Search
Search Results
-
The Influence of Alloying Elements on Mg Vapor Pressure in Liquid Ternary Aluminum Alloys Studied by Laser-Induced Breakdown Spectroscopy
In-situ laser-induced breakdown spectroscopy (LIBS) was used for measurements on molten aluminum alloys containing 0.6 wt pct magnesium in the melt...
-
Revisiting Wagner’s Criteria to Predict Establishment and Retention of Alumina Scales on Ternary NiCrAl Alloys
Despite the advent of numerical modeling approaches and high-performance computing infrastructure, the design and development of corrosion-resistant...
-
Computational discovery of ultra-strong, stable, and lightweight refractory multi-principal element alloys. Part II: comprehensive ternary design and validation
Here the discovery of refractory multi-principal element alloys (MPEAs) with high-temperature strength and stability is pursued within a constrained...
-
An Odyssey from High Entropy Alloys to Complex Concentrated Alloys
High entropy alloys are multiprincipal multi-element alloys (MPEAs) that have been discovered serendipitously like most other alloy discoveries in... -
A study of the physical properties of GaN, GaP and their mixed ternary alloys for the applications in optoelectronics devices
In this study, for the concentrations of x =0.0, 0.25, 0.5, 0.75 and 1.0, the calculations of the physical properties of GaP 1– x N x mixed alloys are...
-
Scandium in Commercial Wrought Aluminum Alloys
This chapter reviews commercial applications for scandium (Sc)-containing wrought aluminum (Al) alloys. Advantages from alloying Sc with aluminum Al... -
Mining of lattice distortion, strength, and intrinsic ductility of refractory high entropy alloys
Severe lattice distortion is a prominent feature of high-entropy alloys (HEAs) considered a reason for many of those alloys’ properties....
-
Effect of Compositional Variation on the Microstructural Evolution and the Castability of Al–Mg–Si Ternary Alloys
This study examined the microstructural evolution and castability of Al–Mg–Si ternary alloys with varying Si contents. Al–6Mg–xSi alloys (where x = 0,...
-
Second Phase Particles in Zr–Sn–Nb–Fe Alloys: A Review
AbstractIn the Zr–Sn–Nb–Fe quaternary alloys, the nature and evolution of the second phase particles (SPPs) is critical to the performance of the...
-
Models of dislocation glide and strengthening mechanisms in bcc complex concentrated alloys
The mechanical response of complex concentrated alloys (CCAs) deviates from that of their pure and dilute counterparts due to the introduction of a...
-
Linear evolution of the γ′-(Ni, Cu)3Al phase composition in Cu-based high-temperature alloys
The ordered γ′-(Ni, Cu) 3 Al is a crucial strengthening phase that improves the high-temperature resistance of Cu-based alloys, so it is important to...
-
Screw vs. edge dislocation strengthening in body-centered-cubic high entropy alloys and implications for guided alloy design
Body-centered-cubic (BCC) high entropy alloys (HEAs) can show exceptionally high strength up to high temperatures. Mechanistic theories are needed to...
-
Oxidation Study of Al–Mg Alloys in Furnace Atmospheres Using Hydrogen and Methane as Fuel
By switching from fossil to hydrogenHydrogen fuel in melting furnaces, the CO2 footprint of a cast houseCast house in the aluminiumAluminium industry... -
Thermodynamic Properties Prediction of Fe–Al–Ti Alloys Based on Atom and Molecule Coexistence Theory
AbstractThe thermodynamic properties for the full composition range of liquid Fe–Ti alloys were determined using the atom and molecule coexistence...
-
Refinement Mechanism of Microstructure of Undercooled Nickel Based Alloys
Through the use of purification and recirculation superheating techniques on molten glass, the Ni65Cu33Co2 alloy was successfully undercooled to a...
-
Phase Equilibria and Melting of Aluminum-Rich Al-Nd-Ti Alloys
The aluminum-rich portion of the Al-Nd-Ti system was investigated experimentally with a focus on solid–liquid phase equilibria. Thermal analysis,...
-
Ternary Interdiffusion Analysis in β-(Ni,Pt)Al System Pertaining to Bond Coat Applications
Interdiffusion study was carried out in β -(Ni,Pt)Al system at 1100 °C by solid–solid diffusion couple technique. Using Kirkaldy’s approach, ternary...
-
Breakdown Trade-Off Relation of Mechanical Properties via Micro-alloying in Mg–Mn Alloys
The impact of micro-alloying on tensile behavior at strain rates in various ranges is examined using five types of extruded Mg-0.3 at. pct Mn–0.1 at....
-
-
Solid State Reduction Driven Synthesis of Mn Containing Multi-principal Component Alloys
In recent years, high entropy alloys (HEAs), also known as multi-principal component alloys (MPCAs) have emerged as a new and exciting class of...