Search
Search Results
-
Formability and Spring-Back of Light Metals at High Strain Rates
Formability or plasticity of light metals, such as aluminum alloys and titanium alloys, are quite strain rate sensitive. For most normal plastic...
-
Effect of Pre-accumulated Plastic Strain on Stress Corrosion Cracking and Fatigue Life of Steels – Experiment and Modeling
Steel structures may experience localized plastic strains arising from a wide range of service anomalies. Regions of accumulated plastic strain are...
-
Dynamic Fracture Behavior of Layered Composite Under High Strain Rate Loading
Protecting military bunkers against projectile impact in the hilly region is of serious concern. These bunkers are generally constructed using...
-
Investigating Microstructural and Microchemical Effect of Aging on Cu-rich Phase of 304HCu SS Exposed to Chloride Environment by Slow Strain Rate Testing Technique
SS 304H Cu has been selected as a candidate material for superheater, and reheater tubing in advanced ultra-supercritical (AUSC) boiler applications...
-
Study of the Dynamic Recrystallization Process of 347H Stainless Steel at High Strain Rate
The true stress–strain curves and constitutive equations of 347H austenitic stainless steel were obtained via high temperature compression tests with...
-
Optimized Strength of Chopped Strand Mat Glass Fiber-Reinforced Polyester Laminates with Single-Edge Notch under the Effects of Notch Shape/Size and Strain Rate
The chopped strand mat (CSM) glass fiber-reinforced polyester composite is commonly used for building and repairing in various industrial fields. Its...
-
Effect of Die Profile on Strain Inhomogeneity During Constrained Groove Pressing
Constrained groove pressing using conventional dies with groove angle of 45° imparts shear deformation within the material and repetitive pressings...
-
Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects
Miniature cantilevers are associated with amplification in strain gradient and dislocation recovery. These contrasting phenomena interplay to impart...
-
Influence of substrate-induced strain on exchange bias effect in YSMO/LSMO heterostructures
Magnetic properties of Y 0.67 Sr 0.33 MnO 3 (YSMO) and La 0.67 Sr 0.33 MnO 3 (LSMO) thin films heterostructures (YSMO/LSMO) deposited on single-crystalline...
-
Microstructure-Induced High-Strain-Rate Deformation Behavior of Heat-Treated 17-4 PH Stainless Steel
The present investigation focuses on the effect of heat treatment parameters on the hardening and fracture behavior of 17-4 PH stainless steel,...
-
Deformation and Failure Behavior of Steel Under High Strain Rate and Multiaxial Loading
In order to model a vehicle crash event using the finite element method (FEM), accurate material properties at high strain ratesStrain rate are...
-
Effect of Welding Inclination Angle on Strain Distribution of X80 Pipeline Steel Welded Joint in Mountain Environment
In the laboratory environment, it is possible to weld inclined pipes with an inclination angle of 30° or even larger angles and achieve good...
-
In-Situ X-ray Diffraction Analysis of Metastable Austenite Containing Steels Under Mechanical Loading at a Wide Strain Rate Range
This paper presents and discusses the methodology and technical aspects of mechanical tests carried out at a wide strain rate range with simultaneous...
-
Effect of Strain Rate on the Microstructure and Mechanical Properties of AA2B06-O Aluminum Alloy of the Al–Cu–Mg System
The mechanical properties in the tension and microstructure of aviation aluminum alloy AA2B06-O (the Al–Cu–Mg system) at low (10 –3 –1 s –1 ) and high...
-
Mechanical Properties and Damage Behavior of Polypropylene Composite (GF50-PP) Plate Fabricated by Thermocompression Process Under High Strain Rate Loading at Room and Cryogenic Temperatures
This paper concerns the coupling effect of strain rate and temperature on the damage mechanical properties of the long-glass-fiber-reinforced...
-
Modeling the Effect of Backstress on Springback Predictions in AA 6016-T4 as a Function of Pre-strain
This paper explores springback levels in AA6016-T4 sheets that were first pre-strained to various levels in uniaxial, plane-strain, and biaxial...
-
Dynamic Properties of Low-Alloyed Copper Alloys with Submicrocrystalline Structure Obtained by High Strain Rate Deformation
Abstract—The mechanical properties of alloys Cu–0.03 wt % Zr and Cu–0.10 wt % Cr with a submicrocrystalline structure formed after dynamic channel...
-
Effect of Hot-Pressing Rate on Interface and Bonding Strength of Mg/Al Composite Sheets with Zn Interlayer
In this work, the AZ31/1060 laminated metal composites with Zn interlayer were successfully prepared by hot pressing with a strain of 47% in the...
-
Effect of Rolling Temperature on Martensitic Transformation and Strain Hardening of Fe–21.2Mn–0.68C Steel
In this work, the temperature dependence of the stacking fault energy (SFE) of Fe–21.2Mn–0.68C steel was calculated using the thermodynamic model....
-
Effect of Strain Hardening on Wear and Corrosion Resistance of 316L Austenitic Stainless Steel
The wear and corrosion resistance of 316L austenitic stainless steel after strain hardening were studied. 316L austenitic stainless steel was...
