Search

Search Results

1. Process Development for Passive Granular Media-Based Tube Press Hardening

   To produce tubular components with high-strength and high-stiffness but without length restriction, a new process based on a combination of press...

   Florian Kneuper, Joshua Grodotzki, A. Erman Tekkaya in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

2. Fibrous and granular activated carbon mixed media for effective gas removal as a cabin air filter

   There is a need for the purification of indoor air owing to a high rate of pollution in today’s world. For this, cabin air filters (CAFs) are widely...

   Jae-Hyung Wee, Younghwan Bae, ... Sang Young Yeo in Carbon Letters

   Article 04 May 2022
   

3. Mechanical Reaction of Granular Filler and Its Interaction Mechanism with Tube During Push-Bending Process

   In newly developed tube bending process, fillers are generally used to introduce internal pressure in active or passive way, which can reduce the...

   Wenlong **e, Shuaifeng Chen, ... Shihong Zhang in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

4. Processes of Obtaining Granular Materials from Al–Zn–Mg–Cu Aluminum Alloys Using Ultra-Fast Granular Crystallization

   This paper presents the results of studies into the process of obtaining granular materials from high-strength aluminum alloys of the Al–Zn–Mg–Cu...

   M. V. Zharov in Metallurgist

   Article 01 July 2022
   

5. Modular-Pouring Furnace with the Local Granular Media Flow Rates Distributed Between Thermal Zones

   The paper presents the results of analytical and experimental studies of the thermal zones in the working space of the modules of an electric pouring...

   A. I. Nizhegorodov, A. N. Gavrilin, ... G. M. Ismailov in Refractories and Industrial Ceramics

   Article 01 March 2021
   

6. Experimental Analysis on Granular Media-Based Tube Forming with Active Axial Feed

   Production of high strength, high stiffness, and safety-relevant profile parts is feasible through the sequence of media-based forming and in-die...

   E. Hoffmann, C. Löbbe, A. E. Tekkaya in Forming the Future

   Conference paper 2021
   

7. Bagnold velocity profile for steady-state dense granular chute flow with base slip

   The three-halves Bagnold profile for granular flow down an incline, assuming no-slip at the base, is a generally accepted velocity profile that...

   James M. Hill, Debayan Bhattacharya, Wei Wu in Rheologica Acta

   Article 11 January 2022
   

8. Macro-alignment responses of preosteoblast MC3T3-E1 cells on DCPD-coated β-TCP porous scaffolds: Effect of liquid volume/mass ratio and granular sizes

   Extensive assessment of bone-like cell responses towards porous β-tricalcium phosphate scaffolds has shown promising osteoconductivity and...

   Ahmed Hafedh Mohammed Mohammed, Khairul Anuar Shariff, ... Intan Nirwana in Journal of Materials Research

   Article 13 June 2024
   

9. Polyaniline improves granulation and stability of aerobic granular sludge

   The polyaniline (PANI) material was used to enhance the formation process of aerobic granular sludge (AGS) in this study. The effect of PANI on the...

   Lingfeng Ouyang, Wen Huang, ... Bin Qiu in Advanced Composites and Hybrid Materials

   Article 16 March 2022
   

10. Hydrophobized Granular Materials for Ground Infrastructure

    Functionalizing granular materials to render them hydrophobic allows their use in ground infrastructure to delay or restrict water infiltration and...

    Sérgio D. N. Lourenço, Yunesh Saulick, ... Qi Rui in Materials with Extreme Wetting Properties

    Chapter 2021
    

11. The effect of grinding media on suspensions, microstructures, and comprehensive electrical properties of ZnO varistors

    The aim of this work is to find a proper grinding medium that produce the best suspension of additives in order to fabricated ZnO varistors with...

    Fahimehsadat Abedsaeidi, Akbar Amini, ... Mohammad Maleki Shahraki in Journal of Materials Science: Materials in Electronics

    Article 29 August 2022
    

12. Acoustic Characteristics of Solid Elastic Media with Oriented Microcracking

    Abstract

    We have developed a model of interaction between propagating longitudinal plane elastic waves and an elastic medium containing oriented...

    K. E. Abbakumov, A. V. Vagin, I. G. Sidorenko in Russian Journal of Nondestructive Testing

    Article 01 April 2023
    

13. Engineering the Protective Oxide Chemistry for Enhanced Corrosion Protection Performance of FeCuCrNiCo-CNT Composite Coatings in 3.5 M NaCl Solution Corrosive Media

    Direct electrodeposition method was used to co-electrodeposit different volume fractions of carbon nanotubes in FeCuCrNiCo high entropy alloy matrix....

    Sujata Singh, Chandan Srivastava in Metallurgical and Materials Transactions A

    Article 20 February 2023
    

14. High-Frequency Soft Magnetic Properties of Nano-Granular Cobalt-(Metal-Oxide, Metal-Nitride) Thin Films with Perpendicular Magnetic Anisotropy

    One strategic trend in electronic devices is the greater utilization of limited frequency bands at low GHz frequencies. Nano-granular structured thin...

    Hanae Kijima-Aoki in Surfaces and Interfaces of Metal Oxide Thin Films, Multilayers, Nanoparticles and Nano-composites

    Chapter 2021
    

15. Magnetic Properties of Granular L10 FePt Films for Heat-Assisted Magnetic Recording (HAMR) Applications

    The merit of heat-assisted magnetic recording (HAMR) that enables to increase the recording density beyond the classical perpendicular magnetic...

    Cristian Papusoi, Mrugesh Desai, ... Roy W. Chantrell in Magnetic Measurement Techniques for Materials Characterization

    Chapter 2021
    

16. The Effect of Annealing Temperature on Low-Cycle Fatigue Properties of Thermomechanically Processed Ti-6242S Alloy

    This paper is concerned with the influence of cooling rate after thermomechanical processing and subsequent annealing temperature on the...

    Yavar Mansouri, Peyman Ahmadian in Journal of Materials Engineering and Performance

    Article 13 December 2023
    

17. Modeling of Powder Bed Deformation in the Binder Jetting Technology

    Discrete element modeling of granular media with the binder jetting additive technique is discussed. The main specific feature of this technique is...

    O.P. Maidaniuk, A.L. Maximenko, ... E. Olevsky in Powder Metallurgy and Metal Ceramics

    Article 01 May 2022
    

18. Dynamic Permeability of Composite Media with Nonspherical Ferromagnetic Particles

    Abstract

    A method for calculating the microwave permeability of a magnetized composite with ellipsoidal particles is proposed. The ellipsoid axes are...

    D. V. Perov, A. B. Rinkevich in Physics of Metals and Metallography

    Article 01 February 2022
    

19. Tribocorrosion Behavior and Degradation Mechanism of 316L Stainless Steel in Typical Corrosive Media

    The tribocorrosion behavior and degradation mechanism of 316L stainless steel, in four typically industrial corrosion media, under different...

    Liwen Tan, Zhongwei Wang, Yanlong Ma in Acta Metallurgica Sinica (English Letters)

    Article 20 January 2021
    

20. Waste heat recovery from hot steel slag on the production line: Numerical simulation, validation and industrial test

    Waste heat recovery from hot steel slag was determined in a granular bed through the combination of numerical simulation and an industrial test...

    Tianhua Zhang, Longheng **ao, ... Mei Zhang in International Journal of Minerals, Metallurgy and Materials

    Article 15 November 2023