Search
Search Results
-
The Influence of the Anode Structure on the Electrical Properties of a Solid Oxide Fuel Cell
The volt-ampere and impedance characteristics of solid oxide fuel cells (SOFC) at 800°C depending on the structure of the anode, electrolyte, and...
-
Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells
Performance degradation shortens the life of solid oxide fuel cells in practical applications. Revealing the degradation mechanism is crucial for the...
-
Effect of Low Plasma Spraying Power on Anode Microstructure and Performance for Metal-Supported Solid Oxide Fuel Cells
Metal-supported solid oxide fuel cells have broad application prospects in distributed power generation, transportation, military, and other fields....
-
Solid-oxide fuel cells: A critical review of materials for cell components
Solid-oxide fuel cells are efficient devices for the conversion of chemical to electrical energy and a typical solid-oxide fuel cell consists of a...
-
Lattice Boltzmann simulation study of anode degradation in solid oxide fuel cells during the initial aging process
For present solid oxide fuel cells (SOFCs), rapid performance degradation is observed in the initial aging process, and the discussion of the...
-
Activating and stabilizing the surface of anode for high-performing direct-ammonia solid oxide fuel cells
Ammonia has been recognized as a promising fuel for solid oxide fuel cells (SOFCs) because of its relatively high hydrogen content and high energy...
-
A thermodynamic perspective on electrode poisoning in solid oxide fuel cells
A critical challenge to the commercialization of clean and high-efficiency solid oxide fuel cell (SOFC) technology is the insufficient stack lifespan...
-
Energy Conversion Materials: An Electrolyte for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFCs) Applications
Oxide-ion conductor solid electrolytes are useful for intermediate-solid oxide fuel cell (IT-SOFCs) applications. SOFCs are electrochemical devices,...
-
PID Controller for Precise Voltage Output of Solid Oxide Fuel Cell
In this paper, we introduce a novel methodology for precise control of Solid Oxide Fuel Cell (SOFC) systems, aiming to optimize power generation...
-
Limitations and trends on cobalt-free cathode materials development for intermediate-temperature solid oxide fuel cell- an updated technical review
Intermediate-temperature solid oxide fuel cell (IT-SOFC) work at moderate temperature range (600—800 ℃), thereby eliminating the issue of thermal...
-
Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells: Experimental and numerical study
Solid oxide fuel cells (SOFCs) have attracted a great deal of interest because they have the highest efficiency without using any noble metal as...
-
Performance and stability of electrolyte-supported solid oxide fuel cells: from button-sized to 5 × 5 cm2
We prepared button-sized and 5 × 5 cm 2 electrolyte-supported solid oxide fuel cells. The button-sized cell with a 150-micron-thin electrolyte shows a...
-
Investigation on the Mechanical Behavior and Fracture Mode of Ice-Templated NiO-YSZ Anode Electrode for Solid Oxide Fuel Cells Application
An aqueous slurry of nickel oxide (NiO) and yttria-stabilized zirconia powders mixture was freeze-cast to fabricate anisotropic porous-graded...
-
Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells
For metal-supported solid oxide fuel cells, gadolinium-doped cerium ceria (GDC) is one of the most promising electrolyte materials due to its high...
-
Development of La and Mo Co-Doped SrTiO3 as Novel Anode Material for Solid Oxide Fuel Cell Applications
The structural, thermal and electrical attributes of co-doped SrTiO3 system (La3+ at Sr-site and Mo6+ at Ti-site) were studied. The solid solution...
-
Catalyzing oxygen reduction reaction with a worm-like oxide Ca3Co2O6 in solid-oxide fuel cells
A worm-like oxide Ca 3 Co 2 O 6 was prepared by electrostatic spinning as a cathode material for solid-oxide fuel cells. Compared to the plain granular...
-
Perovskite Manganite Materials: Recent Advancements and Challenges as Cathode for Solid Oxide Fuel Cell Applications
In the current scenario, the materials research activity plays a crucial role in the areas such as multiphase composite cathodes, ceramics anodes and...
-
Recent advances and influencing parameters in develo** electrode materials for symmetrical solid oxide fuel cells
This article delivers a robust overview of potential electrode materials for use in symmetrical solid oxide fuel cells (S-SOFCs), a relatively new...
-
Self-assembled FeRu bimetallic nanocatalysts for efficient and durable mutual CO–CO2 conversion in a reversible solid oxide electrochemical cell
Herein, we report a phase-transformed fuel electrode to carry out the reversible CO–CO 2 conversion in a reversible solid oxide electrochemical cell...
-
Characterization of anode supported micro-tubular solid oxide fuel cells prepared by successive non-aqueous electrophoretic deposition
In this study, micro-tubular solid oxide fuel cells (MT–SOFCs) were manufactured by successive electrophoretic deposition (EPD) in non-aqueous...
