Search
Search Results
-
Effect of Uniaxial Pre-strain on Room Temperature Tensile and Creep Behavior of Aluminum Alloy AA2219-T87 for Propellant Tanks of Satellite Launch Vehicles
In this study, the effect of uniaxial pre-strain in the range of 1-9%, has been studied on room temperature tensile and creep behavior of aluminum...
-
High Strain Rate Deformation of EBM-Ti–6Al–4V: Microstructure, Texture, Mechanical Properties, Fracture Surface, and Deformation Mechanism
In this study, cylindrical rods of Ti–6Al–4V were additively fabricated through the electron beam melting technique in horizontal and vertical...
-
Effect of Strain Rate on the Formation of Strain-Induced Martensite in AISI 304L Stainless Steel
The effect of strain rate on the stress–strain response and the austenite to strain-induced α′-martensite transformation of austenitic steel 304L was...
-
Families of Stress–Strain, Relaxation and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 2. Relaxation and Stress-Strain Curves
A systematic analytical study of the mathematical properties of the previously constructed nonlinear model for shear flow of thixotropic...
-
Evaluating the Effect of the Carbon Black on the Crack Growth Behavior of Natural Rubber Sheets with Large Deformation and the Strain Distribution
This study evaluates the effect of the carbon black (CB) on the strain distribution in the vicinity of a crack in natural rubber (NR). In addition,...
-
Effect of CNTs on Activation Volume and Mobile Dislocation Exhaustion Rate of CNTs/Al under Compression Loading
In this study, stress relaxation compression tests were performed to investigate the strain rate sensitivity, activation volume and mobile...
-
A Rate-Dependent Damage Mechanics Model on Plasticity and Ductile Fracture Prediction of Automotive Steel Sheets
In this work, tensile tests were performed on H340 and DP1000 steel sheets at various strain rates and temperatures. The displacement, deformation...
-
Effect of cooling rate during solidification on structure and mechanical properties of Cu45Zr48Al7 glass-forming alloy
The CuZr-based bulk metallic glass matrix composites have attracted great attention in recent years owing to their unique mechanical properties...
-
Effect of Cooling Rate on Microstructure and Mechanical Properties of a Microlaminated Low-Density Steel
In this study, the effect of the cooling rate on the microstructure and mechanical properties of Fe-4Al-2.5Mn-2Ni-0.18C (wt.%) low-density steel was...
-
Material Characterization of 550D Reinforcing Steel Bar at High Strain Rates
Reinforcing steel bars play a crucial role in reinforced concrete constructions. To comprehend the behavior of reinforced concrete structures under...
-
Investigation on the High Strain Rate Formability of Al-Cu-Mg Alloy by Solid–Liquid Coupling Simulation
The formability of the sheet is getting more attention these several years for the impact hydroforming (IHF)Impact hydroforming. Investigation on the...
-
Effect of hydrostatic strain on the thermal conductivity of β-SiC: A combined molecular dynamics and lattice dynamics investigation
SiC is quite often used in a variety of industrial scenarios because of its superior mechanical and thermal properties. Strain in SiC materials is...
-
Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy
The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si alloy through a high...
-
The Use of Strain-Induced Martensitic Transformation Phenomena to Estimate the Surface Plastic Strain Produced by Grit Blasting on Overaged 18Ni Maraging Steel
In the present study, strain-induced martensitic transformation has been used to estimate plastic strain resulting from grit-blasting in 18Ni(300)...
-
A composite hydrogel exhibiting stiff response at low-strain regime by repulsion effect of positive/negative Poisson’s ratio
The application of hydrogels as substitutes for load-bearing tissues has garnered considerable attention. In contrast to load-bearing tissues, which...
-
Uniform strain high-pressure torsion (US-HPT): an approach to reduce strain gradients
Based on the pioneering work of Erbel, we propose a simple modification of classical high-pressure torsion anvils that allows a strong reduction or...
-
Evaluation of the Viscoplastic Strain of High-Density Polyethylene/Multiwall Carbon Nanotube Composites Using the Reaction Rate Relation
A novel semiempirical method for separating the viscoplastic strains from the total creep strains is proposed and validated by examples of...
-
Multiaxial Failure Stress Locus of a Polyamide Syntactic Foam at Low and High Strain Rates
The mechanical response of a polyamide syntactic foam under combined tension-torsion loading is measured experimentally at quasi-static (10−3 s−1)...
-
Effect of Strain on Hot Deformation Behavior and 3-D Processing Maps of a Vanadium and Titanium Microalloyed Steel
The hot deformation behavior of a V-Ti microalloyed steel was studied via hot compression testing at the deformation temperature of 900-1050 °C,...
-
Effects of strain rate on the microstructure and texture evolution of a TRIP-TWIP metastable austenitic stainless steel during bending
Microstructure evolution, deformation-induced martensitic transformation and texture evolution were investigated in a metastable austenitic stainless...
