Search
Search Results
-
Numerical Simulation and Experimental Study of Al/Mg Bimetallic Extrusion Shear Forming
Al/Mg alloys are extruded at different temperatures to form coated rods by extrusion shear (ES) deformation technology. The deformation behavior of...
-
Simple Shear Extrusion of Al/Al2O3 Composite Prepared by Stir Casting and Hot Forging
In this study, aluminum/alumina composites with 3 and 5 vol% reinforcement particles were manufactured via stir casting and hot forging; they were...
-
Texture Analyses and Mechanical Behavior of a High-Mn Steel Subjected to Different Pass Number of Simple Shear
The microstructural evolution of TWIP steels under high strain-induced microstructural refinement is complex and requires careful investigation. A...
-
The mechanics of the friction-assisted lateral extrusion process
The friction-assisted lateral extrusion process (FALEP) is gaining attention as a candidate for fabricating high-performance ultrafine grain alloys...
-
Effects of Extrusion Temperature on the Properties of a 0.5 wt% GNP/Al Composite in Porthole Die Extrusion
A 0.5 wt% GNP/Al composite was prepared by powder metallurgy and hot pressing. The numerical simulations and experiments of porthole die extrusion...
-
Preparation of AZ31 Magnesium Alloy Thin-Walled Tubes by a New Type of Compound Extrusion by Direct Extrusion and Multi-Pass Bending
Using a combination of direct extrusion and two-step bending, a novel severe plastic deformation process TEB (tube extrusion bending) was developed...
-
Influence of In-Plane Simple Shear Strain on the Grain Orientation Regulation and Stretch Formability of Pre-twinned AZ31 Magnesium Alloy Sheet
Pre-twin is widely accepted as an efficient method for weakening the basal texture to improve the plasticity of magnesium alloys, particularly for...
-
Dislocation-Based Finite Element Modeling of an Off-Axis Twist Extrusion with Variable Helix Angles
This study presents a comprehensive investigation into the deformation behavior and microstructural characteristics of pure aluminum during off-axis...
-
The Spatial Variation of Crystallographic Texture During Axisymmetric Solid Bar Extrusion of an Al–Mg–Si Alloy
The use of aluminum extrusions in automotive applications is increasing to reduce vehicle weight for conventional internal combustion engine powered...
-
Effect of Expansion Sphere Diameter on Deformation Behavior of AZ31 Mg Alloy during Extrusion
A new process of expansion-shear extrusion (ESE) was proposed to fabricate AZ31 Mg alloy sheets. The effect of the expansion sphere diameter on the...
-
Shear Deformation Behavior of Heterostructured Materials: Experimental and Numerical Analyses
In this study, the heterogeneous strengthening behavior in shear deformation was experimentally characterized and numerically modeled for the first...
-
Wear Analysis of Hot Extrusion Punch for Large Fan Shaft Based on Archard Wear Theory
In this work, a hot extrusion process was proposed to manufacture the 18Ni (250) maraging steel large fan shaft for aero engines. To reduce the wear...
-
Spot Joining of PVC to Aluminum Sheets via Cold Forward Extrusion
An essential consideration for metal-polymer applications is that the sound joining of these materials is challenging due to a significant surface...
-
Rheology of Shear Thickening Fluid
Performing a complete rheological characterization of shear thickening fluid (STF) is of paramount importance from different perspectives. From the...
-
Integrated Fabrication of Cf/Al Composite and Joining with TC4 via Liquid-Solid Infiltration Extrusion: Microstructure Evolution and Fracture Behavior
Efficiently joining TC4 and carbon fiber-reinforced aluminum matrix (C f /Al) composite greatly expands the applications of composite in the aerospace...
-
High Strength and Excellent Ductility of AZ80 Magnesium Alloy Cabin Component Developed by W-Shaped Channel Extrusion and Subsequent T6 Heat Treatment
The AZ80 magnesium (Mg) alloy cabin component with high strength and excellent ductility was developed by W-shaped channel extrusion (WCE) at 350 °C...
-
Metal Additive Manufacturing Processes – Jetting- and Extrusion-Based Processes
This chapter covers the jetting- (binder jetting and material jetting) and extrusion-based processes. For each process, a brief history of the...
-
Synthesis and characterization of Sn–Cu/SiO2(np) lead-free nanocomposite solder through angular accumulative extrusion
This study synthesized Sn-0.7wt.%Cu/Xwt.%SiO 2 nanocomposite solder by angular accumulative extrusion (AAE). AAE is a severe plastic deformation...
-
Enhanced Strength-Ductility Synergy in Mg-0.5 wt%Ce Alloy by hot Extrusion
The microstructure and mechanical properties of micro-alloyed Mg-0.5 wt%Ce alloys are investigated systemically in this study. It shows that Mg-Ce...
-
Microstructure and Mechanical Property of the Large Cross-Sectioned Mg–Gd–Y–Zn–Zr Alloy Produced by Small Extrusion Ratio
In this work, the microstructure and mechanical properties of large cross-sectioned Mg–9Gd–3Y–1.2Zn–0.5Zr (VWZ931) samples produced by the small...
