Search
Search Results
-
Enhancement of Lubricant Replenishment Under Limited Lubricant Supply in Rolling Bearings
This paper proposes a stripe-shaped surface pattern, aiming to enhance oil replenishment in rolling bearings that operate in challenging conditions...
-
Influence of the Bio-lubricant Along with Nano Compounds as Additives on the Properties of the Lubricant
Lubricant oils play a vital role in all areas with the purpose of reducing wear, smooth functioning of the system, reducing cutting temperature,... -
Bio-bearings: Numerical Model of the Solid Lubricant in the Leg Joints of Insects
The proposed model describes the behavior of the lubricant particles at the interface between two surfaces for a group of cylindrical semi-solid...
-
Nanofillers in Oil, Lubricant, and Fuel Industry
Scientific tribology is the study of the administration and control of friction, wear, and lubrication. As a consequence, it is everywhere, from... -
Tribological Characteristics of a Plastic Lubricant Based on Grease and a Polyurea Thickener
Abstract —The results of laboratory studies of the tribological characteristics of a new plastic lubricant based on Solidol Zh lubricant and a...
-
Lubricant controlled release silicone fouling release coatings based on mesoporous molecular sieves
Silicone fouling release coatings (FRCs) are biocide-free coatings, and their antifouling performance depends on the nonstick properties and the...
-
Experimental Investigations of Sesame Oil-Based Nano-Lubricant in Four-Stroke SI Engine
In the era of upcoming concerns of environmental issues, the biolubricants developed from renewable sources gather much significance. In the present...
-
Clarification of the Effect of Surface Energy on Tribological Behavior of Two-Phase Lubricant Using Reflectance Spectroscopy and Hydrodynamic Analysis
Recently, a new type of lubricant called two-phase lubricants has been developed to realize a high viscosity index. Two-phase lubricants are mixtures...
-
A Numerical Simulation of PFPE Lubricant Kinetics in HAMR Air Bearing
This report investigates the kinetics of lubricant molecules in the HAMR air bearing to understand the initiation and growth of PFPE contamination on...
-
Simulating the Misting of Lubricant in the Piston Assembly of an Automotive Gasoline Engine: The Effect of Viscosity Modifiers and Other Key Lubricant Components
The presence of lubricant droplets in the gas that flows through the piston assembly and crankcase of an internal combustion engine (generically...
-
The Flow of Lubricant as a Mist in the Piston Assembly and Crankcase of a Fired Gasoline Engine
The tribological performance of the piston assembly of an automotive engine is highly influenced by the complex flow mechanisms that supply lubricant...
-
Icephobicity and electrical assessment of slippery coating impregnated with a stabilized hydroxyl-terminated lubricant for high voltage insulation application
In cold climate conditions, insulators are subjected to ice accretion that could affect their electrical performance and consequently lead to power...
-
Tribological Behavior of 1,8-Diazabicyclo[5.4.0]Undecane-7-Ene–Organophosphoric Acid-Based Protic Ionic Liquids as Lubricant Additives
Ionic liquids have been found abroad application as lubricant additives due to their unique physic properties, as well as the powerful...
-
Experimental Investigation of Lubricant Oil Tribology and Cylinder Liner Wear in a Compression Ignition Engine Fueled with Biodiesel
This research investigates the impact on lubricating oil tribology and cylinder liner wear when used cooking oil-derived biodiesel is utilized as a...
-
Friction and Lubrication of Eye/Lens/Lid Interface: The Effect of Lubricant and Contact Lens Material
Irritation of the eye in the case of contact lens users may imply dry eye syndrome (DES), commonly treated by eye drops. The paper focuses on...
-
-
Wear Evaluation of Poly(vinyl alcohol) Hydrogel by UV Spectrometry and Total Organic Carbon Measurement of Lubricant
We report the wear evaluation of poly(vinyl alcohol) (PVA) hydrogel by measuring the polymer concentration in the lubricant after the sliding test....
-
Study on thermal transport behavior of magnesium oxide (MgO) nanostructures as lubricant additives in vegetable oils
Due to harmful impact of petroleum-based fluids and lubricants on the environment and Mankind, vegetable oil-based fluids with incorporation of...
-
Forming of Spur Gear by Combination of Divided Flow Forging and Slide Motion by Using Liquid Lubricant
To reduce the processing load and improve the filling ratio of the tooth part of spur gear, combining divided flow forging and pulse slide motion... -
Slippery lubricant-infused intertwining superhydrophobic matrix: preparation and enhanced resistance against abiotic corrosion and microbiologically influenced corrosion
The corrosion of carbon steel (CS) is a disastrous threat to artificial engineering in harsh environments, such as underground mines and seawater...