Search
Search Results
-
Characterization of (AlCrTiVZr)N High-Entropy Coating Produced by Cathodic Arc Evaporation
High-entropy alloy nitride (HEN) coating of (AlCrTiVZr)N was deposited onto 17-4PH stainless steel substrates using the cathodic arc evaporation...
-
Effect of Ni Content on the Microstructure, Performance, and Mechanical Properties of High-Entropy Alloy Nitride (AlCrTiMoVNi)N Coatings Produced by Cathodic Arc Evaporation
High-entropy (AlCrTiMoVNi)N coatings were prepared using cathodic arc evaporation. The target composition was varied to investigate the effect of...
-
Cathodic Arc Evaporation of Self-Lubricating TiSiVN Coatings
This work aimed to evaluate the effect of V addition into TiSiN coatings deposited by an industrial-scale cathodic arc evaporation system on the...
-
The Effect of Negative Bias Voltage on the Microstructure and Hot Corrosion Behavior of Heat-treated NiCoCrAlY Coatings Applied Via the Cathodic Arc Evaporation Physical Vapor Deposition Method
NiCoCrAlY coatings have good corrosion and oxidation resistance in gas turbine blades at elevated temperatures. This study used the cathodic arc...
-
Thermal oxidation resistance of quaternary TiAlCrN coatings prepared with cathodic arc evaporation
In this research, Cr-Al-Ti-N coatings on SKH 51 tool steel were prepared using a cathodic arc evaporation technique. The quaternary (Cr x Al 1−x Ti 0.15 )...
-
Corrosion and Erosion Analysis of AlCrN/CrN Multilayered Coating Applied by Cathodic Arc Physical Vapor Deposition (PVD)
AbstractA multilayered AlCrN/CrN coating was applied on stainless steel C-450 precipitation hardened stainless steel by cathodic arc vapor deposition...
-
Effect of a Gas Medium on the Mechanical, Tribological, and Anticorrosion Properties of Cr–Ni–Al–C–N Coatings Deposited by the Pulsed Cathodic Arc Evaporation Method
AbstractUsing the Cr 3 C 2 –NiAl cathode prepared by self-propagating high-temperature synthesis, Cr‒Ni–Al–C–N coatings are deposited by pulsed cathode...
-
Microstructure and tribomechanical properties of multilayer TiZrN/TiSiN composite coatings with nanoscale architecture by cathodic-arc evaporation
Multilayer TiZrN/TiSiN coatings were deposited on steel substrate by the cathodic-arc evaporation technique. The TiZr (75:25 at. %) and TiSi...
-
Effect of Nitrogen Pressure and Substrate Bias Voltage on Structure and Mechanical Properties of Vacuum Arc Deposited VN Coatings
The binary vanadium–nitrogen (V–N) coatings were formed using cathodic arc evaporation. Two sets of coatings were produced using: (a) nitrogen...
-
A review of plasma-assisted deposition methods for amorphous carbon thin and ultrathin films with a focus on the cathodic vacuum arc technique
Amorphous carbon ( a -C) films have garnered significant attention over the past few decades, principally due to their remarkable thermophysical...
-
Investigation of the Properties of Boron Coatings Obtained by Electron-Beam Evaporation of Pure Boron
AbstractThe method of electron-beam evaporation of a solid target at forevacuum pressure was used to deposit boron coatings several microns thick on...
-
Effects of evaporation-determined model of arc-cathode coupling on weld pool formation in GMAW process simulation
Currently used approaches for modeling the cathodic heat input in gas metal arc welding (GMAW) process simulation are usually based on very...
-
Tribological Characteristics and Corrosion Resistance of Coatings Obtained by Electrospark Alloying, Pulsed Cathodic Arc Evaporation, and Hybrid Technology Using TiCNiCr and TiCNiCr–Dy2O3 Electrodes
AbstractSingle- and double-layer coatings on 40Cr steel substrates have been obtained by electrospark alloying (ESA) and a combination of ESA...
-
Corrosion protection of NiTi alloy via micro-arc oxidation doped with ZnO nanoparticles and polyacrylamide sol–gel sealing
NiTi alloy is considered to have great application potential in the fabrication of metal implant materials. However, the NiTi alloy still suffers...
-
Suppression of arc wandering during cold wire-assisted pulsed gas metal arc welding
The use of pulsed gas metal arc welding (P-GMAW) is fundamental to applications were versatility and control of heat input are required during...
-
Hybrid Technology Combining Vacuum Electrospark Alloying, Cathodic Arc Evaporation, and Magnetron Sputtering for the Deposition of Hard Wear-Resistant Coatings
A novel technology for the deposition of multilayer coatings is proposed. This technology combines electrospark alloying (ESA), pulsed arc...
-
Wire Arc Spraying
Wire arc spraying (WAS) is one of the oldest of thermal spray processes. Compared to alternate surface modification technologies, WAS is most...
-
Investigation of the Correlation between Hydrogen Cathodic Charging Conditions and Toughness Properties of Longitudinal Submerged Arc Welded X65 Pipeline Steels
This research work focuses on the investigation of the correlation between hydrogen cathodic charging conditions and toughness properties of a welded...
-
Synthesis of Metallic Materials by Arc Melting Technique
Arc melting technique, which is widely used for preparation of alloys, intermetallics, and metal-based composites, is discussed in this chapter....
-
Modelling evaporation in electron-beam physical vapour deposition of thermal barrier coatings
This work presents computational models of ingot evaporation for electron-beam physical vapour deposition (EB-PVD) that can be applied to the...
