Search

Search Results

1. Effects of UV on the Corrosion Behavior of Pure Aluminum 1060 in Simulated Nansha Marine Atmosphere

   The corrosion behavior of pure aluminum 1060 subjected to a wet-dry cyclic accelerated test in simulated Nansha marine atmosphere in the dark and...

   Can Peng, Mingxiao Guo, ... Cheng Sun in Acta Metallurgica Sinica (English Letters)

   Article 16 November 2021
   

2. Study on the Influence of Prefabricated Aluminum Layer Technology on the Properties of Corrugated Interface Steel/Aluminum/Aluminum Alloy Composite Panel

   The thick gauge steel/aluminum/aluminum alloy composite panel is crucial for marine steel-aluminum transition joints and is extensively used in...

   Wenwen Liu, Na** Wang, ... Zhongyu Chen in Journal of Materials Engineering and Performance

   Article 09 May 2024
   

3. Large-Scale Heterogeneity and Long-Term Relaxation in Aluminum–REM Melts

   Abstract

   The long-term relaxation of large-scale heterogeneities in aluminum–rare earth metal (REM) melts with a REM content of 5–10 at % was observed...

   D. A. Yagodin, L. D. Son in Russian Metallurgy (Metally)

   Article 01 August 2023
   

4. A Study of the Microstructure, Texture and Tensile Properties of 1060/Al-TiC/1060 Sandwich Composites Prepared by Hot-Roll Bonding

   Microstructure and texture development in Al/AMCs sandwich composites and the connection between the tensile properties and microstructure/texture...

   Z. J. Wang, S. Liu, ... W. C. Liu in Metallurgical and Materials Transactions A

   Article 23 October 2020
   

5. Heterogeneous microstructural characteristics of aluminum-addition friction stir-processed Al_0.1CoCrFeNi alloy with strength–ductility synergy

   The strength–ductility trade-off is evident for Al _x CoCrFeNi high-entropy alloy (HEA), and the synergistic improvement of its strength and ductility...

   Huijie Zhang, Kang Ma, ... Luyu Yu in Journal of Materials Science

   Article 14 October 2022
   

6. Aluminum foam production, properties, and applications: a review

   Aluminum foams have emerged as a remarkable engineering material, exhibiting exceptional structural performance and many excellent properties. This...

   Nikunj Patel, Gaurav Mittal, ... Ajaya Kumar Pradhan in International Journal of Metalcasting

   Article 18 October 2023
   

7. Superplasticity of High-Strength Submicrocrystalline Al–0.5Mg–Sc Aluminum Alloys

   Abstract

   The effect of scandium on the superplasticity characteristics of Al–0.5Mg–Sc conductor aluminum alloys with a submicrocrystalline (SMC)...

   V. N. Chuvil’deev, M. Yu. Gryaznov, ... O. E. Pirozhnikova in Russian Metallurgy (Metally)

   Article 27 September 2021
   

8. Development of aluminum matrix composites through accumulative roll bonding: a review

   Accumulative roll bonding (ARB) is a severe plastic deformation technique commonly applied to produce ultrafine grain materials. ARB has evolved as a...

   K. R. Ramkumar, Isaac Dinaharan, ... Hyoung Seop Kim in Journal of Materials Science

   Article 27 May 2024
   

9. Investigation of the Effects of Overlap** Passes on Friction Stir Processed Aluminum Alloy 5083

   The effect of the number of passes during friction stir processing on the structure and properties of the surface layers of aluminum alloy 5083 is...

   Lokesh Singh, Mazin Mahmood Yahya, ... Kahtan A. Mohammed in Metal Science and Heat Treatment

   Article 01 November 2023
   

10. Fabrication of intelligent anticorrosion waterborne aluminum pigments based on encapsulation of composited zeolitic imidazole framework layers

    In this paper, the waterborne aluminum pigments with intelligent anticorrosion properties and bright colors were prepared by encapsulating...

    Yezhen Chen, **aoshuang Li, ... Mei Yan in Journal of Materials Science

    Article 24 April 2023
    

11. Ceramic Coatings Based on Chromium and Aluminum Nitrides Obtained by Vacuum-Arc Plasma-Assisted Evaporation

    Abstract —

    The results of studying multilayer CrN/AlN coatings obtained by vacuum-arc plasma-assisted evaporation at different speeds of rotation of...

    A. A. Leonov, Yu. A. Denisova, ... A. N. Shmakov in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

    Article 01 December 2023
    

12. Study on Microstructure and Mechanical Properties of Aluminum–Copper Dissimilar Metals Joints by Nanosecond Laser Spiral Welding

    Aluminum–copper dissimilar metals were successfully welded by nanosecond laser and optical galvanometer scanning. The joint formation, microstructure...

    Qiran Cheng, Peilei Zhang, ... Zhishui Yu in Transactions of the Indian Institute of Metals

    Article 19 May 2022
    

13. Influence of different surface conditions on mechanical properties during ultrasonic welding of aluminum wire strands and copper terminals

    Ultrasonic metal welding (USMW) has become considerable attention in terms of its suitable applications compared to conventional fusion welding...

    Pascal Pöthig, Michael Grätzel, Jean Pierre Bergmann in Welding in the World

    Article Open access 10 February 2023
    

14. Superamphiphobic triple-scale micro-/nanostructured aluminum surfaces with self-cleaning and anti-icing properties

    Due to the construction of complicated micro-/nanohierarchical structures, designing durable superamphiphobic Al surfaces by a simple,...

    Tianchi Chen, Jie Guo, ... Jialu Zhang in Journal of Materials Science

    Article 05 July 2021
    

15. Innovative nanocomposite coating for aluminum alloy: superior corrosion resistance, flame retardancy, and mechanical strength for aerospace applications

    Nanocomposites containing impermeable two-dimensional materials are attracting considerable attention for their ability to shield metals from...

    Joseph Raj Xavier, S. P. Vinodhini, R. Ganesan in Journal of Materials Science

    Article 26 June 2024
    

16. Preparation and Characterization of Superhydrophobic Silane-Based Multilayer Surface Coatings on Aluminum Surface

    A multifunctional composite superhydrophobic coating with anti-corrosion and wear resistance has been fabricated on the surface of the aluminum. The...

    Shuai Wu, Ruomei Wu, ... Qinghua Chen in Journal of Materials Engineering and Performance

    Article 20 January 2022
    

17. Micro-characteristics of High-Entropy Alloy Weld Formed by Friction Stir Lap Welding of 1060 Al and Al_0.1CoCrFeNi

    1060 Al and Al _0.1 CoCrFeNi are friction stir lap welded in this study. The limited flow of high-entropy alloy avoids the occurrences of hook and cold...

    H. J. Zhang, L. Y. Zhao, ... J. L. Song in Transactions of the Indian Institute of Metals

    Article 28 October 2020
    

18. The Microstructure and Mechanical Properties of High-Strength 2319 Aluminum Alloys Fabricated by Wire Double-Pulsed Metal Inert Gas Arc Additive Manufacturing

    Using double-pulsed melt inert-gas welding (DP-MIG)-based wire arc additive manufacturing (WAAM), the 2319 aluminum alloy components were fabricated...

    Zhongli Huang, Jiankang Huang, ... Ding Fan in Journal of Materials Engineering and Performance

    Article 26 August 2022
    

19. Study on the Microstructure and Properties of Graphene Powder-Reinforced Ti-Al Metal-Intermetallic Laminated Composite

    In this work, graphene powder-reinforced Ti-Al metal-intermetallic laminated composite (GPE _P -Ti/Al MIL composite) was designed and fabricated using...

    Enhao Wang, **aoting Qi, ... Chunhuan Guo in Journal of Materials Engineering and Performance

    Article 20 June 2023
    

20. Effect of Uniaxial Pre-strain on Room Temperature Tensile and Creep Behavior of Aluminum Alloy AA2219-T87 for Propellant Tanks of Satellite Launch Vehicles

    In this study, the effect of uniaxial pre-strain in the range of 1-9%, has been studied on room temperature tensile and creep behavior of aluminum...

    P. Manikandan, G. Sudarshan Rao, ... M. Mohan in Journal of Materials Engineering and Performance

    Article 03 January 2023