene cap** layer
This study investigated the influence of the graphene layer on the speed of light detection of ZnO-based photodetectors. Due to their elevated...
-
A generalized synthesis method for freestanding multiferroic two-dimensional layered supercell oxide films via a sacrificial buffer layer
Multiferroics are an intriguing family of materials due to the simultaneous presence of two ferroic orderings, namely, ferroelectricity and...
-
Theoretical study on tin oxide surface chemistry mechanism and thermodynamic properties for atomic layer deposition equipment optimization
In order to obtain the reaction mechanism and thermodynamic parameters on tin oxide surface chemistry, which provide theoretical data for atomic...
-
Effect of Particle and Substrate Pre-heating on the Oxide Layer and Material Jet Formation in Solid-State Spray Deposition: A Numerical Study
In a solid-state deposition technique such as cold spray (CS) or high-velocity air-fuel (HVAF), particle and substrate initial conditions play a...
-
Anticorrosive properties of the double-layer PANI-(graphene oxide)/epoxy coating in protecting carbon steel in saltwater
The work reports result in improving the anticorrosive properties of a commercial epoxy coating by forming a double-layer coating structure. First, a...
-
Molecular sieving through 'layer-by-layer' self-assembly of polyelectrolytes and highly crosslinked graphene oxide
Lack of access to potable water and abating levels of ground water level demands the reuse of unconventional water sources after remediating it in a...
-
Diffusion-assisted metallic invasion into graphene oxide layer in metal/graphene oxide/metal structures
Diffusion of metallic content into graphene oxide (GO) thin film layers prepared over metallic surfaces is demonstrated in GO/metal ( M 1 = ITO, Al,...