Search
Search Results
-
Facile and simple deposition of cobalt oxide onto oxidized multiwall carbon nanotubes for electrocatalytic oxygen reduction
Cobalt oxide (CoOx) nanoparticles were synthesized onto oxygenated carbon nanotubes (FCNTs) using a simple cyclic voltammetry technique, and used as...
-
Fabrication of superhydrophobic PET filter material with fluorinated SiO2 nanoparticles via simple sol–gel process
A high moisture content in the flue gas of iron and steel sintering process causes the issue of filter material pasting, which leads to a decrease in...
-
Vibrating Tool Path Design for New Multi-axial Vibration Assisted Incremental Sheet Forming
In this study, a new multi-axial vibration assisted incremental sheet forming (MV-ISF) process is introduced by develo** a vibrated toolpath and an... -
Simple Theoretical Model for Growth by the VQS Mechanism
Taking the porosityPorosity of the FECAForeign Element Catalytic Agents (FECAs) nanoparticleNanoparticle surface into accountRate, a simple... -
Dielectric properties of BaTiO3 nanocrystals synthesized by ambient-condition-sol process at low temperatures
Barium titanate nanocrystals were synthesized via an ambient-condition-sol (ACS) process using low temperature heat reflux. The prepared nanocrystals...
-
Simple, rapid, and accurate malaria diagnostic platform using microfluidic-based immunoassay of Plasmodium falciparum lactate dehydrogenase
This work reports on a rapid diagnostic platform for the detection of Plasmodium falciparum lactate dehydrogenase ( Pf LDH), a representative malaria...
-
A simple approach with scale-up potential towards intrinsically flame-retardant bio-based co-plasticizer for PVC artificial materials
AbstractAs an imitation of genuine leather, polyvinyl chloride (PVC) artificial materials are versatile, but suffers from being flammable due to the...
-
Effect of metal source variation in cuprous oxide thin films deposited by chemical bath deposition
In this study, the effect of copper source in cuprous oxide thin films deposited by chemical bath deposition is presented. The replacement of copper...
-
A Comparative Study of Electrochemical Capacitance of Graphene Oxide Affected by Oligomers of p-phenylenediamine and Hydrazine Hydrate in Solvothermal Condition
A systematic investigation of the graphene oxide composite reduced by either p -phenylenediamine oligomers or hydrazine hydrate was performed with...
-
A simple and novel synthetic route to prepare anatase TiO2 nanopowders from natural ilmenite via the H3PO4/NH3 process
A simple and novel technique for the preparation of anatase TiO 2 nanopowders using natural ilmenite (FeTiO 3 ) as the starting material is reported....
-
A Simple Glassy Polymer Model
This work presents a simple and robust material model, suitable for dynamic simulations of glassy polymers such as Polycarbonate. The new model...
-
A simple method for determination of mercury (II) ions by PNBS-doped carbon dots as a fluorescent probe
A simple and efficient fluorometric method is described for detecting mercury (II) ions. Carbon quantum dots doped with nitrogen, sulfur, phosphorus,...
-
High-performance aqueous asymmetric supercapacitors based on K+ and Na+ co-preinserted δ-MnO2 nanocrystals
Layed δ-MnO 2 nanocrystals are fabricated through a facile precipitation reaction at ambient conditions with Na 2 SO 3 as reductant. The high content of...
-
Modeling and Diagnosis of Induction Machines Operating under Open-Phase Fault
AbstractThis paper presents a new approach for the modeling and diagnosis of the induction machines (IM) operation under open-phase fault. This fault...
-
Understanding Annealing Behavior During Post-Built Heat Treatment of Ni-Based Alloys Across Additive Manufacturing Processes
Ni-based alloys are used for high temperature structural components that span from small, highly complex, with fine feature resolution to large,... -
ZnSe:Cu/ZnS:Cu quantum dots (QDs): synthesis via a simple UV-assisted approach and investigating optical properties
In this report, first, ZnSe:Cu QDs have been grown by a simple, rapid, and room temperature UV-assisted approach. Then by a one-pot approach,...
-
Continuous high-flux synthesis of gold nanoparticles with controllable sizes: a simple microfluidic system
Noble metal nanoparticles (NPs) have potential for use in many optical and electronic applications due to their shape- and size-dependent properties....
-
A low reflection absorbent conductive carbon black-coated BaZn2Fe16O27 composite covering X and Ku bands
Conductive carbon black-coated BaZn 2 Fe 16 O 27 composite absorbent was successfully prepared by a simple mechanical blending method. The phase...
-
Shear Deformation Behavior of Heterostructured Materials: Experimental and Numerical Analyses
In this study, the heterogeneous strengthening behavior in shear deformation was experimentally characterized and numerically modeled for the first...
-
Temperature Evolution, Material Flow, and Resulting Mechanical Properties as a Function of Tool Geometry during Friction Stir Welding of AA6082
The friction stir welding process was simulated for joining AA6082 aluminum alloy with the use of the computational fluid dynamics method. Two...