Search
Search Results
-
Recrystallization of a 2.8 wt% Si Non-oriented Electrical Steel After Skew Cold Rolling at Different Angles to the Hot Rolling Direction
The magnetic properties of non-oriented electrical steelNon-oriented electrical steel (NOES) are closely related to the final...
-
Ways to improve the processes of longitudinal rolling on a pipe rolling plant with a plug mill to reduce metal consumption and increase production output
The paper describes the results of implementing modified designs of the working tools of a plug rolling mill. The plug design is modified to improve...
-
Asymmetrical Rolling of Aluminum Alloy 6061
Aluminum alloy 6061 is a good candidate for automotive sheet components due to its good mechanical properties. However, its formability is low when...
-
Investigations on Warm Rolling and Post-Rolling Aging of 7075 Alloy
AbstractThe effect of warm rolling and three aging treatments on microstructure and mechanical properties of 7075 alloy was investigated via optical...
-
Lateral Spread in Industrial Hot Rolling Processes
The lateral deformation in hot rolling has been investigated with finite element method for different geometries of billets, temperature gradients...
-
Asperity Forming Using Printed Tools in Rolling
The new method of asperity forming using plastic film with fine pattern produced by laser printer as a tool was proposed in the previous report. This...
-
Enhancing the mechanical and magnetic properties for low magnetic stainless-steel plates by non-recrystallization hot rolling and solution treatment
Develo** low magnetic stainless-steel plates with high yield strength while ensuring good plasticity, corrosion resistance, and paramagnetism is a...
-
Microstructure, Texture Evolution, and Mechanical Properties of Thin AZ31B Mg Alloy Sheets Prepared by Two-Stage Rolling
Magnesium (Mg) sheets that are thinner than 1 mm show significant advantages in the fabrication of shells of electronic equipment, as they are...
-
Hot Rolling of Thin-Wall Ductile Cast Iron Produced by Ablation Casting
This study aims at investigating the possibility of rolling and increasing both the tensile strength and the elongation of thin-wall non-alloy...
-
Simulations of Texture Evolution in the Near-Surface Region During Aluminum Rolling
Prediction of texture changes during cold rolling is important because they affect the recrystallization and anisotropy of an aluminum sheet during...
-
Effects of Working Temperature on Microstructure and Hardness of Ti-6Al-4V Alloy Subjected to Asymmetrical Rolling
In the present study, the microstructural evolution alongside its microhardness evaluation has been emphasized for Ti-6Al-4V alloy sheets subjected...
-
Microstructure Evolution and Property of Spray-Formed Cu-10 wt% Fe Alloy During Cold Rolling
In order to obtain homogeneity and fine-scale microstructure of Cu–Fe alloy, a Cu-10 wt% Fe alloy slab was prepared by spray forming. The effects of...
-
Effect of Rolling Pass on Porosity Void Closure of Bloom during Hot-Core Heavy Reduction Rolling
Some heavy reduction technologies near the solidification end have been gradually applied to casting slabs or blooms in recent years to eliminate...
-
Computing Sheet Rolling Instabilities with a Shell Finite Element Model
In this paper a novel model for 3D finite element sheet metal rolling calculations is presented. A global model which represents the behavior and...
-
Rolling Bearing Fault Diagnosis Based on Multi-source Information Fusion
Addressing the issues that single-source information cannot comprehensively reflect the operational status of equipment, redundant features fail to...
-
Effects of Hot Rolling Finishing Temperature on Texture, Formability, and Surface Ridging of Sn Microalloyed Ferritic Stainless Steel
In order to enhance the formability and ridging resistance of Sn microalloyed ferritic stainless steel (FSS), an investigation was conducted on the...
-
Fatigue life improvement of similar and dissimilar aluminum friction stir welds by deep rolling
At the moment, high production costs prevent the friction stir welding (FSW) process from further industrial applications even if comparable high...
-
Significant Texture Weakening of AZ91 Alloy by Asymmetric Hot Rolling
The asymmetric hot rolling was applied to the as-cast AZ91 alloy to weaken the texture. It was found that the {0001} basal slip was not favored...
-
Cracking Problem During Room Temperature Cold Rolling of Three High Al Low C Ferritic Low Density-Steels
High Al low C ferritic low-density steels exhibit a remarkable reduction in density, around 8 to 15%, compared to conventional steels. However, in...
-
Using the radial shear rolling method for deep development of the cast structure of ingots of special materials
The behavior of the steel structure of cast ingot during rolling at the radial rolling mill RSP-10/30 was studied. The ingots for rolling were...
