Search
Search Results
-
Effect of Ca or/and Sr on Microstructure Evolution and Mechanical Properties of Extruded Mg-2Zn Alloy
Mg-Zn alloys with Ca and Sr additions were prepared by vacuum melting and hot extrusion. Effects of Ca or/and Sr on microstructure, mechanical... -
Improving Aging Behavior and Corrosion Resistance of Mg-5Ga Alloy by Ca Alloying
Aging behavior, mechanical behaviors and corrosion resistance of Mg-5Ga- x Ca ( x = 0, 0.2 wt.%) alloys have been researched. Rod-shaped and lump-shaped...
-
Precipitation Behavior in Low-alloyed Mg–Ca–Zn Alloys
Low-alloyed Mg–Ca–Zn alloys are promising as a base system of heat-treatable wrought alloys because of their rapid age-hardenability. The trace... -
KCl, KNO3, and Annealing for Modifying the Morphology and Properties of Ca-P Layers on Mg Alloy
The aim of the work was to obtain a dense and uniform calcium phosphate (Ca-P) coating on the studied magnesium (Mg) alloy using simple methods that...
-
Dominant Deformation Mechanisms in Mg–Zn–Ca Alloy
The coaddition of Zn and Ca has great potential to improve the ductility of Mg alloys. Herein, the mechanical properties of an extruded Mg–Zn–Ca...
-
Atmospheric Corrosion Resistance of a Diecast Mg-Al-Ca-Si Magnesium Alloy with Continuous Intermetallic Phases
Atmospheric corrosion resistance of a diecast Mg-Al-Ca-Si alloy was investigated by long-term field exposure, and compared to that of a wrought AM60...
-
Optimization of the clinically approved Mg-Zn alloy system through the addition of Ca
BackgroundAlthough several studies on the Mg-Zn-Ca system have focused on alloy compositions that are restricted to solid solutions, the influence of...
-
Microstructure and Strength Properties of the Mg-Zn-Ca-Er Alloy Produced by Spark Plasma Sintering (SPS) Method
In this work, a novel Mg-Zn-Ca-Er alloy was prepared. A spark plasma sintering (SPS) technique was used to produce samples from powders synthesized... -
Solid-Phase Processing of Mg–Al–Mn–Ca for High Strength and Ductility
While rare-earth Mg alloysMagnesium alloy have remarkable properties for high strength applications, lower cost alternatives are necessary for the... -
Development of Mg-Sb-Sn and Mg-Sb-Ca Magnesium Alloys for Automotive Applications: Microstructure, Mechanical Properties, and Corrosion Behavior Analysis
In the present study, two Mg-Sb-Sn and Mg-Sb-Ca alloys were prepared, and their microstructure, mechanical and corrosion properties were studied...
-
On the Microstructure and Mechanical Properties of Mg-Gd Alloy with Combined Zn and Ca Addition
The effects of combined addition of Zn and Ca to Mg-1Gd alloy (Mg-1Gd-1.5Zn-1Ca wt.%) on its microstructure and mechanical properties were studied....
-
Mechanical Integrity and In vitro Degradation Behavior of Mg–Zn–Ca Biodegradable Alloy Prepared by Different Casting Technologies
Mg–Zn–Ca alloys have been widely used as biodegradable orthopedic and cardiovascular scaffolds because of their non-cytotoxicity, remarkable...
-
Role of trace additions of Ca and Sn in improving the corrosion resistance of Mg-3Al-1Zn alloy
The limited wide applicability of commercial Mg alloys is mainly attributed to the poor corrosion resistance. Addition of alloying elements is the...
-
Effect of grain refinement on biomineralization and biodegradation of Mg–Ca alloy
Magnesium (Mg) is a promising material for temporary implant applications due to its biodegradability and mechanical properties. However, the rapid...
-
The Cytotoxic and Genotoxic Assays of Mg-Ag Alloy Doped with Zn, Ca, and Nd Elements
Magnesium alloys are being studied for their potential as biodegradable metals, and there is a growing need for multipurpose materials, such as those...
-
Enhanced Corrosion Resistance in High-Strength Biodegradable Mg-Zn-Ca-Si Glassy Alloy Composite via Preparation of a Self-Sealing Plasma Electrolytic Oxidation Layer
In this study, a dendrites reinforced Mg 85.9 Zn 12 Ca 2 Si 0.1 glassy alloy composite was fabricated through rapid solidification. After self-sealing...
-
Role of Mn Addition in Tuning the Microstructure and Mechanical Properties of Mg-Al-Ca Dilute Alloy
In this work, the role of manganese (Mn) addition in tuning microstructure and mechanical properties of the Mg-1.0Al-0.4Ca- x Mn (x = 0.6, 1.0, 1.34...
-
Effect of Recrystallization and Partial Remelting on Al15Mg45Li39Ca0.5Si0.5 Lightweight High-Entropy Alloy
The semi-solid Al 15 Mg 45 Li 39 Ca 0.5 Si 0.5 lightweight high-entropy alloy was prepared by recrystallization and partial remelting. The results show that...
-
Microstructure, texture, and mechanical properties of Mg–4Zn–1Mn–xCa alloys and the fabrication of biomedical Mg thin-walled micro-tubes
In this study, the microstructure, texture, and mechanical properties of Mg–4Zn–1Mn– x Ca ( x = 0, 0.2, 0.5, wt%) alloys are studied. The thin-walled...
-
Effect of Al Content on the Corrosion Behavior of Extruded Dilute Mg–Al–Ca–Mn Alloy
The microstructure, extrusion texture and corrosion behavior of extruded dilute Mg–Al–Ca–Mn alloy with different Al contents were investigated. The...