Search

Search Results

1. As-Sprayed Highly Crystalline Yb₂Si₂O₇ Environmental Barrier Coatings (EBCs) by Atmospheric Plasma Spray (APS)

   High amorphous phase formation tendency, a desirable microstructure and phase composition, as well as silicon evaporation, are the key challenges of...

   Farzam Arhami, Fadhel Ben Ettouil, Christian Moreau in Journal of Thermal Spray Technology

   Article 06 January 2023
   

2. Microstructural, Mechanical, and Tribological Evaluation of Cu-Al-based Coatings Deposited by APS and HVOF

   Thermal-sprayed coatings have been extensively used in aerospace with the main purpose to overcome critical challenges such as abrasive wear,...

   Cyrus Bidmeshki, Andre C. Liberati, ... Pantcho Stoyanov in Journal of Thermal Spray Technology

   Article 02 October 2023
   

3. Surface and Interface Analysis on Plasma Spray Coating on Superalloys at Elevated Temperature

   This research work aims to depict the high temperature behaviour of two different materials at a temperature. For investigations, samples were coated...

   D. Chellaganesh, M. Adam Khan, ... P. M. Mashinini in Recent Advances in Materials Technologies

   Conference paper 2023
   

4. Component Demonstration and Engine Validation of Solution Precursor Plasma Spray (SPPS) Yttrium Aluminum Garnet (YAG) Thermal Barrier Coatings: Part II

   Yttrium aluminum garnet thermal barrier coatings (TBCs) deposited by the solution precursor plasma spray process (SPPS) have been shown to have a...

   Brent Cottom, Rishi Kumar, ... Eric H. Jordan in Journal of Thermal Spray Technology

   Article 14 March 2023
   

5. Comparative Study on the Microstructure and Properties of 304 Stainless Steel Coatings Prepared by High-Velocity Oxygen Fuel Spraying and Air Plasma Spraying

   The 304 stainless steel coatings were applied to a 6061-T6 aluminum alloy substrate using high-velocity oxygen fuel spraying (HVOF) and air plasma...

   Ting Zhang, Wensheng Li, ... Haimin Zhai in Journal of Thermal Spray Technology

   Article 20 May 2024
   

6. Perspectives on Environmental Barrier Coatings (EBCs) Manufactured via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCs): A Tutorial Paper

   There are many sets of information in the literature (e.g., papers, books and websites) about the great achievements that are expected for aerospace...

   Kang N. Lee, Dongming Zhu, Rogerio S. Lima in Journal of Thermal Spray Technology

   Article 01 January 2021
   

7. Surface analysis of yttrium oxyfluoride deposited via air plasma spraying for Erosion resistance against NF₃ plasma

   The plasma-resistant properties of surfaces coated with synthesized and commercial yttrium oxyfluoride materials, respectively, were investigated by...

   R. Kreethi, Yu-** Hwang, ... Kee-Ahn Lee in Journal of the Korean Ceramic Society

   Article 06 October 2023
   

8. Investigation of Corrosion Characteristics of Plasma-Sprayed Composite Coating on Bearing Steel Through Electrochemical and Salt Spray Test

   This paper evaluates corrosion characteristics of a new material combination for a composite coating consisting of compounds Nickel Aluminum (NiAl),...

   K Mohammed Ibrahim, Sourabha S Havaldar, ... R. Keshavamurthy in Journal of Bio- and Tribo-Corrosion

   Article 21 September 2022
   

9. Development of Thermal Spray Alumina Coating for High Diffuse Reflectivity Application in Lambertian Screen

   This study is about material and processes technologies for the realization of diffuse reflective screens supporting high temperatures. The use of...

   Geoffrey Darut, Christophe Verdy, ... Raymond Peiffer in Journal of Thermal Spray Technology

   Article 27 September 2023
   

10. Solid Particle Erosion and Scratch Wear Behavior of NiTi Smart Alloy Modified Mild Steel Using Atmospheric Plasma Spray Technology at Different Substrate Preheating Temperatures

    Solid particle erosion is a severe problem for a machine working in a sandy environment. Due to this service, life of instruments decreases as...

    Rakesh Roshan, Swadhin Kumar Patel, ... Ajit Behera in Journal of Materials Engineering and Performance

    Article 09 August 2023
    

11. Structure Evolution and Corrosion Performance of CoCrFeMnNi High Entropy Alloy Coatings Produced Via Plasma Spray and Cold Spray

    High-entropy alloys (HEAs) such as the Cantor Alloy (equiatomic CoCrFeMnNi) have gained significant interest over the last decade for their unique...

    Jacob Mahaffey, Andrew Vackel, ... Andrew B. Kustas in Journal of Thermal Spray Technology

    Article 05 April 2022
    

12. High-Temperature Wear and Abradable Behaviors of Yb₂Si₂O₇-CaF₂ Composite Coatings Fabricated by Atmospheric Plasma Spray

    Ceramic matrix composites (CMCs) have become important structural materials of aero-engines under elevated operating temperature while the abradable...

    **tao Wang, Du Hong, ... **liang Sun in Journal of Thermal Spray Technology

    Article 23 October 2023
    

13. Effect of laser remelting on microstructure, salt spray corrosion and electrochemical performance of plasma sprayed CoCrFeNiMo HEA coating

    A plasma sprayed CoCrFeNiMo high-entropy alloy coating on Ti6Al4V alloy was processed by laser remelting, and the salt spray corrosion and...

    Liu Zhicheng, He Chuang, Kong Dejun in Journal of Materials Science

    Article 19 June 2023
    

14. Acoustic Emission Sensor-Assisted Process Monitoring of Air Plasma-Sprayed Titanium Deposition

    Acoustic emission is a sensing technique that offers the potential benefit for its use as an in situ monitoring tool for a wide range of...

    V. Viswanathan, Anil Prathuru, ... Saurav Goel in Journal of Thermal Spray Technology

    Article Open access 27 September 2023
    

15. The Microstructural and Chemical Composition Changes in TGO and BC of HALT Pt–Al–APS YSZ Coating After Cyclic Oxidation

    Abstract

    In this research, the microstructural and chemical composition changes of thermally grown oxide (TGO) and bond coat (BC) layer were...

    Arman Rabieifar, M. Reza Afshar, Hamidreza Najafi in Protection of Metals and Physical Chemistry of Surfaces

    Article 02 November 2023
    

16. Erosion of ceramic coating applications under the influence of APS and HVOF methods

    The erosion wear of the thermal barrier coating (TBC) application created by the ceramic topcoat effect on the substrate material and the...

    M. Demirci, M. Bagci in Applied Nanoscience

    Article 02 November 2022
    

17. Impact of Precursor Thermal Decomposition Reactions on YSZ Coatings Deposited with a Low-Power Plasma Torch at Short Spray Distance

    Yttria-stabilized zirconia (YSZ) deposition at short spray distance is of great interest for the aeronautic industry, especially to perform a thermal...

    S. Segondy, C. Rio, ... F. Rousseau in Journal of Thermal Spray Technology

    Article 16 December 2022
    

18. Investigating Atmospheric Pressure Plasma Spray Coating of YPO₄ and its Performance as a Corrosion Barrier Protective Layer Against Molten Uranium

    YPO ₄ qualifies as a strongly effective environmental barrier coating material against highly aggressive corrosive environments like molten uranium...

    S. Bhandari, Y. Chakravarthy, ... S. Ghorui in Journal of Thermal Spray Technology

    Article 10 March 2022
    

19. Effect of Mo Addition and Water Vapor on the High-Temperature Corrosion Performance of APS Ni-Al-based Coatings

    To investigate the influence of Mo addition and water vapor content on the high-temperature corrosion resistance of Ni-Al-based coatings, 0Mo, 5Mo,...

    Duoli Wu, Haotian Wu, ... Chao Zhang in Journal of Thermal Spray Technology

    Article 23 October 2023
    

20. Development of Solution Precursor Plasma Spray (SPPS) Yttrium Aluminum Garnet (YAG) Coatings for Engine Components Using a High Enthalpy Cascaded Arc Gun: Part I

    Solution precursor plasma-sprayed (SPPS) yttrium aluminum garnet (YAG) thermal barrier coatings (TBCs) have previously been shown to have higher...

    Rishi Kumar, Chen Jiang, ... Eric H. Jordan in Journal of Thermal Spray Technology

    Article 21 March 2023