Search

Search Results

1. Microstructural and Mechanical Properties of X80 Girth-Welded Joints under Different High-Arc-Energy Welding Conditions

   High-arc-energy welding undoubtedly increases the tendency for both local softening and embrittlement to occur in the coarse-grained heat-affected...

   Shuo Liu, **aocong Yang, ... **njie Di in Journal of Materials Engineering and Performance

   Article 05 July 2024
   

2. High-Superelasticity NiTi Shape Memory Alloy by Directed Energy Deposition-Arc and Solution Heat Treatment

   Directed energy deposition-arc (DED-Arc) technology has the advantages of simple equipment, low manufacturing cost and high deposition rate, while...

   Junyi Ma, Lin Yu, ... Lei Yang in Acta Metallurgica Sinica (English Letters)

   Article 28 January 2024
   

3. Residual Stresses in a Wire and Arc-Directed Energy-Deposited Al–6Cu–Mn (ER2319) Alloy Determined by Energy-Dispersive High-Energy X-ray Diffraction

   In order to enable and promote the adoption of novel material processing technologies, a comprehensive understanding of the residual stresses present...

   T. Klein, P. Spoerk-Erdely, ... G. Abreu Faria in Metallurgical and Materials Transactions A

   Article Open access 05 January 2024
   

4. Optimization of Energy Efficiency of Electric Arc Furnace Steelmaking

   To enhance the production efficiency of electric arc furnaces, conserve energy, and reduce consumption, a study was conducted to analyze the energy...

   A. Xu, R. Zhu, ... R. Zhao in Characterization of Minerals, Metals, and Materials 2024

   Conference paper 2024
   

5. Numerical Simulation of the Interaction Between Arc Plasma and Molten Slag in Electric Arc Furnace for High-Titania Slag Smelting

   The heat of arc plasma is the primary energy source of the electric arc furnace (EAF) for high-titania slag smelting. A unified model of fluid flow,...

   Henan Cui, Tao Li, ... Yulin Zhu in Metallurgical and Materials Transactions B

   Article 28 April 2023
   

6. Probing dimensional consistency during multi-track multi-layer gas metal arc directed energy deposition of aluminium alloys

   The dimensional consistency of multi-track multi-layer parts fabricated by gas metal arc-directed energy deposition is by far the most critical...

   P. K. Chaurasia, B. K. Barik, ... A. De in Welding in the World

   Article 17 January 2024
   

7. Optimizing the Phase Distribution in Arc-Based Direct Energy Deposition of Duplex Stainless Steel

   Gas Metal Arc Welding (GMAW) and Gas Tungsten Arc Welding (GTAW) arc-based Direct Energy Deposition (DED) techniques were employed to generate type...

   H. Z. Attar, J. W. Fellowes, ... D. L. Engelberg in Metallurgical and Materials Transactions A

   Article 28 February 2024
   

8. Printing High-Strength High-Elongation Al4043 Alloy Using UNS A94043 Welding Wires through Wire Arc Additive Manufacturing

   The wire arc additive manufacturing technology with excellent development potential in recent years in the field of huge engineering structures and...

   T. Ramkumar, D. Nathan, ... P. Narayanasamy in Journal of Materials Engineering and Performance

   Article 13 October 2023
   

9. Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process

   15CDV6 is one of the widely used high strength low alloy steels in the applications of aerospace, automotive, and defense components. Welding plays a...

   G. Rajesh Kannan, P. Sathiya, ... M. Umar in Journal of Materials Engineering and Performance

   Article 15 April 2024
   

10. Analysis of Electrical Energy Consumption in a Novel Direct Current Submerged Arc Furnace for Ferrochrome Production

    Submerged arc furnace is a smelting device with high efficiency but huge electricity consumption. A novel structure of direct current (DC) submerged...

    Yang Yu, Baokuan Li, ... Shibo Kuang in Metallurgical and Materials Transactions B

    Article 19 June 2023
    

11. Arc Heat Distribution in Cable-Type Welding Wire Submerged Arc Surfacing

    Abstract

    The cable-type welding wire (CWW) submerged arc surfacing (SAS) is an innovative welding process with the advantages of high efficiency,...

    Yong Chen, **anrui Zhao, ... Yapeng Cai in Physics of Metals and Metallography

    Article 01 December 2023
    

12. Plasma wire arc additive manufacturing and its influence on high-carbon steel substrate properties

    Steels with a high carbon content are considered to be difficult to weld. High carbon equivalent indicates not only problems when joining such steels...

    Matthias Moschinger, Thomas Vauderwange, Norbert Enzinger in Welding in the World

    Article Open access 12 February 2024
    

13. Microstructure and Mechanical Properties of High-Strength Steel 22SiMn2TiB by Pulsed Melt Inert-Gas Welding with Activated Nitrogen Arc

    Strength weakening exists in high-strength steel welds. Most of the researches focus on the composition of welding wire to regulate the weld...

    Cong Li, Haobo Xue, ... Kehong Wang in Journal of Materials Engineering and Performance

    Article 29 September 2023
    

14. Modeling and Energy Efficiency Analysis of the Steelmaking Process in an Electric Arc Furnace

    This paper presents a comprehensive model of an industrial electric arc furnace (EAF) that is based upon several rigorous first-principles submodels...

    Jesús D. Hernández, Luca Onofri, Sebastian Engell in Metallurgical and Materials Transactions B

    Article Open access 16 September 2022
    

15. Effect of liquid nitrogen cryogenic cooling during wire arc directed energy deposition of nickel aluminum bronze

    The effect of liquid nitrogen (LN) cryogenic cooling during gas metal arc directed energy deposition (DED) additive manufacturing (AM) of nickel...

    Alexey Kuprienko, Jacob Stickle, ... Carolin Fink in Welding in the World

    Article 05 February 2024
    

16. Towards real-time monitoring of metal transfer and melt pool temperature field in gas metal arc directed energy deposition

    Large three-dimensional metallic parts can be printed layer-by-layer using gas metal arc directed energy deposition (GMA-DED) process at a high...

    Prashant Kumar Chaurasia, Sven Frithjof Goecke, Amitava De in Welding in the World

    Article 13 May 2023
    

17. Complex heat transfer in a bath under arcs of high-power arc steel-melting furnaces.

    This paper presents examples from the practice of operating arc steel-smelting furnaces (EAFs), verifying the hypothesis on the complex heat exchange...

    A. N. Makarov in Metallurgist

    Article 14 May 2024
    

18. Comparison of fatigue test results of high-strength steel DED-Arc specimens with milled and unmilled surfaces

    Abstract

    The surface characteristics of direct energy deposition (DED)-Arc specimens have been previously explored, revealing the dual effect of the...

    Johanna Müller, Jairan Nafar Dastgerdi, Jonas Hensel in Welding in the World

    Article Open access 31 January 2024
    

19. Influence of Arc Length Correction on Microstructure, Mechanical Properties, and Defect Formation of Wire-Arc Additive Manufactured 5356 Alloy

    Aluminum alloys are widely used in many applications and the wire-arc-based metal additive manufacturing of aluminum alloys, the major challenge is...

    Tagore Kumar Pasupula, V. Jaya Prasad in Journal of Materials Engineering and Performance

    Article 04 March 2024
    

20. Research on Pulsed Triple-Wire Gas Indirect Arc Welding Process Based on Arc Deflection Behavior

    A detailed study of the pulsed triple-wire gas indirect arc (TW-GIA) welding process based on the arc deflection effect was carried out in this...

    Chenghui Hu, **nghua Wang, ... Zhaodong Zhang in Transactions of the Indian Institute of Metals

    Article 30 December 2022