Search

Search Results

1. Wear Resistance Behavior of 0.06% C Dual-Phase Steel

   The wear resistance behavior of dual-phase steel was examined in dry conditions and compared to plain carbon normalized steel with a similar chemical...

   Satendra Kumar in Transactions of the Indian Institute of Metals

   Article 07 November 2023
   

2. Wear Resistance and Microstructure of Ultra High Molecular Weight Polyethylene During Uniaxial Tension

   The influence of microstructure on wear resistance of prosthetic hip and joint bioimplant material, ultra high molecular weight polyethylene (UHMWPE)...

   Sahitya Movva, Reeshemah K. Burrell, ... Karl I. Jacob in Tribology Letters

   Article 24 November 2023
   

3. Cationic engineered nanodiamonds for efficient antibacterial surface with strong wear resistance

   The spread of diseases caused by bacterial adhesion and immobilization in public places constitutes a serious threat to public health. Prevention of...

   Fu-Kui Li, Wen-Bo Zhao, ... Chong-**n Shan in Nano Research

   Article 25 January 2024
   

4. Wear Resistance of Glow-Discharge Nitride 08Kh18N10 Steel

   The influence of the modes of anhydrous nitriding of 08Kh18N10 steel on its phase composition, distribution of the main alloying elements, and the...

   M. S. Stechyshyn, M. Ye. Skyba, ... N. K. Medvedchuk in Materials Science

   Article 01 September 2023
   

5. Determination of Wear Resistance of Epoxy-Sand Composites Used in Machine Repairs

   Abstract

   The composition and features of the manufacture of epoxy-sand composite specimens, which is used in the repair of road-building machines, are...

   T. N. Egunova in Steel in Translation

   Article 01 September 2023
   

6. Wear Mechanisms/Models

   The surfaces are continuously damaged by wear. Friction always leads to wear. According to statistics, wear, fatigue, and corrosion are the three...

   Riyadh A. Al-Samarai, Yarub Al-Douri in Friction and Wear in Metals

   Chapter 2024
   

7. Effect of WC-10Co-4Cr Reinforcement Amount on Wear and Corrosion Resistance of Fe-Based Amorphous Coatings

   WC-10Co-4Cr/Fe-based amorphous composite coatings with different WC-10Co-4Cr powder contents (0-12 wt.%) were prepared on C45 steel by plasma...

   Shenglin Liu, Xueqin Ma, ... Qing Meng in Journal of Thermal Spray Technology

   Article 20 May 2024
   

8. Microstructure and Wear Resistance Analysis of TiC/Ni Composite Coating on P110 Steel by Argon Arc Cladding

   In this study, TiC coating and TiC/Ni composite coating were formed on the P110 steel surface, which is commonly used in oil casing, by argon arc...

   Dongli Lv, Li Tian, ... Wenfeng Tu in Transactions of the Indian Institute of Metals

   Article 05 April 2024
   

9. Sliding wear resistance and residual stresses of parts repaired by laser metal deposition

   Large temperature gradients inherent to additive manufacturing (AM) processes induce large residual stress (RS) in the final part. Because RS can...

   Théo Zurcher, Itziar Serrano-Munoz, ... Giovanni Bruno in Journal of Materials Science

   Article 06 December 2023
   

10. Study on the Wear and Corrosion Resistance of CoCrFeNiTi_0.8-xcBN Laser Cladding Coatings

    This work aimed to explore the effect of cBN (cubic boron nitride) content on the microstructures and wear-corrosion resistance of the CoCrFeNiTi _0.8 -x...

    Zhongsheng Li, Kaiqiang Song, ... Changpeng Wang in Journal of Thermal Spray Technology

    Article 23 May 2024
    

11. Wear resistance of molybdenum disulfide-based coatings on titanium alloys: a review

    With the rapid development of the global aerospace industry, higher requirements have been placed on the comprehensive performance of structural...

    Mohan Li, **nfang Zhang, ... Songlin Ding in Journal of Materials Science

    Article 30 March 2024
    

12. Increasing the Wear Resistance of Sliding Bearings by Using Magnetic Fluid

    Abstract

    Conditions of liquid friction formation in radial sliding bearing using magnetic liquid as a lubricant are given. The main factors that...

    S. P. Shets, A. O. Gorlenko, ... D. A. Boldyrev in Steel in Translation

    Article 01 September 2023
    

13. Microstructures and Wear Resistance of Mo Coating Fabricated by In Situ Laser-Assisted Plasma Spraying

    In order to solve the problems of high porosity and poor wear resistance of molybdenum (Mo) coating deposited by atmospheric plasma spraying (APS),...

    Panpan Zhang, Shengyu Jiang, ... Jianhua Yao in Journal of Thermal Spray Technology

    Article 06 November 2023
    

14. Wear Resistance of Titanium Carbide-Modified 25Kh5FMS Deposited Metal

    This study experimentally assessed the effect of microadditives of the Ti–TiC system modifier on the functional properties of the deposited metal of...

    L. M. Lobanov, I. O. Ryabtsev, ... O. L. Mikhodui in Strength of Materials

    Article 01 May 2023
    

15. Enhancing Wear Resistance and Microstructural Evolution of Brass Through Laser Shock Peening

    In this work, the effect of laser shock peening (LSP) on the microstructure evolution and deformation mechanism of a lubricated brass surface layer...

    Yaowen Chen, Yuanyuan Sheng, ... Lin Liu in Tribology Letters

    Article 28 August 2023
    

16. A Comparative Study on Wear Resistance of Cold-Sprayed Aluminum/Quasicrystal Composite Coatings

    Cold spray (CS) technology has proven a great potential in the production of composite coatings, enabling the production of materials with superior...

    Reza Jafari, Jan Cizek, ... Heli Koivuluoto in Journal of Thermal Spray Technology

    Article Open access 25 March 2024
    

17. Synthesis and characterization of organosilicon-modified self-matting waterborne polyurethane with excellent wear resistance

    Self-matting waterborne polyurethane (WPU) with a rough surface suffers from poor wear resistance, which inevitably hinders its service span. Here,...

    Pengfei Niu, Weichen Pan, ... **aohong Peng in Journal of Coatings Technology and Research

    Article 06 July 2023
    

18. Effects of the Ultrasonic Surface Rolling Process on the Surface Integrity, Wear Resistance, and Corrosion Resistance of 4Cr5MoSiV1 Tool Steel Before and After Quenching

    Quenched 4Cr5MoSiV1 tool steel is commonly used as a material for tablet presser dies. However, it exhibits high sensitivity to temperature and...

    Meng Zhao, Guosheng Su, ... Bin Fang in Journal of Materials Engineering and Performance

    Article 02 July 2024
    

19. Raising the Wear Resistance of Chromium-Nickel Steel Surface-Hardened with Titanium Carbide Particles

    Electron microscopy and x-ray diffraction analysis are used to study the structure of coatings deposited on steel 12Kh18N9T by non-vacuum electron...

    E. G. Bushueva, E. A. Drobyaz, ... I. K. Chakin in Metal Science and Heat Treatment

    Article 01 January 2024
    

20. Wear Resistance of Aluminum Alloy A356 After Thorough Anodic Oxidation

    The efficiency of thorough anodic oxidation of ASTM A356 aluminum alloy as an alternative to painting its surface is studied. Microstructure, phase...

    Aziz Bariş Başyiğit, Zeki Azakli, ... Osman Bican in Metal Science and Heat Treatment

    Article 01 September 2023