Search

Search Results

1. Effect of Mold Cooling Intensity on the Depression-Type Crack Formation and Mold Flux Infiltration During Continuous Casting Process

   As one of the most serious defects in the products of continuous casting steel, the surface depressions with longitudinal cracks originated from the...

   Fengkang Wang, Hang He, ... Jie Zeng in Metallurgical and Materials Transactions B

   Article 15 September 2023
   

2. Study on Conductivity of Molten Mold Flux

   To investigate the effect of electromagnetic field on molten mold fluxMolten mold fluxes, the electrical conductivityElectrical conductivity of the...

   Yijia Wang, Mingxing Wang, ... Fushen Li in Characterization of Minerals, Metals, and Materials 2023

   Conference paper 2023
   

3. Determination of Time-Spatial Varying Mold Heat Flux During Continuous Casting from Fast Response Thermocouples

   To ensure accurate estimation of mold heat flux, this study investigated the impacts of the thermocouples placement inserted in the mold wall, the...

   Haihui Zhang, Pengcheng **ao in Metallurgical and Materials Transactions B

   Article 02 October 2023
   

4. Effect of Shape Parameters on the Melting Behavior of Hollow Granular Mold Flux for Continuous Casting

   Hollow granular mold flux is an essential functional material in the continuous casting process, and its melting behavior significantly influences...

   Fuhang Chen, Guanghua Wen, ... Haoyan Yang in Metallurgical and Materials Transactions B

   Article 29 September 2023
   

5. Catalytic Effect of Iron Oxide on the Combustion of Carbonaceous Materials in Mold Flux for Continuous Casting

   The reverse gradient distributions of temperature and oxygen concentration in the three-layers structure of mold flux at the upper part of the...

   Funian Han, Guanghua Wen, ... Fuhang Chen in Metallurgical and Materials Transactions B

   Article 26 July 2023
   

6. Simulation of the Effect of Flux Layer Thickness on the Melting Behavior of Mold Fluxes Based on the Copper Bath Method

   Hollow granular mold flux is an essential functional material in the continuous casting process, and its melting behavior significantly influences...

   Fuhang Chen, Guanghua Wen, ... Zibing Hou in Metallurgical and Materials Transactions B

   Article 07 June 2024
   

7. Investigation on Carbonizing From Mold Flux into Ultra-low-Carbon Steel During Continuous Casting

   Carbonizing phenomena from carbon-containing mold flux into ultra-low-carbon liquid steel have always been one of the important factors affecting...

   Qian Long, Wanlin Wang, Kun Dou in Metallurgical and Materials Transactions B

   Article 23 November 2022
   

8. Mathematical Modeling of Mold Flow Field and Mold Flux Entrainment Assisted With High-Temperature Quantitative Velocity Measurement and Water Modeling

   In the present study, the high-temperature quantitative measurement of velocity near the mold surface, water modeling, and numerical simulation were...

   Yi-Bo Liu, Jian Yang, Zhi-Qing Lin in Metallurgical and Materials Transactions B

   Article 07 May 2022
   

9. Measurement and Calculation of Magnetic Flux Density During Mold Electromagnetic Stirring on a Continuous Casting Bloom Mold

   In the current study, a three-dimensional measurement of the magnetic flux density was performed for a 280 mm width × 250 mm thickness continuous...

   Qilan Li, Zhen Zhao, ... Lifeng Zhang in Metallurgical and Materials Transactions B

   Article 31 May 2022
   

10. Thermophysical Characteristics of Mold Flux Bulk Layer for Continuous Casting of Steel

    Abstract—

    One of the functions of the mold flux (MF) for continuous casting of steel is to reduce heat losses during the casting process. The...

    K. N. Anisimov, I. A. Krasnyanskaya, ... V. S. Kulikov in Steel in Translation

    Article 01 December 2022
    

11. Influence of substituting B₂O₃ with Li₂O on the viscosity, structure and crystalline phase of low-reactivity mold flux

    The low-reactivity mold flux with low SiO ₂ content is considered suitable for the continuous casting of high-aluminum steel since it can...

    Rongzhen Mo, Xubin Zhang, ... Lifeng Zhang in International Journal of Minerals, Metallurgy and Materials

    Article 13 May 2023

12. Effect of MgO on Crystallization Properties of Mold Flux for Ultra-wide Slab Peritectic Steel

    Controlling the heat flux at meniscus is one of the key aspects to prevent the formation of cracks during the continuous casting of crack-sensitive...

    Gang Li, Qiangqiang Wang, ... Xubin Zhang in Materials Processing Fundamentals 2024

    Conference paper 2024
    

13. Study on the Magnetocaloric Effect of Molten Mold Flux Under Low-Frequency Electromagnetic Field

    Numerical simulation was used to study the magneto-Joule heating effect of molten mold fluxMolten mold fluxes under a low-frequency electromagnetic...

    Yijia Wang, Bo Bai, ... Fushen Li in Characterization of Minerals, Metals, and Materials 2023

    Conference paper 2023
    

14. In Situ Method to Study the Dissolution of Ti(C,N) Inclusion in Molten Mold Flux

    Mold fluxMold flux plays a critical role in absorbing the inclusions floating from the liquid steel. However, this dissolution process is hard to...

    Li Zhang, Wanlin Wang, ... Xu Gao in Characterization of Minerals, Metals, and Materials 2024

    Conference paper 2024
    

15. Study on the Influence of Low-Frequency Electromagnetic Field on the Absorption Rate of Al2O3 Inclusion in Low Reactivity Mold Flux

    With the wide application of electromagnetic stirring in continuous casting and the rapid development of low reactive mold fluxMold flux, the effect...

    Bo Bai, Yu Wang, ... Zhaolin Ding in Materials Processing Fundamentals 2024

    Conference paper 2024
    

16. Modeling of Flux Reaction and Mixing in Continuous Casting Mold of Medium Mn Steel

    The interfacial reaction between molten steel and mold flux causes MnO accumulation and SiO ₂ reduction in the mold flux during the continuous casting...

    Jie Yang, Linjie Wang, ... **min Zang in Metallurgical and Materials Transactions B

    Article 25 February 2022
    

17. Controlling Step Variation in the Reaction of High-Al Steel and CaO-SiO₂-Type Mold Flux

    The fluid flow, species transport, and chemical reaction of high-Al steel and mold flux are simulated by a numerical model. The reactants on the...

    Dongbin Jiang, Xueling Yu in Metallurgical and Materials Transactions B

    Article 07 February 2024
    

18. Dissolution of TiO₂ and TiN inclusions in CaO–SiO₂–B₂O₃-based fluorine-free mold flux

    Mold flux serves the crucial metallurgical function of absorbing inclusions, directly impacting the smoothness of the casting process as well as the...

    Dawei Cai, Li Zhang, ... Il Sohn in International Journal of Minerals, Metallurgy and Materials

    Article 25 August 2023

19. Mold Simulator Study of Lubrication Behavior of High Carbon Steel Slag Film Inside Continuous Casting Mold

    During the continuous castingContinuous casting of high carbon steelCarbon steel, mold sticking breakout occurs frequently, which may be due to poor...

    Zichao Wang, Wanlin Wang, ... Jie Zeng in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2024
    

20. Study of the Assimilation of Inclusions in Molten Mold Flux Under the Action of Low-Frequency Electromagnetic Fields

    Based on the slag ion structure theory and electromagnetic field theory, an experimental slag electromagnetic fieldLow-frequency electromagnetic...

    Fushen Li, Mingxing Wang, ... Jian Kang in TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2023