Search
Search Results
-
Strengthening Effect of Nb on Microstructure and Cavitation Erosion Behavior of Duplex Stainless Steel Surfacing Layer
This paper reports the microstructure and corrosion behavior of a Nb-containing stainless steel surfacing layer prepared by tungsten inert gas (TIG)...
-
Structure and Properties of the Composite SnSbCu–Ti2NbAl Coatings Formed on Steel Substrates by Arc Surfacing
AbstractComposite coatings of the SnSbCu–Ti 2 NbAl system are formed on steel substrates by arc surfacing using a tungsten electrode in an inert gas....
-
Structure, Mechanical Properties and Features of Crack Growth Micromechanism of Maraging Steel Obtained by Hybrid Additive CMT Surfacing
The effect of heat treatment (quenching and aging) on the structure and mechanical characteristics of maraging steel Cr12Ni9Mo2Si (EP659A) obtained...
-
Cavitation Erosion Behavior of Nb Strengthened Duplex Stainless Steel Surfacing Layer
In this paper, the Nb-containing duplex stainless steel (DSS) was prepared using the tungsten inert-gas welding powder surfacing method, and the...
-
Effect of Ni Interlayer on Cavitation Erosion Resistance of NiTi Cladding by Tungsten Inert Gas (TIG) Surfacing Process
The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process, aiming at achieving...
-
Metallurgical Features of Plasma Surfacing Repair of Magnesium Alloys
Results are provided for studying formation of the structure and properties of products made of high-strength light alloy ML5 of the...
-
Deposition Process
Deposition process: beam solid deposition (laser, electron beam based); arc welding based deposition using gas Tungsten arc, gas metal arc, and... -
Tungsten Carbides
Tungsten forms with carbon several chemical compounds (see also section C – W in Table I-2.13): tungsten monocarbide δ-WC1±x phase (hexagonal... -
Methods to Improve TIG Welding Efficiency
With its excellent welding quality and high arc stability, tungsten inert gas (TIG) welding occupies a significant proportion in industrial...
-
Influence of Magnesium Alloy Surface Preparation Quality During Plasma Welding with a Reverse Polarity Current on Deposited Metal Structure and Properties
Results are given for a study of structure and property formation of products made of high strength light alloy ML5 of the...
-
Influence of Induction Treatment on the Pitting Corrosion Resistance of Non-standard Low-Ni High-Mn-N Duplex Stainless Steel Coating
To investigate the influence of induction treatment on the pitting corrosion resistance of non-standard low-Ni high-Mn-N duplex stainless steel (DSS)...
-
Microstructural Characterization of an ERNiCrMo-3 and Grey Cast Iron Interface Obtained via TIG Welding
For some industrial applications, nickel-based superalloys are surface welded onto grey cast iron to improve wear and corrosion resistance. In these...
-
Carbides of Transition Metals: Properties, Application and Production. Review. Part 1. Titanium and Vanadium Carbides
Abstract —The properties, application, and methods for producing titanium and vanadium carbides are considered. These carbides are oxygen-free...
-
Interface characteristics and properties of nickel-based alloy coatings on cast iron fabricated by plasma and cold metal transfer wire-arc deposition
Nickel-based alloy deposition on cast iron surfaces is beneficial to improve wear and corrosion resistance and increase service life. In this paper,...
-
Production of Wear-Resistant Cobalt Alloy Powders
To select and optimize the experimental conditions for producing powders from wear-resistant cobalt alloys, the following methods were tested: gas...
-
Influence of Preheating on Lamellar Gray Cast Iron for Surface Layer Welding applications with Plasma-Transferred Arc Powder and Metal Inert Gas Welding Processes with Duplex Steel as Filler Material
The good capacity of gray cast iron for the manufacture of complex geometry components is widely recognized, but its low resistance to corrosion and...
-
Wire Arc Additive Manufacturing using ER2594 Duplex Stainless Steel
The thin-wall specimens of ER2594 duplex stainless steel (DSS) were prepared by metal electrode inert gas shielded arc welding (MIG). It is found...
-
Features of Creating Functional and Functionally Gradient Coatings with a Unique Set of Properties from Composite Powders with Titanium Matrix
The article presents a review of existing methods of gas-thermal spraying of titanium coatings, which are promising for protecting and restoring the...
-
Sliding wear behavior of cold metal transfer cladded Stellite 12 hardfacings on martensitic stainless steel
Cold metal transfer (CMT) welding technique was used in the manufacturing of hypoeutectic carbide-type Co-based Stellite 12 hardfacings on...
-
The role of the microstructural changes during induction preheating on the HAZ liquation cracking susceptibility of Ni-based superalloy
This work presents the influence of high-frequency induction preheating (900, 1000, 1100 °C) on liquation crack formation in the René 108 Ni-based...