Search
Search Results
-
Tensile Properties of Inconel 718 Produced by LMD-Wire
The anisotropyAnisotropy in tensile propertiesTensile properties of Wire Laser Metal Deposited Inconel 718Inconel 718 (LMD-w)LMD-w has been...
-
Research on Rolling Bearing Fault Diagnosis Method Based on Improved LMD and CMWPE
To enhance the precision of rolling bearing fault diagnosis, a new rolling bearing fault diagnosis method based on improved local mean decomposition...
-
Miniature mechanical testing of LMD-fabricated compositionally & microstructurally graded γ titanium aluminides
The design freedom in Laser Metal Deposition provided by the absence of a powder bed enables the fabrication of Functionally Graded Materials through...
-
Wear and Corrosion Resistant Eutectic High-Entropy Alloy Al0.3CoCrFeNiMo0.75 Produced by Laser Metal Deposition and Spark-Plasma Sintering
Eutectic high-entropy alloys (EHEAs) with a fine-lamellar structure and homogenous property profile are of particular interest for wear and corrosion...
-
Effect of solution heat treatment on the microstructure and mechanical properties of laser melting deposited GH 5188 superalloy
GH 5188 is a solution strengthening cobalt-based superalloy, which is widely used for manufacturing hot components with service temperatures of...
-
Influence of Electroshocking Treatment on Microstructure and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Thin-Wall Specimen Manufactured by Laser Melting Deposition
In order to improve the properties of titanium alloys manufactured by laser melting deposition (LMD), the electroshocking treatment (EST) was...
-
Welding of additive manufacturing AlSi10Mg alloys using a laser metal deposition process with different heat inputs
Welding of AlSi10Mg alloys fabricated by additive manufacturing (AM) has been recently conducted to meet the demands for joining or repairing them....
-
Variant Selection in the Thermally Treated Ti-6Al-4V Processed by Laser Metal Deposition
Ti-6Al-4V alloy has specific properties to meet the industrial application. The present work discusses the variant selection in the thermally treated...
-
AISI 316L Stainless Steel Tribological Behavior under Sliding and Erosive Conditions: A Comparison between Spark Plasma Sintering, Laser Metal Deposition, and Cold Spraying
Differently processed AISI 316L SS samples were studied to understand the impact of the fabrication process on their tribological and erosion...
-
High-performance aluminum alloy with fully equiaxed grain microstructure fabricated by laser metal deposition
Since scandium has a significant refining effect on aluminum alloys, the research on aluminum-scandium alloys has continued for decades. The...
-
Effect of Laser Energy Density and Scanning Strategy on Residual Stress in Laser Melting Deposited FGH4096 Superalloy
Due to the high manufacturing cost, the failure or wear of FGH4096 superalloy parts can be quickly repaired through laser melting deposition (LMD)....
-
Process Parameter Optimization for the Laser Metal Deposition of a Functionally Graded GH4169/K417G Superalloy and the Effects of Preheating and Composition on Cracking Behavior
This study aims to select a suitable process and composition for the fabrication of a functionally graded GH4169/K417G superalloy by laser metal...
-
Microstructural Evolution and Properties of Novel Ferritic Stainless Steel–Mox Prepared by Laser Melting Deposition
An investigation was designed to research the effect of molybdenum (Mo) content on the microstructure and properties of novel ferritic stainless...
-
Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition
Metal additive manufacturing (AM), as a disruptive technology in the field of fabricating metallic parts, has shown its ability to design component...
-
3D Monte Carlo simulation: Effects of the scanning strategy on the grain evolution of AISI 304 powder by laser melting deposition
As a typical additive manufacturing, laser melting deposition (LMD) is particularly sensitive to processing parameter. The microstructure...
-
Microstructure and Mechanical Properties of FeCo45 Stainless Steel Fabricated by Laser Melting Deposition
AbstractMultilayer iron-based superalloy FeCo45 was prepared on Q235 stainless steel by laser melting deposition (LMD) in this work, and effect of...
-
Supersonic particle bombardment of additive manufactured Ti6Al4V-induced gradient microstructure with prominent tribology and corrosion resistance
The effects of supersonic particle bombardment (SFPB) on the microstructure, microhardness and wear property of Ti6Al4V alloy prepared by laser metal...
-
Laser additively manufacturing of Al0.5CoCrFeNiTi0.5 high-entropy alloys with increased resistances to corrosion 3.5% NaCl and oxidation at 1000 °C
Conventionally arc-melted Al 0.5 CoCrFeNiTi 0.5 is a high-entropy alloy (HEA) consisting of a major body-centered cube (BCC) phase and a minor...
-
Microstructure and Mechanical Properties of Ti6Al4V/Inconel625 Bimetallic Structures Fabricated by Laser Melting Deposition
Ti6Al4V/Inconel625 bimetallic structure (TC4/IN625 BS) exhibits promising applications in the aerospace field under harsh environments, such as high...
-
Investigation of network microstructure of TiB/Ti6Al4V-ELI composite manufactured with laser metal deposition
This work presents the microstructural investigation of an in situ synthesized TiB/Ti6Al4V-ELI composite that was manufactured with additive...
