Search
Search Results
-
Effect of Hot-Pressing Rate on Interface and Bonding Strength of Mg/Al Composite Sheets with Zn Interlayer
In this work, the AZ31/1060 laminated metal composites with Zn interlayer were successfully prepared by hot pressing with a strain of 47% in the...
-
Effects of pin size and of using an interlayer on interface bonding and fatigue strength of AA2024 to Ti6Al4V lap joints made using friction stir welding
A strong effort has continued to optimize friction stir lap welding (FSLW) process and to achieve high strength of dissimilar metal welds. For more...
-
Particle Size Effects of Nano-Ag Films on the Interface Sintered Bonding for Die Attachment
Three nano-Ag films with different particle size distribution were fabricated as die-attach materials by pulsed laser deposition (PLD) using...
-
Diffusion Bonding Process and Interface Performance of 2198 Al-Li Alloy
The diffusion bonding process can take full advantage of 2198 Al-Li alloy to produce high-efficiency integral structures. However, the dense and... -
Effects of Surface Roughness on Interface Bonding Performance for 316H Stainless Steel in Hot-Compression Bonding
The metallurgical bonding quality of bonding joints is affected by the substrate surface state in hot-compression bonding (HCB), and the surface...
-
Tensile Strength and Fracture Morphology of Fe/Al Solid-State Bonding Interface Obtained by Forge Welding: Effect of Oxide Scale and Estimation of the Bond Strength of Each Phase
Recently proposed high-strength iron (Fe)/aluminum (Al) spot-forged joints, in which the thickness of the reaction layer is virtually intermetallic...
-
Influence of Post-Bonding Annealing Treatment on Interface Characteristics of Si-Si Wafer Bonded via Room Temperature Surface Activation
In order to improve the bonding quality of Si-Si wafers, room temperature Si-Si surface-activated bonding based on Mo nano-interlayer and...
-
Interface microstructure regulation and bonding performance of powder metallurgy Al/Mg bimetal with Ni interlayer
Due to its excellent performance of lightweight and high strength, Al/Mg bimetal has high application value in the aerospace field. However, the poor...
-
Microstructural heterogeneity and bonding strength of planar interface formed in additive manufacturing of Al−Mg−Si alloy based on friction and extrusion
Single-pass deposits of 6061 aluminum alloy with a single-layer thickness of 4 mm were fabricated by force-controlled friction- and extrusion-based...
-
Fabrication of AZ31/Mg3Y Composites with Excellent Strength and Plasticity via Accumulated Rolling Bonding and Diffusion Annealing
AZ31/Mg3Y composites with a layer thickness of 100–200 μm were fabricated by accumulated rolling bonding (ARB), which was followed by diffusion...
-
Study on Interface Bonding Behavior and Quality Control of 40Cr/Q345B Bimetallic Ring Blank in Vertical Centrifugal Casting
In this study, the vertical centrifugal casting was used to produce a bimetallic ring blank with an outer layer of 40Cr and an inner layer of Q345B....
-
Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints
The reliable use of ultrasonic metal welding requires a thorough understanding of the relevant bonding mechanisms. This article presents an approach...
-
Cu/Al Dissimilar Cold Spot Forge Welding: Effects of Bonding Temperature and Reduction Ratio on Joint Strength and Reaction Layer Growth
High-strength, high-throughput, direct metallurgical joining of copper/aluminum (Cu/Al) is in high demand for electrodes and other electronic...
-
Interface Bonding Behavior of 2219Al/AZ31B Alloy Bimetallic Ring Blank Subjected to Vertical Centrifugal Casting
The vertical centrifugal casting of 2219Al/AZ31B alloy bimetallic ring blank is performed using ProCAST software. The influence of rotation speed of...
-
Interfacial Bonding Strength and Wear Resistance of TaC-Reinforced Layer Prepared on Bearing Steel Surface by Hot Pressing
To solve the problems of surface wear and fracture of bearing rings, tantalum carbide (TaC)-reinforced layer was prepared on the surface of GCr15...
-
Interface Bonding Mechanism of 2024/6061 Aluminum Alloy Bimetallic Casting Blank Subjected to Isothermal Compression
The present study conducted the isothermal compression of 2024/6061 aluminum alloy bimetallic casting blank using a Gleeble-3500 thermal simulator in...
-
Strong bonding effect and Zn segregation et Al/Fe bimetallic composite interface: A first-principles study
The focus of this first-principles study is to elucidate the interface structure and interactions at the Al/Fe bimetal interface by comparing the...
-
Microstructural Nano-Scale Evolution at Inter-Particles Bonding Interface of Cold-Sprayed Ti6Al4V Deposits During Heat Treatment
The inter-particle bonding (IPB) mechanism of cold-sprayed titanium alloy during heat treatment (HT) is not clear. The interfacial microstructure and...
-
Bonding Interface Evolution Characteristics of Laser Depositing Ti2AlNb Intermetallic Compound on the Near-α Titanium Alloy Plate
Gradient titanium alloys are more conducive to meeting the requirements of large temperature and stress gradients than single homogeneous titanium...
-
Effect of fretting stimulation on the growth and bonding of the active bone–titanium bead coating fixed interface
The loosening of the fixed interface between inactive artificial joint material and human bone seriously affects the rehabilitation of patients after...