Search
Search Results
-
Aerosol Deposition of CuFeO2 Photocathode Coatings for Hydrogen Production
Photoelectrochemical (PEC) water splitting is a viable route for green hydrogen generation. In PEC cells, the electrodes are coated with suitable...
-
Microstructure and Tribological Behavior of Low-Temperature HVAF Ti6Al4V Coatings
Ti-6Al-4 V is commonly used in gas turbine engines and is sometimes subject to wear during operation. To address this, cost-effective and...
-
A Critique on the Role of Object-Oriented Finite Element Analysis (OOF2) in Predicting Thermal and Mechanical Properties in Thermal Sprayed Coatings
Microstructural modeling at progressive length scales can enable the prediction of thermal and mechanical properties of thermal sprayed coatings with...
-
Optimizing the Corrosion Resistance of Cold Spraying Additive Manufactured FeCoNiCrMn High Entropy Alloy: Improving Particle Bonding Quality Through Heat Treatment
The cumulative deposition characteristic of deformed particles in the cold spray (CSAM) deposits forms unique open pore microstructure and poor...
-
Study of the Propane Detonation Spraying under Different Gun Structures
Detonation spraying is a technique that uses the high-temperature, high-velocity detonation waves to deposit the molten metal particles onto the...
-
Investigation on the Microstructure Evolution and Properties of a Novel In-Situ Fiber Phase-Reinforced Nickel Composite Coating Deposited by Wide-Band Laser
In this paper, a novel hard nickel composite coatings were fabricated by wide-band laser cladding technique. The effects of Si alloying on the...
-
Effect of Low Plasma Spraying Power on Anode Microstructure and Performance for Metal-Supported Solid Oxide Fuel Cells
Metal-supported solid oxide fuel cells have broad application prospects in distributed power generation, transportation, military, and other fields....
-
Trade-Off Among Cavitation Erosion Resistance, Corrosion Resistance, and Antifouling Properties of HVOF-Sprayed WC-CoCr Coating via Adding Stainless Steel and Copper
This work investigated the trade-off among cavitation erosion resistance, corrosion resistance, and antifouling properties in HVOF-sprayed WC-10Co4Cr...
-
Process Optimization and Influencing Factors of Supersonic High-Energy Plasma Spraying of Al2O3-PF Composite Coatings on Polymer Matrix Composite Surface
A high-performance Al 2 O 3 -PF composite coating was prepared on the surface of polymer matrix composite materials using supersonic high-energy plasma...
-
Study on the Effect of Laser Remelting Energy Density on the Microstructure and Wear Resistance of Fe-Based Alloy Coatings Fabricated by Laser Cladding
In this work, Fe-based alloy coatings were prepared on the surface of ductile iron by laser cladding. To improve its wear resistance and consider the...
-
The Microstructure, Surface Topography and Wear Resistance of Cold-Sprayed (Cr3C2-25(Ni20Cr))-(Ni-graphite) Composite Coatings Modified by Diode Laser Treatment
Cold-sprayed composite coatings have several advantages; however, some properties, such as hardness and abrasion resistance, are lower than those in...
-
Study on the Wear and Corrosion Resistance of CoCrFeNiTi0.8-xcBN Laser Cladding Coatings
This work aimed to explore the effect of cBN (cubic boron nitride) content on the microstructures and wear-corrosion resistance of the CoCrFeNiTi 0.8 -x...
-
Influence of Different Copper Feedstock Powders on the Microstructure and Corrosion Resistance of Coatings Prepared by Cold Gas Spray
The purpose of this study is to investigate the effect of copper powder oxidation on the deposition efficiency, microstructure, wear and corrosion...
-
Devitrification-Induced Tailoring of Microstructure and Strength in Aluminum High-Entropy Alloy Powder for Cold Spray Deposition
The development of high-strength cold spray deposits using amorphous/nanocrystalline aluminum high-entropy alloy (Al HEA) powder is hindered by the...
-
Effect of Laser Remelting on the Microstructural and Mechanical Properties of High-Velocity Oxy-Fuel (HVOF)-Sprayed WC-NiCr Coating
WC-based coatings are found efficient in providing excellent tribological properties to the structures and components subjected to harsh wear and...
-
Effect of WC-10Co-4Cr Reinforcement Amount on Wear and Corrosion Resistance of Fe-Based Amorphous Coatings
WC-10Co-4Cr/Fe-based amorphous composite coatings with different WC-10Co-4Cr powder contents (0-12 wt.%) were prepared on C45 steel by plasma...
-
Comparative Study on the Microstructure and Properties of 304 Stainless Steel Coatings Prepared by High-Velocity Oxygen Fuel Spraying and Air Plasma Spraying
The 304 stainless steel coatings were applied to a 6061-T6 aluminum alloy substrate using high-velocity oxygen fuel spraying (HVOF) and air plasma...
-
High-Temperature Corrosion Characterization of Ni-Al Laser Cladding: The Effect of Al Content and Fe
To further enhance the high-temperature corrosion resistance of boiler tubes for improved power generation efficiency of biomass and waste-to-energy...
-
Slurry Abrasion and Dry Sliding Behavior of High-Velocity Oxy-Fuel (HVOF) Sprayed WC-12Co and WC-10Co-4Cr Coatings on EN8 Tillage Material
This research focuses on enhancing the wear resistance of EN8 steel, commonly used in agricultural implements by applying WC-12Co and WC-10Co-4Cr...
