Search

Search Results

1. Enhanced dielectric temperature stability and energy-storage properties of (Y_0.5Nb_0.5)⁴⁺ co-doped (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ lead-free relaxor ceramics

   (Bi _0.5 Na _0.5 ) _0.94 Ba _0.06 Ti _{1− x} (Y _0.5 Nb _0.5 ) _x O ₃ (abbreviated as BNTBT-100 x YN) lead-free relaxor ceramics were designed and prepared using a traditional...

   Han Wang, Qiang Li, ... Huiqing Fan in Journal of Materials Science

   Article 14 June 2021
   

2. Theory of Movement Behavior of Argon Bubbles in Upper Nozzle of Tundish During Argon Blowing Process

   The prevention of nozzle clogging in the tundish upper nozzle through argon blowing has been commonly practiced. However, there is still a lack of...

   Yang Li, Yang Li, ... Deli Chen in Metallurgical and Materials Transactions B

   Article 13 October 2023
   

3. Enhanced Microstructural Stability and Hardness of Multi-component Nanocrystalline Nickel Alloys Processed via Mechanical Alloying

   Nanocrystalline alloys are noteworthy for their high strength, and nanocrystalline Ni is being investigated for high-temperature applications....

   Mari-Therese S. Burton, B. Chad Hornbuckle, ... Martin P. Harmer in Metallurgical and Materials Transactions A

   Article 04 March 2024
   

4. Electrical Characterization in Ultra-Wide Band Gap III-Nitride Heterostructure IMPATT/HEMATT Diodes: A Room-Temperature Sub-Millimeter Wave Power Source

   Fabrication and subsequent on-chip direct current characterization are reported for a vertical-mesa avalanche transit time (ATT) diode. The active...

   Sulagna Chatterjee, Moumita Mukherjee in Journal of Electronic Materials

   Article 14 December 2022
   

5. Carrier Dynamics in III--Nitrides Studied by Time-Resolved Photoluminescence

   Recent results on time-resolved photoluminescence (PL) studies for Al-rich AlGaN alloys, InAlGaN quaternary alloys, InGaN/InAlGaN and GaN/AlN...

   Hongxing Jiang, **gyu Lin in Ultrafast Dynamical Processes in Semiconductors

   Chapter
   

6. Extraction of salt and base metals from geothermal water: Kinetic modeling and mechanism

   Geothermal fluids have the potential as important sources of precious minerals and metals. There are several hydrometallurgical techniques by which...

   Rohit Pawar, Sourav Santara, ... Kriti Yadav in MRS Energy & Sustainability

   Article 10 July 2023
   

7. Quadrupole Ordering and Inverse Magnetocaloric Effect in a Magnet with Biquadratic Exchange and Spin S = 1

   Abstract

   This paper studies the conditions for uniaxial quadrupole ordering and the behavior of this ordering in an external magnetic field in a cubic...

   E. E. Kokorina, M. V. Medvedev in Physics of Metals and Metallography

   Article 01 September 2022
   

8. Barker Code Thermography Inspection and Reliability Evaluation for CFRP Defects Detection

   Abstract

   In this paper, Barker code thermography is used to detect delamination defects incarbon fiber reinforced polymer (CFRP). Detection capability...

   Chiwu Bu, Tao Liu, ... Rui Li in Russian Journal of Nondestructive Testing

   Article 01 October 2023
   

9. Tribological characteristics of WC-Cr₃C₂-Ni cermet coatings under different wear parameters

   The wear-resistant cermet coating of WC-Cr ₃ C ₂ -Ni was deposited via high-velocity air–fuel spraying on the beryllium bronze substrate. The wear...

   Diyao Zhang, Zijun Peng, ... Lei Yuan in Journal of the Australian Ceramic Society

   Article 19 February 2024
   

10. Covalent immobilization of xylanase and lysing complex into polymer scaffolds with long-term activity retention

    Existing antifouling coatings for marine environments rely on the toxicity of copper and small-molecule additives to prevent organism growth. These...

    Ryan W. Baker-Branstetter, Mairead E. Bartlett, ... Reid E. Messersmith in Journal of Coatings Technology and Research

    Article 22 December 2022
    

11. Deep Convolutional Neural Network to Assist Die Design for Flow Balance of Aluminum Hollow Extrusion

    The demand for aluminum alloy extrusion is increasing and the requirements for the accuracy and geometric complexity of extrusion products are...

    Yan-Bo Yu, You-Rui Lai, ... Tat-Tai Truong in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

12. Bayesian optimization with experimental failure for high-throughput materials growth

    A crucial problem in achieving innovative high-throughput materials growth with machine learning, such as Bayesian optimization (BO), and automation...

    Yuki K. Wakabayashi, Takuma Otsuka, ... Hideki Yamamoto in npj Computational Materials

    Article Open access 23 August 2022
    

13. Segmental Search Method for Ultrasonic Inspection of a Wedge Dual-Layer Medium Using Full Matrix Capture

    Abstract

    The development of phased array ultrasonic testing (PAUT) using the total focusing method (TFM) has led to improved quality in the detection...

    Qian Xu, **anming Yang, ... Haitao Wang in Russian Journal of Nondestructive Testing

    Article 01 March 2023
    

14. Synthesis and Characterization of Hollow Strontium Carbonate Pompons by Composite Soft Template Method

    The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene...

    Bibo Li, **ufang Dong, ... Yunfei Liu in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 20 November 2023

15. Improvement of AlN Thermal Conductivity Based on Reductive Compound Additives

    AlN ceramics were prepared by plasma activation sintering (PAS) with compound additives yttrium acetylacetonate (Y(acac) ₃ ) and melamine (C ₃ H ₆ N ₆ ). The...

    Meijuan Li, Chuanyi Wang, ... Qiang Shen in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 01 October 2023

16. Learning from machine learning: the case of band-gap directness in semiconductors

    Having a direct or indirect band gap can influence the potential applications of a semiconductor, for indirect band gap materials are usually not...

    Elton Ogoshi, Mário Popolin-Neto, ... Gustavo M. Dalpian in Discover Materials

    Article Open access 29 February 2024
    

17. A New Anti-fatigue Design Method for Welded Structures Based on Stiffness Coordination Strategy and Its Application

    In order to effectively improve the anti-fatigue performance of welded structures in the design stage, a new anti-fatigue design method of welded...

    Chunliang Niu, Suming **e, Tao Zhang in Fatigue and Fracture of Materials and Structures

    Conference paper 2022
    

18. Influence of Texture on Hall-Petch Slope in Hot-extruded AZ31 Magnesium Alloys

    To study the influence of texture on Hall-Petch slope, the Hall-Petch relationships of two hot-extruded AZ31 alloys (A117 and A189) were determined...

    Ling Wang, Yiquan Zhao, ... Yinong Wang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 01 June 2023

19. Nickelate superconductors get ‘hotter’

    Mingwei Yang, Danfeng Li in Science China Materials

    Article 03 August 2023

20. Gold catalysis in organic synthesis: fifteen years of research in India

    Gold catalysis has emerged as an important tool in the field of synthetic organic chemistry for the selective functionalization of C–C multiple...

    Debasish Mandal, Anil Kumar, Nitin T. Patil in Proceedings of the Indian National Science Academy

    Article 05 September 2022