Search

Search Results

1. Strength and Tribotechnical Characteristics of an Epoxy Compound–WSe₂ Composite Material

   Abstract

   The hardness, strength, and tribotechnical characteristics of a hard-lubricating composite material based on modified K-153A epoxy resin...

   T. A. Lobova, A. G. Kolmakov, ... I. V. Kostychev in Russian Metallurgy (Metally)

   Article 01 October 2022
   

2. Effect of electro-osmosis on lubrication of fresh cement paste-based material in contact with a metal wall

   This paper presents an experimental investigation of the effect of electro-osmosis on lubricating the interface between the cement paste-based...

   Viet Hai Hoang, Tu Anh Do, ... Yannick Mélinge in Korea-Australia Rheology Journal

   Article 03 July 2023
   

3. Effect of MoS₂ Nanoflakes on Mechanical and Tribological Behavior of Composite Friction Material Fabricated by Pressure-Assisted Sintering

   Abstract

   The MoS ₂ nanoflakes can be a novel candidate as a solid lubricant in fabricating friction material for automotive brake-pad disc systems. In...

   Ashish Saurabh, Abhinav Manoj, ... Piyush Chandra Verma in Metals and Materials International

   Article 03 October 2023
   

4. Friction and Lubrication of Eye/Lens/Lid Interface: The Effect of Lubricant and Contact Lens Material

   Irritation of the eye in the case of contact lens users may imply dry eye syndrome (DES), commonly treated by eye drops. The paper focuses on...

   David Nečas, Vlastimil Kulíšek, ... Martin Vrbka in Tribology Letters

   Article Open access 26 September 2023
   

5. An Inverse Method to Estimate Cowper-Symonds Material Model Parameters from a Single Split Hopkinson Pressure Bar Test

   This paper presents the estimation of the parameters of the Cowper-Symonds material model of a commercial copper alloy from a single Split Hopkinson...

   C. Hernandez, D. L. Blanco, A. Maranon in Journal of Dynamic Behavior of Materials

   Article 24 February 2023
   

6. Tribological Test of Composites Material Lubricated with Various Solid-Liquid Lubricating System

   Nowadays, the use of lubricants in the industrial sector is rapidly increasing, particularly in applications that are subject to high loads and high...

   Y. Aiman, N. F. Azman, S. Syahrullail in Tribological Applications of Composite Materials

   Chapter 2021
   

7. Utilization of Plant Oil-Based Fatliquor in the Processing of Leather

   The chemical and mechanical steps in the leather-producing process—soaking, unhairing/liming, deliming/bating, pickling, tanning,...

   I. H. Ifijen, I. O. Bakare, ... P. O. Ayeke in TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings

   Conference paper 2023
   

8. Tribological Evaluation of Solid Lubricant Enriched in Modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) Oil for Composite Material

   The use of lubricant during the machining process plays an important role to reduce friction and wear. Mineral-based oil is the most widely used...

   N. Talib, R. M. Nasir, ... A. Saleh in Tribological Applications of Composite Materials

   Chapter 2021
   

9. Effect of Material Hardness on Water Lubrication Performance of Thermoplastic Polyurethane under Sediment Environment

   Water-lubricated stern tube bearings are widely used in marine shaft systems, where their lubrication performance determines the efficiency and...

   Zhengming Jia, Zhiwei Guo, Chengqing Yuan in Journal of Materials Engineering and Performance

   Article 07 June 2021
   

10. John Charnley’s Assistant: Harry Craven and the Charnley Hip

    The years 1958 to 1966 represent a period in which the modern hip replacement operation was developed by John Charnley at the Wrightington Hospital,...

    Roger G. Metcalfe, Martyn Porter in Biomedical Materials & Devices

    Article 13 February 2024
    

11. Multiple Optimization of Cutting Parameters on Turning of 9XC Heat Treatment Steel Under MQL Cutting Conditions

    This study towards the multi-response optimization of cutting parameters when turning 9XC heat treatment steel using Minimum Quantity Lubrication...

    Van Hung Pham, Khanh Huyen Nguyen, ... Thuy Duong Nguyen in Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)

    Conference paper 2024
    

12. Lubrication and Lubricants

    Due to surface characteristics including reactivity, lesser hardness, mutual solubility, and higher surface energy, the sliding of two solid...

    Riyadh A. Al-Samarai, Yarub Al-Douri in Friction and Wear in Metals

    Chapter 2024
    

13. Anti-wear Performance of WC-10Co4Cr Coating in Water-Based Drilling Fluid with Different Contents of Filtrate Reducer and Bentonite Clay

    To improve the anti-wear performances of drilling tools in geological prospecting, WC-10Co4Cr coating spayed via high-velocity oxygen-fuel (HVOF) was...

    Wang Hao-dong, Yue Tian-yang, ... Yue Wen in Journal of Materials Engineering and Performance

    Article 28 November 2022
    

14. Synthesis and application of biomass-derived magnetic biochar catalyst for simultaneous esterification and trans-esterification of waste cooking oil into biodiesel: modeling and optimization

    This work created, characterized, and used a magnetic biochar catalyst that is both eco-friendly and very effective. Sugarcane bagasse was selected...

    Samuel Latebo Majamo, Temesgen Abeto Amibo, Tesfaye Kassaw Bedru in Materials for Renewable and Sustainable Energy

    Article Open access 06 July 2023
    

15. Low Friction Mechanism Survey of Tungsten Disulfide by Using XRD, XPS, and XAFS

    Solid lubricants are used to lubricate the mechanical equipment of various spacecraft and launch vehicles. Tungsten disulfide (WS ₂ ) is one of the...

    Ayaka Takahashi, Yasuo Takeichi, ... Keizo Hashimoto in Tribology Letters

    Article 01 June 2021
    

16. The Effect of Reinforcement Composition and Sintering Temperature on Microstructure and Properties of Al-SiC-Fly Ash Composite

    Aluminium and its alloys are gaining more importance in different sectors such as aerospace, automobile, and construction industries due to their...

    Priti Shikha Nanda, A. P. Samal, ... Dinesh Kumar Mishra in Processing and Characterization of Materials

    Conference paper 2023
    

17. Lubricants and Materials for Tribological Applications

    The objectives of this chapter are to: (i) Define the term lubricants and identify, outline and discuss the principal types of lubricants; (ii)...

    Habeeb Adewale Ajimotokan in Principles and Applications of Tribology

    Chapter 2024
    

18. Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

    Develo** new lubrication concepts greatly contributes to improving the energy efficiency of mechanical systems. Nanoparticles such as those based...

    T. MacLucas, P. G. Grützmacher, ... F. Mücklich in Tribology Letters

    Article Open access 11 March 2024
    

19. Behavior Characteristics of Asphalt Components during the Process of Nano-cracks Temperature Self-healing

    In order to investigate the behavior characteristics of asphalt components during the process of nano-cracks temperature self-healing (NTS),...

    Haitao Zhang, Qianhui Zhang, ... Tengjiang Yu in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 16 January 2023

20. Graphite and Carbide Friction and Wear

    In tribological applications like bearings and cutting tools, graphite and carbide are used as components.

    Riyadh A. Al-Samarai, Yarub Al-Douri in Friction and Wear in Metals

    Chapter 2024