Search

Search Results

1. Thermogravimetric Study of the Kinetic Characteristics of the Solid-Phase Transformation in Kh30N60M9 and Kh23N65M13 Alloys in the Temperature Range 500–650°C

   Abstract

   The structural states of single-phase Kh30N60M9 and Kh23N65M13 alloys are studied upon heating at a rate of 1.0°C/min. The structural states...

   D. L. Mikhailov, V. A. Ermishkin, ... S. P. Kulagin in Russian Metallurgy (Metally)

   Article 01 September 2023
   

2. Kinetic Prediction for Isothermal Transformation of Inclusions in a Bearing Steel

   The mechanism of inclusions transformation during the isothermal heating at 1498 K was elucidated in the current study, that was, the CaO in...

   Ju** Wang, Lifeng Zhang, ... Qiang Ren in Metallurgical and Materials Transactions B

   Article 30 November 2021
   

3. Kinetic Models Versus Hodograph Equation

   Classic kinetic theories for crystal growth and meltingMelting are stated through diffusion- or collision-limited models of fluxes of particle...

   Peter Galenko in Phase Field Theory in Materials Physics

   Chapter 2024
   

4. Influence of Mn–Si elements on the kinetics of oxidative phase transformation under continuous cooling conditions and modeling study

   In this paper, a simultaneous thermal analyzer carried out isothermal eutectoid transformation experiments of Fe–0.4Mn, Fe–1.2Mn, and Fe–1.2Mn–0.2Si...

   Guangming Cao, Wencong Zhao, ... Zhenyu Liu in Journal of Materials Science

   Article 24 May 2024
   

5. Phenomenological Modeling of Deformation-Induced Martensite Transformation Kinetics in Austenitic Stainless Steels

   The aim of this study is to predict the kinetics of deformation-induced martensite transformation (DIMT) by proposing a novel model considering the...

   Wen Zhang, Qide Zheng, ... Zhen Zhao in Metallurgical and Materials Transactions A

   Article 25 October 2023
   

6. An in situ synchrotron X-ray study of reverse austenitic transformation in a metastable FeMnCo alloy

   This study concerns reverse austenitic transformation of plastic strain-induced hexagonal close-packed martensite. With the aid of in situ...

   Shaolou Wei, Jiyun Kang, Cemal Cem Tasan in Journal of Materials Research

   Article Open access 29 November 2022
   

7. Kinetic analysis of austenite transformation for B1500HS high-strength steel during continuous heating

   The dilatometric curves of B1500HS high-strength steel at different heating rates were measured by a Gleeble-3800 thermal simulator and analyzed to...

   Mu-yu Li, Dan Yao, ... Ying-** Guan in International Journal of Minerals, Metallurgy and Materials

   Article 09 November 2020

8. Thermodynamic Approach to Describe the Martensite Phase Transformation Kinetics via the Stabilization of Austenite

   Abstract

   This study investigated the spread of the martensite transformation, i.e. , the extent of the transformation as a function of the...

   Steve Gaudez, Juan Macchi, ... Sébastien Y. P. Allain in Metallurgical and Materials Transactions A

   Article 12 January 2024
   

9. Steady-State Isotopic Transient Kinetic Analysis (SSITKA)

   The principles and practical use of steady-state isotopic transient kinetic analysis (SSITKA) for studying heterogeneous catalytic reactions are...

   Anders Holmen, Jia Yang, De Chen in Springer Handbook of Advanced Catalyst Characterization

   Chapter 2023
   

10. Studying Phase and Structural Transformation Upon Formation of Weld Joint of Rail Steel. Report 3. Using Thermal Kinetic and Isothermal Diagrams of Austenite Decomposition while Selecting Optimum Modes of Electric Welding

    Abstract

    During contact flash welding of rails, the metal in the area of thermal impact is heated and continuously cooled. Accelerated heating and...

    E. V. Polevoi, Yu. N. Simonov, ... A. R. Mikhno in Steel in Translation

    Article 01 February 2022
    

11. Non-isothermal Kinetic Analysis of High Temperature Oxidation of Additively Manufactured Ti-6Al-4V Alloy

    In this study, for the first time, non-isothermal oxidation behavior of the AM Ti-6Al-4V alloy was investigated through TGA-DTA to predict and...

    Selim Demirci, Berçem Kıran Yıldırım, ... Tuncay Dikici in Journal of Materials Engineering and Performance

    Article 13 May 2024
    

12. Kinetic Laws of the Hydrochloric Acid Leaching of the Slime from Quartz–Leucoxene Sandstones

    Abstract

    The kinetics of atmospheric hydrochloric acid leaching of the iron-containing slime formed during quartz–leucoxene sandstone beneficiation is...

    Yu. V. Zablotskaya, K. G. Anisonyan, ... I. S. Litvinova in Russian Metallurgy (Metally)

    Article 01 November 2023
    

13. Iron Polymorphism. Part 3. Iron Polymorphic Transformation as a Phase Transformation Based on High-Temperature Solid-State Volume Photon Ionization

    Abstract

    The model of the metal bond structure based on an electrostatic coordination sphere as a basic element of the metal crystal lattice is...

    S. V. Davydov in Steel in Translation

    Article 01 November 2023
    

14. Data Assimilation for Microstructure Evolution in Kinetic Monte Carlo

    Modeling grain growthGrain growth has been a subject of interest in computational material science, as it occurs in thermal-based processing methods...

    Anh Tran, Yan Wang, Theron Rodgers in TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2023
    

15. In situ observation of mesophase transformation behaviour and mechanistic analysis in β-resin

    β-Resin was extracted by solvent separation of refined coal tar pitch. Several analytical methods revealed that β-resin had a better aromatic plane...

    Ben Liu, ** Yan, ... Zhanjun Liu in Carbon Letters

    Article 01 January 2024
    

16. Deformation microstructures and martensitic transformation pathways in cryogenically deformed 316L stainless steel

    Liquefied gas storage and transportation, as well as space propulsion, are driving increasing interest in the cryogenic temperature deformation...

    Suning Li, Philip J. Withers, ... Kun Yan in Journal of Materials Science

    Article Open access 26 January 2024
    

17. Kinetic Analysis of Hydrogen Reduction of Nickel Compounds

    A review on the hydrogen reduction kinetics of NiO, NiCO _3, and Ni(OH) ₂ hydrogen was conducted, and the most significant experimental values and...

    Sonja Pöyhtäri, Juhani Ruokoja, ... Pekka Tynjälä in Metallurgical and Materials Transactions B

    Article Open access 14 November 2023
    

18. The Generalized Additivity Rule for Thermal Path-Dependent Diffusion-Controlled Phase Transformation by Simultaneous Nucleation and Growth and Its Mathematical Solutions

    Scheil’s additivity rule is widely applied to converting isothermal phase transformation kinetics to anisothermal ones. However, it often causes...

    Chunyuan Cui, Guangming Cao, ... Zhenyu Liu in Metallurgical and Materials Transactions A

    Article 24 August 2022
    

19. Analysis of the Kinetics of Isothermal Bainitic Transformation in Alloy Steels

    Isothermal bainitic transformation is studied in commercial and experimental alloy steels of various compositions using dilatometry. The effect of...

    M. V. Maisuradze, A. A. Kuklina, ... V. V. Nazarova in Metal Science and Heat Treatment

    Article 01 November 2023
    

20. Description of martensitic transformation kinetics in Fe–C–X (X = Ni, Cr, Mn, Si) system by a modified model

    Controlling the content of athermal martensite and retained austenite is important to improving the mechanical properties of high-strength steels,...

    **yuan Geng, Hongcan Chen, ... Qian Li in International Journal of Minerals, Metallurgy and Materials

    Article 01 May 2024