Search

Search Results

1. Effect of Fe₂O₃ on the Structure, Physical Properties and Crystallization of CaO-Al₂O₃-SiO₂ Glass

   The calcium aluminosilicate-based glasses (CaO-Al ₂ O ₃ -SiO ₂ , CAS) with different Fe ₂ O ₃ content (0.10wt%, 0.50wt%, 0.90wt%, and 1.30wt%) were prepared...

   Feng Zhang, Dehua **ong, ... Tengfei Sun in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 05 July 2024

2. Fabrication and photocatalytic evaluation of Cr-doped-ZnO/S-g-C₃N₄ nanocomposite: exploiting the synergistic effect for efficient environmental remediation

   In this study, an effective Cr-ZnO/SGCN photocatalytic composite has been successfully fabricated by coupling chromium-doped zinc oxide nanoparticles...

   Fatima Tahir, Mohsin Javed, ... Matar Alshalwi in Journal of Materials Science: Materials in Electronics

   Article 17 June 2024
   

3. Investigation of the Structural and Optical Properties of g-C₃N₄/ZrO₂ Nanocomposites

   This study used ultrasonication method to prepare graphitic carbon nitride (g-C ₃ N ₄ )/zirconium oxide (ZrO ₂ ) nanocomposites with varying ratios....

   Manas Nasit, Ankush Vij, ... Shalendra Kumar in Journal of Electronic Materials

   Article 22 April 2024
   

4. Rietveld refinement and magnetic characterization of nanospheric CoFe₂O₄ prepared under the effect of ethylene glycol and H₂O

   Cobalt ferrite nanoparticles (CF NPs) have received appreciable interest recently due to their impressive chemical stability, high coercivity, and...

   Amel Mohamed Abouelnaga, Ali B. Abou Hammad in Journal of Sol-Gel Science and Technology

   Article 08 July 2024
   

5. Revelation of fluorophore impurities among biocompatible blue fluorescent carbon nanodots derived from Hemigraphis alternata plant and bioimaging

   The rapid synthesis techniques and interesting multidisciplinary applications make carbon nanodots (CNDs) stand out from semiconductor quantum dots....

   H. Manisha, M. Velayudham, ... K. Sudhakara Prasad in Carbon Letters

   Article 16 February 2023
   

6. Photocatalytic Activity and Mechanical Performance of O and N Co-doped TiO₂ Thin Films

   Amorphous TiO ₂ films were deposited on non-alkali glass by reactive radio-frequency magnetron sputtering using a TiO ₂ ceramic target. This study...

   Weimin Tang, Chih-Chung Hu, ... Chun-Yao Hsu in Journal of Electronic Materials

   Article 18 August 2022
   

7. Phase Control of Typical Impurities in Hazardous Selenium Waste and Preparation of High-Purity Selenium During Pre-oxidation and Vacuum Distillation Process

   Hazardous selenium waste (HSW) contains the highly toxic element selenium and valuable metal, which will cause serious environmental pollution and...

   Huan Luo, Lang Liu, ... Baoqiang Xu in Metallurgical and Materials Transactions B

   Article 11 November 2022
   

8. Effective and highly sunlight response g-C₃N₄/CuS heterojunction photocatalyst for the degradation of tetracycline antibiotic

   A wet impregnation technique was utilized to synthesize g-C ₃ N ₄ /CuS heterojunction. The crystalline structure, functional groups, morphology,...

   E. V. Siddhardhan, Ananth Steephen, T. Arumanayagam in Journal of Materials Science: Materials in Electronics

   Article 26 May 2023
   

9. Sustainable synthesis of hierarchical porous N, O-codoped carbon nanorods with pseudocapacitance contribution for lithium-ion battery anodes and supercapacitors

   A green and sustainable approach was employed to synthesize N, O-codoped porous carbon nanorods with two-end-open characteristics. In this method, a...

   Lixia Liao, Jiyuan Zhang, ... Benmei Wei in Journal of Materials Science

   Article 29 January 2024
   

10. Effect of Ni do** on the microstructure and electrical properties of Ba–Co–O NTC ceramics

    A novel perovskite BaNi _x Co _1‒x O _3‒δ (0 ≤ x ≤ 0.1) Negative Temperature Coefficient thermal ceramic material has been successfully synthesized using a...

    Hao Wang, Shuangji Feng, ... Aimin Chang in Journal of Materials Science: Materials in Electronics

    Article 02 July 2024
    

11. Effect of Nano-Cr₂O₃ Dispersed W-Zr Alloys by Mechanical Alloying and Pressureless Conventional Sintering

    Mechanical alloying is a preferred approach for producing tungsten (W)–zirconium (Zr)-based alloys due to their vast difference in melting point and...

    Bappa Das, Atiqur Rahman Khan, Anshuman Patra in Journal of Materials Engineering and Performance

    Article 06 June 2023
    

12. Electrical Characterization of Semiconductors: I–V, C–V and Hall Measurements

    This chapter presents characterization techniques to study the electrical properties of semiconductors. For electrical measurements, a good...

    Alexander Azarov, Anders Hallén, Henry H. Radamson in Analytical Methods and Instruments for Micro- and Nanomaterials

    Chapter 2023
    

13. Preparation and properties of Sn composite C-coated Li₄Ti₅O₁₂ materials for lithium–sulfur battery anodes

    Li ₄ Ti ₅ O ₁₂ (LTO) is a very prospective anode material for lithium–sulfur batteries (LSBs) due to its ability to effectively suppress the “shuttle...

    Zuming He, Long Shen, ... Zhengyi Huang in Journal of Materials Science: Materials in Electronics

    Article 06 January 2024
    

14. Weakening CO poisoning over size- and support-dependent Pt_n/X-graphene catalyst (X = C, B, N, n = 1–6, 13)

    CO poisoning is one of the obstacles for platinum catalysts toward the electro-catalysis process for proton exchange membrane fuel cell (PEMFC) or...

    An-Qi Dong, Hui Li, ... Wei-Bo Hu in Rare Metals

    Article 06 January 2023
    

15. In situ construction of N-rich carbon nitride (C₃N₅)/silver phosphate (Ag₃PO₄) S-scheme heterojunctions for the efficient photocatalytic removal of levofloxacin antibiotic and RhB

    Building step-scheme (S-scheme) heterojunctions has recently emerged as a highly effective approach for develo** superior photocatalysts for water...

    **aodong Liu, Yuanfei Li, ... Shijie Li in Carbon Letters

    Article 16 May 2024
    

16. Effect of Na₂O on Viscosity, Structure and Crystallization of CaF₂–CaO–Al₂O₃–MgO–TiO₂ Slag in Electroslag Remelting

    Abstract

    The effect of Na ₂ O on the viscosity, structure, and crystallization behavior of CaF ₂ –CaO–Al ₂ O ₃ –MgO–TiO ₂ slag was studied using the rotating...

    Jian-tao Ju, Kang-shuai Yang, ... Kun He in Russian Journal of Non-Ferrous Metals

    Article 29 December 2022
    

17. Potentiodynamic electrodeposited M_nO₂:Co₃O₄ thin films electrodes for supercapacitor application

    The existing research explores the effect of annealing temperature on manganese oxide incorporated cobalt oxide thin films synthesized on stainless...

    S. V. Khavale, R. C. Ambare, ... B. J. Lokhande in Journal of Materials Science: Materials in Electronics

    Article 15 June 2023
    

18. Effect of P₂O₅ Impurities and Fluoride Ions on The Rheological Properties of Porous Glasses and Bismuth-Containing Composites Based on Them

    Abstract

    The results of a study of the rheological properties (shrinkage on heating, viscosity) of porous glasses (PGs) obtained as a result of...

    T. V. Antropova, S. V. Stolyar, ... M. A. Girsova in Glass Physics and Chemistry

    Article Open access 01 July 2021
    

19. Effect of PbO impurities on the structural and physical properties of CeCu@Na₂B₄O₇ glasses: For shielding and terahertz applications

    In this work, the effect of the PbO additives on the structure, optical, and optoelectronic properties of some cerium copper sodium-borate glass have...

    Hosam M. Gomaa, H. A. Saudi, ... H. Y. Zahran in Journal of the Australian Ceramic Society

    Article 08 June 2022
    

20. Loading Fe₃O₄ nanoparticles on N, S co-doped graphene suppressing polysulfides conversion toward high-performance Li–S batteries

    Lithium–sulfur (Li–S) batteries are the most potential energy storage system due to their high theoretical specific energy/capacity, environment...

    Juan Li, Youlong Xu, ... **anghua Yao in Journal of Materials Science

    Article 01 March 2023