Search

Search Results

1. Parameter Design of Abrasive Waterjet Machining Process for Machining Al6061/SiC MMC Using Taguchi—Simulated Annealing Algorithm (T-SAA)

   Abrasive waterjet machining (AWJM) is a widely used eco-friendly subtractive manufacturing process for producing a smooth cut surface without...

   N. E. Edwin Paul, M. Santhanakumar, ... M. Naresh Babu in Recent Advances in Materials Technologies

   Conference paper 2023
   

2. Waterjet Cutting of Semi-Finished Products with Use of Secondary Garnet at Stages of Metallurgical Processing

   The paper offers a market analysis and review related to secondary (recycled) garnet produced by recycling sludge using the waterjet cutting...

   S. N. Polyansky, S. V. Butakov, ... V. A. Aleksandrov in Metallurgist

   Article 16 November 2021
   

3. Microstructure and Chemical State Analysis of Ti-6Al-4V Alloy During Abrasive Water Jet Machining Process

   Abrasive water jet machining (AWJM) is a process of cutting soft to hard materials without the use of heat. The three input parameters are waterjet...

   S. Ramakrishnan, D. Lenin Singaravelu, V. Senthilkumar in Recent Advances in Materials Technologies

   Conference paper 2023
   

4. Determination of the Optimal Design of a Wastewater Treatment Plant after Waterjet Cutting

   Abstract

   The analysis of flotation tanks and the composition of waste water after hydroabrasive cutting has been carried out. The most optimal design...

   A. A. Baurov in Steel in Translation

   Article 01 September 2023
   

5. Investigation of Abrasive Hydro Jet Hole Making on INCONEL-825

   Abrasive waterjet (AWJ) technology is a viable production method for machining metal matrices with its own set of benefits. AWJ hole making of...

   P. Sarmaji Kumar, M. Rajesh, ... R. Vijayakumar in Recent Advances in Materials Technologies

   Conference paper 2023
   

6. Optimization of Process Parameters in Abrasive Water Jet Machining of Austempered Ductile Iron (ADI)

   Austempered ductile iron (ADI) is a hard-to-cut material used for a variety of purposes, including flanges in power plants, oil fields and railway...

   V. Sharun, B. Anand Ronald in Journal of Materials Engineering and Performance

   Article 15 June 2023
   

7. Diagnostics of the Surface Layer of Materials by an Abrasive-Liquid Ultrajet

   Abstract

   A method for diagnosing the abrasive resistance of materials is proposed; it consists in high-speed collisions of particles with the surface...

   L. V. Sudnik, A. L. Galinovskii, ... T. N. Borovik in Russian Metallurgy (Metally)

   Article 01 December 2021
   

8. Electric-Pulse Method of Selective Destruction of Synthetic Corundum Abrasive Tool

   Abstract

   The efficiency of electric-pulse disintegration of the scrap of synthetic corundum abrasive wheels is studied under laboratory conditions. At...

   A. N. Danilin, A. S. Zorin, ... D. E. Rivas-Peres in Russian Metallurgy (Metally)

   Article 27 April 2022
   

9. Optimization of AWJC Parameters for Ti-6Al-4V Alloy Using ANN-Based GA and PSO

   The objective of this study is to explore at the geometry of the kerf, surface topography, and surface morphology of titanium (Ti6Al4V) alloy...

   S. Ramakrishnan, D. Lenin Singaravelu, V. Senthilkumar in Recent Advances in Materials Technologies

   Conference paper 2023
   

10. Evaluation of Surface Integrity of Multi-stacked Glass Interplyed with Flax Laminate by Abrasive Waterjet Machining

    This article presents an experimental investigation of surface integrity on glass/flax stacking layered composite machining using an abrasive...

    M. Rajesh, K. Rajkumar, ... K. Ramraji in Advances in Lightweight Materials and Structures

    Conference paper 2020
    

11. Finite Element Simulation of Waterjet-Peened Al 7075-T6 Aluminum Alloy Surface by Using Multiple Droplet Impacts

    This paper presents simulation of waterjet peening process based on finite element (FE) modeling with adjacent water droplet sets, which impact the...

    Rihem Amri, Adnen Laamouri, Raouf Fathallah in Journal of Materials Engineering and Performance

    Article 19 October 2020
    

12. Experimental Study on Machinability of Metal Matrix Composite by Abrasive Water Jets

    The unconventional machining of ceramic reinforced metal matrix composites is innovative. The machinability of aluminium alloy and boron carbide...

    B. Siddharthan, A. Kumaravel in Advances in Materials Research

    Conference paper 2021
    

13. Controlled Depth Milling of Hybrid Aerospace Grade Materials Using Abrasive Water Jet – Critical Review and Analysis

    Due to the expensive price of their structures, both in terms of material and manufacturing costs, aerospace manufacturers prefer to perform repair...

    X. Sourd, R. Zitoune, ... D. Lamouche in Machining and Machinability of Fiber Reinforced Polymer Composites

    Chapter 2021
    

14. Enhanced erosion on sedimentary rock by adding abrasive nanoparticles in ultrasonic cavitation

    Cavitation erosion on sedimentary rocks by addition of abrasive nanoparticles was evaluated through ultrasonic cavitation experiments. Two kinds of...

    Mao Sheng, **nyuan Zhang, ... Shouceng Tian in Applied Nanoscience

    Article 11 February 2020
    

15. Condition Monitoring of Abrasive Waterjet Milling Using Acoustic Emission and Cutting Force Signals

    Abrasive waterjet machining (AWJM) is widely used in the industries with the distinct advantages of no thermal distortion, high flexibility, small...

    U. Goutham, M. Kanthababu, ... R. Balasubramanian in Advances in Forming, Machining and Automation

    Conference paper 2019
    

16. Quantification of the Impact of Forming-Induced Residual Stresses on Subsequent Cutting Operations for Aluminum AA7075 Thick Sheets

    Residual stresses in metal components induced by forming operations significantly influence subsequent manufacturing steps. In particular, two...

    Michael Ott, Moritz Mayer, ... Wolfram Volk in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

17. Abrasive Waterjet Cutting of Lanthanum Phosphate—Yttria Composite: A Comparative Approach

    The objective is to study the effect of Silicon Carbide (SiC) and Garnet of each 80 mesh size when used as abrasives while on machining...

    K. Balamurugan, M. Uthayakumar, ... K. G. K. Warrier in Micro and Nano Machining of Engineering Materials

    Chapter 2019
    

18. Design and Characterization of Kevlar/Epoxy Composites Infused with Silicon Carbide (SiC) – Zinc Oxide (ZnO) Nanofillers

    Fibre reinforced polymerFibre Reinforced Polymer (FRP) compositesComposites are prominent materials used for manufacturing various products due to...

    K. Bupesh Kumar, B. M. Rajaprakash in Composite Materials

    Conference paper 2024
    

19. Optimization of Process Parameters in AWJ Cutting of Pineapple Fiber Reinforced Polymer Composites: Hybrid SCCSA Algorithm

    The present study aims to prepare Pineapple Fiber Reinforced Polymer Composite. The kerf taper angle is then measured by cutting the composite with...

    A. Tamilarasan, T. Rajmohan, ... K. Palanikumar in Bio-Fiber Reinforced Composite Materials

    Chapter 2022
    

20. Structure of Near-Surface Layer of High-Strength Steel Subjected to Abrasive Waterjet Cutting

    Abstract

    This paper presents the results of a study into changes in the structure and microhardness in a near-surface layer of high-strength steel...

    T. I. Tabatchikova, N. A. Tereshchenko, ... N. Z. Gudnev in Physics of Metals and Metallography

    Article 01 September 2018