Search
Search Results
-
Effects of Surface Roughness on Interface Bonding Performance for 316H Stainless Steel in Hot-Compression Bonding
The metallurgical bonding quality of bonding joints is affected by the substrate surface state in hot-compression bonding (HCB), and the surface...
-
Particle Size Effects of Nano-Ag Films on the Interface Sintered Bonding for Die Attachment
Three nano-Ag films with different particle size distribution were fabricated as die-attach materials by pulsed laser deposition (PLD) using...
-
Influence of Post-Bonding Annealing Treatment on Interface Characteristics of Si-Si Wafer Bonded via Room Temperature Surface Activation
In order to improve the bonding quality of Si-Si wafers, room temperature Si-Si surface-activated bonding based on Mo nano-interlayer and...
-
Interface Bonding Behavior of 2219Al/AZ31B Alloy Bimetallic Ring Blank Subjected to Vertical Centrifugal Casting
The vertical centrifugal casting of 2219Al/AZ31B alloy bimetallic ring blank is performed using ProCAST software. The influence of rotation speed of...
-
Diffusion Bonding Process and Interface Performance of 2198 Al-Li Alloy
The diffusion bonding process can take full advantage of 2198 Al-Li alloy to produce high-efficiency integral structures. However, the dense and... -
Study on Interface Bonding Behavior and Quality Control of 40Cr/Q345B Bimetallic Ring Blank in Vertical Centrifugal Casting
In this study, the vertical centrifugal casting was used to produce a bimetallic ring blank with an outer layer of 40Cr and an inner layer of Q345B....
-
Interface Bonding Mechanism of 2024/6061 Aluminum Alloy Bimetallic Casting Blank Subjected to Isothermal Compression
The present study conducted the isothermal compression of 2024/6061 aluminum alloy bimetallic casting blank using a Gleeble-3500 thermal simulator in...
-
Interface microstructure regulation and bonding performance of powder metallurgy Al/Mg bimetal with Ni interlayer
Due to its excellent performance of lightweight and high strength, Al/Mg bimetal has high application value in the aerospace field. However, the poor...
-
Effect of Hot-Pressing Rate on Interface and Bonding Strength of Mg/Al Composite Sheets with Zn Interlayer
In this work, the AZ31/1060 laminated metal composites with Zn interlayer were successfully prepared by hot pressing with a strain of 47% in the...
-
Strong bonding effect and Zn segregation et Al/Fe bimetallic composite interface: A first-principles study
The focus of this first-principles study is to elucidate the interface structure and interactions at the Al/Fe bimetal interface by comparing the...
-
Microstructural Nano-Scale Evolution at Inter-Particles Bonding Interface of Cold-Sprayed Ti6Al4V Deposits During Heat Treatment
The inter-particle bonding (IPB) mechanism of cold-sprayed titanium alloy during heat treatment (HT) is not clear. The interfacial microstructure and...
-
Bonding Interface Evolution Characteristics of Laser Depositing Ti2AlNb Intermetallic Compound on the Near-α Titanium Alloy Plate
Gradient titanium alloys are more conducive to meeting the requirements of large temperature and stress gradients than single homogeneous titanium...
-
Stretchable iontronics with robust interface bonding between dielectric and ion-conducting elastomers
Dry ion-conducting elastomers (ICEs) are emerging stretchable and ionic conductive materials that are demonstrated with excellent thermal stability...
-
Interface Bonding Mechanism of Ti3Al0.125Cr0.875 N/WC Carbide: A First Principles Study
The interface bonding mechanism between Ti 3 Al 0.125 Cr 0.875 N coating and WC carbide tool is calculated and analyzed based on the first-principles...
-
Hydrogen bonding and π-π interaction enhanced high thermal interface design with low dielectric loss of BN/PI/epoxy for high voltage-high frequency insulating application
The formation of thermally conductive pathway is the key to improve thermal conductivity (TC), and the interface design of filler/polymer is the key...
-
Effects of pin size and of using an interlayer on interface bonding and fatigue strength of AA2024 to Ti6Al4V lap joints made using friction stir welding
A strong effort has continued to optimize friction stir lap welding (FSLW) process and to achieve high strength of dissimilar metal welds. For more...
-
Interface regulation of Cu2Se via Cu-Se-C bonding for superior lithium-ion batteries
Transition metal selenides have aroused great attention in recent years due to their high theoretical capacity. However, the huge volume fluctuation...
-
Introduction—Interfaces in Adhesion and Adhesive Bonding
The social background of research on adhesion and adhesive bonding is reviewed. Next, the interphase in the adhesive bond is defined, and the... -
Effect of fretting stimulation on the growth and bonding of the active bone–titanium bead coating fixed interface
The loosening of the fixed interface between inactive artificial joint material and human bone seriously affects the rehabilitation of patients after...
-
Element Migration and Diffusion at the Bonding Interface of the Bimetallic Composite Billet Produced by the ESRC Method
A bimetallic GCr15/45 carbon steel has been produced by the newly developed electroslag remelting cladding (ESRC) technique. Based on the solidified...