Search
Search Results
-
An Analysis of Stresses in a Continuously Cast Billet During Steel Casting Into a Cylindrical Mold with a Two-Circuit Cooling System
The paper considers stresses emerging in the skin of a continuously cast steel billet, as well as their values under the influence of temperature...
-
Investigation and Calculating of Shrinkage in a Billet Continuously Cast on a Slab Caster
A method for calculating the linear shrinkage of a slab during its formation on a continuous casting machines (CCM) production line is presented. By...
-
New Technological and Design Solutions for Devices for Producing a Continuously Cast Deformed Billet
The article discusses four new design solutions for a vertical type casting and forging module. In the first proposed design, on each inclined wall...
-
Effect of screw piercing on the structure and mechanical properties of a continuously cast blank made of wheel steel
In this paper, the results of the study on the deformation effect by the screw piercing method on the mechanical properties and macrostructure of...
-
Influence of the Process Conditions of Continuous Casting of Steel on the Macrostructural Quality of a Continuously Cast Round Billet for the Production of Railroad Wheels and Axles of Locomotives
Work was carried out to improve the macrostructural quality of a continuously cast round billet for solid-rolled railroad wheels and axles of...
-
Production of Steel 26KHMFBA Continuously-Cast Billets for Casing Pipes Using Barium-Containing Master Alloy
Results are provided for a study showing the effect of Ca- and Ba-containing master alloys on composition and contamination with non-metallic...
-
Special Features of the Structure and Properties of Continuously Cast Billet from Steel R6M5
The structure, phase composition and impact toughness of specimens cut from different-thickness regions of a billet with cross section 160 × 160 mm...
-
Features of the Distribution of Nonmetallic Inclusions in Continuously Cast Billets Made of Sulfur-Containing Steel C45E
AbstractThe features of the distribution of nonmetallic inclusions (NIs) along the cross-section of the 360 × 360-mm continuous cast billet (CCB)...
-
Production of High-Quality Wheel Steel. Part 1. Production Aspects of Continuously-Cast Billet Quality for Railway Wheel Manufacture
Main parameters of secondary refinement and continuous casting for 400 mm wheel steel billets of grade 2 (GOST 10791–2011) manufactured by AO TAGMET...
-
Rational Distribution of Surface Cooling Intensity for a Round Continuously-Cast Billet in Secondary Cooling Zone
A method for determining the rational distribution of cooling intensity of a round billet in a SCZ within which the amount of heat removed from the...
-
Preparation of Continuously Cast Highly-Alloyed Steel Slab Billets
A description is provided for a new patented design of a slab crystallizer and its cooling system with calculation results and identified...
-
Numerical Simulation of Solidification Structure of Continuously Cast Billet with Grain Motion
The motion of free grains has a significant influence on the solidification structure, solute distribution, and defects of large casts. However, few...
-
Understanding Partitioning and Segregation of Boron in Continuously Cast Slabs of 27MnB5 Steel
Trace addition of boron at approximate 40 ppm can have a significant effect on strength of steels. This research addresses B distribution in a...
-
The Features of Segregation Level Distribution for Chemical Elements in a Continuously Cast Slab
AbstractGeneralization results for experimental data obtained by different authors in the studies on carbon, sulfur and phosphorus concentration...
-
Evaluation of the Efficiency of Soft Reduction of Continuously Cast Billets at the Thin-Slab Continuous Casting Machine of Vyksa Steel Works JSC
AbstractImprovement of macrostructure indicators of slabs during continuous casting of steel on a thin-slab machine of the sheet-rolling shop of...
-
Prediction on the Composition Distribution of Oxide Inclusions in a Tire Cord Steel Billet Using an Integrated Model
An integrated model was proposed in the current study to predict the composition distribution of inclusions along the thickness of a tire cord steel...
-
Using the radial shear rolling method for deep development of the cast structure of ingots of special materials
The behavior of the steel structure of cast ingot during rolling at the radial rolling mill RSP-10/30 was studied. The ingots for rolling were...
-
Directions for Reducing Chemical Heterogeneity of Continually Cast Pipe Blank
AbstractAs a result of studying the heredity of the relationship between the chemical heterogeneity of seamless pipes and continuously cast billets,...
-
Investigation of Corner Cracks in Continuous Casting Billet Using Thermomechanical Model and Plant Measurements
AbstractA coupled thermofluidic-mechanical model has been developed to analyse the thermomechanical state of the solidifying shell in a continuously...
-
Influence of Cast Structure Parameters on Ductility Properties of Low-Carbon Microalloyed Steels
On the example of industrial continuously-cast slabs 355 mm thick of two steels of different chemical compositions recommended for the production of...
