Search
Search Results
-
Cracking Problem During Room Temperature Cold Rolling of Three High Al Low C Ferritic Low Density-Steels
High Al low C ferritic low-density steels exhibit a remarkable reduction in density, around 8 to 15%, compared to conventional steels. However, in...
-
Low cost and low density chloride solid electrolyte for all solid state cathode with high active material ratio
Chloride solid electrolytes (SEs) have attracted widespread attention due to their high room-temperature ionic conductivity and excellent cathode...
-
Strain Rate-Dependent Tensile and Fracture Properties of Low-Carbon Ferritic Low-Density Steels
The study investigated the tensile properties of two low-carbon ferritic low-density steels at strain rates of 1 × 10 −4 s −1 , 1 × 10 −3 s −1 , and 1 × 10 −2...
-
Production of low-density and high-strength paperboards by controlled micro-nano fibrillation of fibers
One of the critical challenges in the fiber-based packaging industry is to produce low-density paperboards with high functionality and attractive...
-
Development of High-Strength Low-Density Steel for Emerging Lightweight Electric Vehicle Technologies
In this present research, cost-effective methods for synthesizing structural materials have been adopted, focusing on low-cost Fe-Mn-Al-Si steel for...
-
Low-Density Steels
Fe–Mn–Al–C steels, previously developed in the 1950s for replacing Fe–Cr–Ni steels as oxidation or corrosion resistance steels or cryogenic...
-
Biogenic silver nanoparticle-coated low density polyethylene film with antibacterial and antioxidant properties
In the present study, silver nanoparticles were biosynthesized using banana ( Musa spp.) peel extract as the reducing agent. The biosynthesized...
-
The effect of C on the mechanical behavior of a low-density high-Mn steel
Low-density steels (FeMnAlC) with an austenitic microstructure were the subject of intense research due to their outstanding combination of high...
-
Multi-scale Calculation-Aided Composition Optimization Design of Low-Density and High-Strength Nickel-Based Superalloy
For nickel-based superalloy, applying machine learning (ML) to process material data can further optimize the alloy composition, efficiently find the...
-
Achieving high energy storage density under low electric field in modified bismuth sodium titanate ceramics
In this work (0.85- x )Na 0.5 Bi 0.5 TiO 3 -0.15NaNbO 3 - x Sr 0.85 Bi 0.1 TiO 3 ceramic system abbreviated as (NBT-NN- x SBT) was prepared through the conventional...
-
Uncovering Microstructure–Property Relationship in Ni-Alloyed Fe–Mn–Al–C Low-Density Steel Treated by Hot-Rolling and Air-Cooling Process
This paper focuses on the relationship between the microstructure and tensile properties of Fe–Mn–Al–C low-density high-strength steel processes by...
-
Fracture in elongational flow of two low-density polyethylene melts
Samples of two commercial low-density polyethylene melts were investigated with respect to their fracture behavior in controlled uniaxial extensional...
-
High energy storage density of conductive filler composites at low electric fields through sandwich design
It is difficult to achieve high energy storage density in a low electric field by blending conductive filler composites. Sandwich structure...
-
Effect of Annealing on Microstructure and Mechanical Behavior of Cold Deformed Low-Density Multi-principal-Element High-Strength Alloys
In this work, the microstructure, and mechanical properties of cold-rolled low-density multi-principal-element Fe-30Mn-10Al-1.57C-2.3Cr-0.3Si-0.6Ti...
-
Microstructure Evolution on the Surface of Fe-20Mn-6Al-0.6C-0.15Si Austenitic Low-Density Steel during Heat Treatment
Microstructure evolution on the surface of Fe-20Mn-6Al-0.6C-0.15Si austenitic low-density steel was studied by comparing with the microstructure at...
-
Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying
A low-density, high-specific surface area, high-strength and large-sized carbon aerogel preparation process is a key technology in the industrial...
-
Evaluation of Johnson–Cook material model parameters for Fe–30Mn–9Al–0.8C low-density steel in metal forming applications
Accurate and consistent constitutive model is required to characterize the material behavior in a variety of thermo-mechanical problems. Herein,...
-
A low-density high-entropy dual-phase alloy with hierarchical structure and exceptional specific yield strength
A high-entropy dual-phase AlTiVCoNi alloy with a low density of ∼6.24 g cm −3 is developed, and it consists of a hierarchical structure, including an...
-
Emerging low-density polyethylene/paraffin wax/aluminum composite as a form-stable phase change thermal interface material
Thermal interface materials (TIMs) play a vital role in the thermal management of electronic devices and can significantly reduce thermal contact...
-
Microstructural and mechanical behavior of austenitic and duplex low-density steels microalloyed with V under aging heat treatment condition
Fe–Mn–Al–C low-density (LD) steels have excellent physical and mechanical properties, allowing wide applications in the automotive, aeronautical, and...
