Search

Search Results

1. Volatilities of the Saturated Vapor Components of UCl₄–RbCl Molten Mixtures

   Abstract

   For the first time, the volatilities of UCl ₄ and RbCl from their molten mixtures containing 2.0, 5.0, 12.3, 25.2, 32.6, and 48.8 mol % UCl ₄ ...

   A. B. Salyulev, V. Ya. Kudyakov, N. I. Moskalenko in Russian Metallurgy (Metally)

   Article 01 February 2023
   

2. Saturated Vapor Composition and Volatility of Uranium and Some Other Metal Tetrachlorides (ThCl₄, HfCl₄, ZrCl₄, TiCl₄) from Their Molten Mixtures with Alkali Metal Chlorides

   Abstract

   The changes in the saturated vapor composition and the volatility of the components of molten mixtures of uranium and some other metal...

   A. B. Salyulev, V. Ya. Kudyakov in Russian Metallurgy (Metally)

   Article 01 August 2023
   

3. Effect of Oxygen on Water Vapor Oxidation of Fe by Oxygen Partial Pressure Control Using Gas Sensor

   An oxygen pump sensor was installed in front of an oxidation furnace to supply and discharge oxygen to the Ar–H ₂ O atmosphere and accurately control...

   Michihisa Fukumoto, Kano Nakajima in High Temperature Corrosion of Materials

   Article 21 January 2023
   

4. The Effect of Pressure on the Growth of Single-Layer Graphene on Copper Sheets by Chemical Vapor Deposition Methods

   Chemical Vapor Deposition (CVD) is an effective method for large-scale graphene growth, but the growth of single-layer graphene using this process is...

   Aziz Noori, Mohammad Javad Eshraghi, ... Asieh Sadat Kazemi in Journal of Materials Engineering and Performance

   Article 23 May 2023
   

5. Vapor–Liquid Equilibria in the Tin–Lead System in a Primary Vacuum

   Abstract

   The boiling point method (isothermal version) was used to determine the partial pressure of saturated lead vapor over lead and tin solutions,...

   S. A. Trebukhov, V. N. Volodin, ... N. M. Burabayeva in Russian Journal of Non-Ferrous Metals

   Article 30 April 2022
   

6. Thermodynamics of Liquid Alloys and Vapor–Liquid Equilibrium in the Antimony–Tellurium System

   Abstract

   The partial and integral thermodynamic functions of formation and evaporation of antimony-tellurium melts were calculated based on the vapor...

   Valeriy Volodin, Sergey Trebukhov, ... Azamat Tulegenov in Metals and Materials International

   Article Open access 04 January 2024
   

7. Water vapor condensation prevention and risk rating evaluation based on Yang Can’s tomb

   Temperature and humidity variations in burial stone relics can easily cause water vapor condensation, which is an important factor leading to their...

   Wentao Shi, ** Liu, ... Changqing Li in Heritage Science

   Article Open access 03 June 2024
   

8. Modeling of the Temperature Profile When Heating Fuel Oil with Water Vapor in a Single-Pass Tubular Heat Exchanger

   Heat exchange equipment of various types makes up a significant part of technological equipment in the gas and petrochemical industries. This is...

   Dmitry Fugarov, Olga Purchina, ... Anastasia Purchina in Physics and Mechanics of New Materials and Their Applications

   Conference paper 2024
   

9. Volatilities of the Components of the Saturated Vapors of UCl₄ Solutions in a Molten Equimolar NaCl–KCl Mixture

   Abstract

   The volatilities of the components of the saturated vapors of molten UCl ₄ –NaCl–KCl mixtures containing 2.0, 5.0, 12.2, 25.1, 32.9, and 49.7...

   A. B. Salyulev, V. Ya. Kudyakov, N. I. Moskalenko in Russian Metallurgy (Metally)

   Article 25 August 2021
   

10. Low-temperature sintering of ZnO:Al ceramics by means of chemical vapor transport

    A new technological approach for sintering Al-doped ZnO ceramics using chemical vapor transport (CVT) based on HCl has been developed. Among the...

    G. V. Colibaba, D. Rusnac, ... E. V. Monaico in Journal of Materials Science: Materials in Electronics

    Article 12 January 2023
    

11. Borosilicate glass alteration in vapor phase and aqueous medium

    A Na-alumino-borosilicate glass and its Ca-doped counterpart were altered in vapor phase (98% relative humidity) and aqueous medium at 90 °C. Both...

    Sathya Narayanasamy, Patrick Jollivet, ... Frédéric Angeli in npj Materials Degradation

    Article Open access 04 November 2022
    

12. Heat Resistance of Zr–1Nb Alloy Claddings in Water Vapor after Ion-Plasma Nitriding

    The influence of ion-plasma nitriding time of Zr–1Nb alloy fuel cladding tubes on their resistance to oxidation in water vapor at 600–1200°C was...

    V. A. Zuyok, O. S. Kuprin, ... V. V. Shtefan in Materials Science

    Article 01 January 2023
    

13. Quartz Crystal Microbalance Study of Acetone Vapor Adsorption onto Microporous Carbon Adsorbent

    Abstract

    The requirements are shown for the microporous structure of a carbon adsorbent for the selective adsorption of acetone vapors, which is...

    V. N. Simonov, S. D. Artamonova, ... I. E. Menshchikov in Protection of Metals and Physical Chemistry of Surfaces

    Article 01 August 2022
    

14. Influence mechanism of pressure on the toluene desorption from active carbon under supercritical CO₂

    Desorption of activated carbon saturated with VOCs (volatile organic compounds) under supercritical CO ₂ is considered to be a promising method, but...

    **anhang Sun, Zhu Ren, ... **anqiang Zhu in Journal of Nanoparticle Research

    Article 05 August 2023
    

15. A green process for zeolite synthesis: low-temperature vapor phase treatment of natural bauxites

    In this work, three samples of bauxite were used as inexpensive sources for the zeolite formation by a green process based on vapor-phase...

    Claudia Belviso, Maura Mancinelli, Antonio Lettino in Journal of Materials Science

    Article Open access 03 September 2022
    

16. Methanol Pyrolysis-Mediated Reduction of GeO₂ and Chemical Vapor Deposition of Polycrystalline Ge Films

    Methanol is a renewable, low-carbon chemical that can be obtained from biomass. GeO ₂ is the main source for producing Ge, which is an important...

    M. Cumbul Altay, S. Eroglu in Metallurgical and Materials Transactions B

    Article 04 December 2023
    

17. Thermochemical Stability of Yb₂Si₂O₇ Environmental Barrier Coatings During Thermal Cycling and Water Vapor Corrosion at 1350 °C

    In this study, Si/mullite/Yb ₂ Si ₂ O ₇ trilayer environmental barrier coatings (EBCs) were prepared by atmospheric plasma spraying. The thermochemical...

    Lin Chen, Bo Yang, ... Guan-Jun Yang in Journal of Thermal Spray Technology

    Article 23 May 2023
    

18. Simulating the Effect of Field Electron Emission from a Cathode with a Thin Dielectric Film on Its Sputtering in a Gas Discharge in an Argon and Mercury Vapor Mixture

    Abstract

    We propose a model for a low-current gas discharge in a mixture of argon and mercury vapor in the presence of a thin dielectric film on the...

    G. G. Bondarenko, V. I. Kristya, ... M. R. Fisher in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

    Article 01 April 2024
    

19. An Entropy Approach to Optimizing Heat Recovery in High-Pressure Autoclave Circuits

    In many hydrometallurgical pressure oxidation (POX) processes and almost all high-pressure acid leaching (HPAL) processes, the recovery and efficient...

    Murray Pearson, Frank Cheuk, Cinziana Sist in Proceedings of the 62nd Conference of Metallurgists, COM 2023

    Conference paper 2023
    

20. Microstructure and magnetic properties of vapor-grown CdTe:Cr crystals with do**-induced precipitates

    The effects of heavy do** with Cr and do**-induced precipitation on the magnetism of CdTe crystals, grown from the vapor phase, were investigated...

    K. Morawiec, V. D. Popovych, ... M. Shiojiri in Journal of Materials Science

    Article 22 March 2023